skuba@9.1.0

Minor Changes

• deps: Drop strip-ansi dependency in favour of util.stripVTControlCharacters (#1713)

• lint, format, template: Use pinned pnpm version in Dockerfiles (#1714)

  This fixes an issue where pnpm commands in Dockerfiles incorrectly use the latest pnpm version instead of the pinned version.

Patch Changes

• template/lambda-sqs-worker-cdk: Align template with Serverless template (#1577)

  This adds the same boilerplate code available in lambda-sqs-worker along with Datadog integration.

• deps: libnpmsearch ^8.0.0 (#1698)

skuba@9.0.1

Patch Changes

• lint, format: Put back logic which skips autofixing Renovate branches when there is no open pull request. (#1699)

  Previously, this was put in place to prevent an issue where a Renovate branch can get stuck in the Edited/Blocked state without a pull request being raised. This was subsequently removed because Skuba's default autofix commits were ignored by skuba's recommended renovate configuration.

  However, this has resulted in some build-rebase-build-rebase-... loops, and so the Renovate config change has been reverted, and requires investigation before reinstating.

skuba@9.0.0

skuba 9 is a reasonably large release but it shouldn't be too much trouble to upgrade.

The main changes are:

• ESLint 9 and flat config migration (where skuba format should handle most of the work)
• Swapping out ts-node for tsx
• Some fixes in Buildkite & Docker files

Read the full changelog:

Major Changes

• deps: ESLint 9 + typescript-eslint 8 (#1537)

  This major upgrade bundles the following changes:

  • Migration to flat config format

    skuba format will attempt to migrate your existing .eslintignore and .eslintrc.js files to a flat eslint.config.js file.

    See the migration guide for more information.

  • Some lint rules have been changed or renamed

    You will likely need to manually review and adjust your code after running skuba lint.

  • eslint-plugin-import has been replaced with eslint-plugin-import-x

    To migrate, replace references to eslint-plugin-import with eslint-plugin-import-x, and import/ rules with import-x/.

  Wider changes may be necessary if your project has a custom ESLint configuration. Refer to the following resources to get started:

  • ESLint 9
  • typescript-eslint 8

• node, start: Replace ts-node with tsx (#1623)

  skuba node and skuba start now use tsx instead of ts-node to execute TypeScript files.

  tsx improves support for ESM features like dynamic import()s. However, if you use its REPL by running skuba node without any arguments, there are a couple regressions to note:

  • Static import declarations are no longer supported. Use require and await import() instead.
  • Pasting code into the editor may be more finicky by default. Consider using .editor mode.

  skuba node <file> and skuba start should continue to work as expected, but we have marked this as a major upgrade as it is difficult to comprehensively test every scenario. We strongly recommend to manually verify usage of skuba node and skuba start when you upgrade.

Minor Changes

• format, lint: Point Docker base images to AWS ECR Public and remove constant --platform arguments (#1684)

  This updates references to node: or python: Docker images in your Dockerfiles and docker-compose.yml files to point to AWS ECR Public to avoid Docker Hub rate limiting. It also removes constant --platform arguments from Dockerfiles.

  - FROM --platform=arm64 node:20-alpine AS dev-deps
  + FROM public.ecr.aws/docker/library/node:20-alpine AS dev-deps

  Your Dockerfiles may not be set up to build multi-platform images, so keep in mind that building them locally on an Intel x86 laptop may not yield images that can execute on AWS Graviton instances.

• format, lint: Remove obsolete version field from docker-compose.yml files (#1638)

• format, lint, template: Mount Buildkite .npmrc in /tmp/ rather than <workdir>/tmp/ (#1693)

  This avoids accidental inclusion in Git commits or published artifacts, as per the original intent of this handling.

  - secrets: id=npm,src=tmp/.npmrc
  + secrets: id=npm,src=/tmp/.npmrc
  
  - output-path: tmp/
  + output-path: /tmp/

• deps: TypeScript 5.6 (#1655)

  This major release includes breaking changes. See the TypeScript 5.6 announcement for more information.

• format, lint: Fix duplicated YAML merge keys in .buildkite/ pipelines (#1537)

  - - <<: *deploy
  -   <<: *docker
  + - <<: [*deploy, *docker]
      label: stuff

  This change supports standardised YAML parsing across tools such as ESLint; it should not functionally alter the behaviour of your build pipeline.

  The bundled patch is fairly conservative and will not attempt to migrate more complex scenarios, such as where there are other keys between the merge keys. Take care with preserving the order of merge keys when manually updating other occurrences.

  - - <<: *deploy
  + - <<: [*deploy, *docker]
      label: stuff
  -   <<: *docker

• format, lint: Remove logic to skip autofixing Renovate branches when there is no open pull request (#1687)

  Previously, this was put in place to prevent an issue where a Renovate branch could get stuck in an Edited/Blocked state without a pull request being raised.

  skuba's default autofix commits are now ignored in our recommended Renovate configuration.

Patch Changes

• template/koa-rest-api: Switch from koa-bodyparser to @koa/bodyparser (#1605)

• template/koa-rest-api: Enable secure headers middleware by default (#1601)

  See the Koala documentation for more information.

• template/lambda-sqs-worker-cdk: Comply with AWS tagging guidance (#1643)

• api: Truncate Buildkite annotations over 1 MiB to resolve buildkite-agent crash (#1645)

• deps: validate-npm-package-name ^6.0.0 (#1682)

• deps: normalize-package-data ^7.0.0 (#1681)

• deps: esbuild ~0.24.0 (#1671)

• deps: concurrently ^9.0.0 (#1666)

• template/lambda-sqs-worker-cdk: Replace custom hooks with @seek/aws-codedeploy-infra (#1644)

• template: Point Docker base images to AWS ECR Public and remove constant --platform arguments (#1684)

eslint-config-skuba@5.0.0

Major Changes

• ESLint 9 + typescript-eslint 8 + eslint-config-seek 14 (#1537)

  This major upgrade bundles the following changes:

  • Migration to flat config format

    See the migration guide for more information.

  • Some lint rules have been changed or renamed

    You will likely need to manually review and adjust your code after running ESLint.

  • eslint-plugin-import has been replaced with eslint-plugin-import-x

    To migrate, replace references to eslint-plugin-import with eslint-plugin-import-x, and import/ rules with import-x/.

  Wider changes may be necessary if your project has a custom ESLint configuration. Refer to the following resources to get started:

  • ESLint 9
  • typescript-eslint 8

Minor Changes

• Disable @typescript-eslint/only-throw-error in test files (#1689)

skuba@8.2.1

Patch Changes

• template: Remove JSON schema definitions from Buildkite pipeline files (#1624)

  This reverts #1611 due to incompatibility with pipeline signing.

• template: docker-compose v5.3.0 (#1620)

• template/lambda-sqs-worker-cdk: Fix deploy:hotswap script (#1616)

• deps: esbuild 0.23 (#1610)

skuba@8.2.0

Minor Changes

• format, lint: Set package-manager-strict-version=true for pnpm projects (#1572)

Patch Changes

• configure: Fix [object Object] output appearing during skuba configure (#1597)

• template/koa-rest-api: Clean up src/app.test.ts (#1606)

• template: Add JSON schema definitions to Buildkite pipeline files (#1611)

• deps: @octokit/rest ^21.0.0 (#1599)

skuba@8.1.0

Minor Changes

• lint: Skip generation of config files when present in .gitignore (#1554)

  skuba lint and skuba format now skip the generation of config files, like .dockerignore and .npmrc, if they are ignored by .gitignore files.

• deps: esbuild 0.21 (#1569)

• deps: TypeScript 5.5 (#1596)

  This major release includes breaking changes. See the TypeScript 5.5 announcement for more information.

• api: Add Git.isFileGitIgnored (#1554)

• lint: Add coverage to .prettierignore (#1552)

• configure: Accept template data from stdin to allow for integration testing (#1558)

• lint: Swap out detect-package-manager for manual lockfile detection (#1552)

  detect-package-manager has been removed, in lieu of using find-up to detect the closest
  pnpm-lock.yaml or yarn.lock to infer the package manager.

• lint: Patch installing specific pnpm version via Corepack (#1534)

• deps: prettier 3.3 (#1580)

Patch Changes

• template: Add extension recommendations to .vscode/extensions.json (#1556)

• Git: Explicitly declare return types to enable compatibility with the Node16 module (#1589)

• template/oss-npm-package: Skip excessive action runs (#1586)

• template/lambda-sqs-worker-cdk: Add worker config file (#1548)

• lint: Exclude .vscode/extensions.json from being ignored by .gitignore (#1556)

• template: Make all configuration values explicit (#1560)

  Previously, src/config.ts included optional configuration values and inheritance between environments in the spirit of DRY. While the templated file was wired up in a "safe" way—the production environment never inherited from other environments and explicitly specified all its configuration values—its pattern was misappropriated elsewhere and led to local configuration values affecting production environments.

  Instead, we now list all configuration values explicitly against each environment.

• template: Remove deprecated docker-compose.yml version (#1570)

  Docker has ignored this for a while, and now generates a warning on every build:
  https://github.com/compose-spec/compose-spec/blob/master/04-version-and-name.md

• template/*-rest-api: Clean up templated environment variables (#1562)

  • AWS_NODEJS_CONNECTION_REUSE_ENABLED is no longer required with AWS SDK V3.

  • The env boilerplate in Gantry values files was largely unnecessary and confusing.

    Our templates prefer to declare configuration values directly in src/config.ts.

eslint-config-skuba@4.1.0

Minor Changes

• deps: eslint-plugin-tsdoc 0.3.0 (#1579)

• deps: @typescript/eslint ^7.14.1 (#1596)

  This addresses compatibility with TypeScript 5.5

• deps: eslint-plugin-jest 28 (#1538)

skuba@8.0.1

Patch Changes

• deps: eslint 8.56.0 (#1521)

  This upgrade is required for eslint-config-seek 13.

• template: Install specific pnpm version via Corepack (#1515)

  Previously, our Dockerfiles ran corepack enable pnpm without installing a specific version. This does not guarantee installation of the pnpm version specified in package.json, which could cause a subsequent pnpm install --offline to run Corepack online or otherwise hang on stdin:

  FROM --platform=arm64 node:20-alpine
  
  RUN corepack enable pnpm

  {
    "packageManager": "pnpm@8.15.4",
    "engines": {
      "node": ">=20"
    }
  }

  Corepack is about to download https://registry.npmjs.org/pnpm/-/pnpm-8.15.4.tgz.
  
  Do you want to continue? [Y/n]

  To avoid this issue, modify (1) Buildkite pipelines to cache on the packageManager property in package.json, and (2) Dockerfiles to mount package.json and run corepack install:

  - seek-oss/docker-ecr-cache#v2.1.0:
  + seek-oss/docker-ecr-cache#v2.2.0:
      cache-on:
       - .npmrc
  +    - package.json#.packageManager
       - pnpm-lock.yaml

  FROM --platform=arm64 node:20-alpine
  
  - RUN corepack enable pnpm
  + RUN --mount=type=bind,source=package.json,target=package.json \
  + corepack enable pnpm && corepack install

• template/*-rest-api: Fix lint failure (#1514)

  This resolves the following failure on a newly-initialised project due to a regression in the @types/express dependency chain:

  error TS2688: Cannot find type definition file for 'mime'.
    The file is in the program because:
      Entry point for implicit type library 'mime'

  A temporary workaround is to install mime as a dev dependency.

• deps: @octokit/types ^13.0.0 (#1536)

• template/lambda-sqs-worker-cdk: Align dead letter queue naming with Serverless template (#1542)

• Jest.mergePreset: Fudge Bundler module resolution (#1513)

  This extends #1481 to work around a ts-jest issue where test cases fail to run.

• template/oss-npm-package: Set timeout to 20 minutes for GitHub Actions (#1501)

• template/lambda-sqs-worker-cdk: Replace CDK context based config with TypeScript config (#1541)

skuba@8.0.0

This version of skuba looks more scary than it is. The major change is that our dependencies have bumped their minimum Node.js requirement from 18.12 to 18.18. Most SEEK projects do not pin minor Node.js versions and are unlikely to be affected by this change.

In the spirit of upgrades, we recently refreshed our ARM64 migration guide and also have one for pnpm. A previous release landed a skuba migrate command to simplify upgrades to Node.js 20 (active LTS) before Node.js 18 reaches EOL in April 2025.

Major Changes

• deps: eslint-config-seek 13 + eslint-config-skuba 4 + typescript-eslint ^7.2.0 (#1487)

  These major upgrades bump our minimum requirement from Node.js 18.12 to 18.18.

  See the typescript-eslint v7 announcement for more information, and consider upgrading your project to the active LTS release with skuba migrate before Node.js 18 reaches EOL in April 2025.

Minor Changes

• deps: semantic-release 22 (#1492)

• deps: TypeScript 5.4 (#1491)

  This major release includes breaking changes. See the TypeScript 5.4 announcement for more information.

Patch Changes

• template: Remove BUILDPLATFORM from Dockerfiles (#1350)

  Previously, the built-in templates made use of BUILDPLATFORM and a fallback value:

  FROM --platform=${BUILDPLATFORM:-arm64} gcr.io/distroless/nodejs20-debian11

  1. Choose the platform of the host machine running the Docker build. An AWS Graviton Buildkite agent or Apple Silicon laptop will build under arm64, while an Intel laptop will build under amd64.
  2. Fall back to arm64 if the build platform is not available. This maintains compatibility with toolchains like Gantry that lack support for the BUILDPLATFORM argument.

  This approach allowed you to quickly build images and run containers in a local environment without emulation. For example, you could docker build an arm64 image on an Apple Silicon laptop for local troubleshooting, while your CI/CD solution employed amd64 hardware across its build and runtime environments. The catch is that your local arm64 image may exhibit different behaviour, and is unsuitable for use in your amd64 runtime environment without cross-compilation.

  The built-in templates now hardcode --platform as we have largely converged on arm64 across local, build and runtime environments:

  FROM --platform=arm64 gcr.io/distroless/nodejs20-debian11

  This approach is more explicit and predictable, reducing surprises when working across different environments and toolchains. Building an image on a different platform will be slower and rely on emulation.

• Jest.mergePreset: Fudge Node16 and NodeNext module resolutions (#1481)

  This works around a ts-jest issue where test cases fail to run if your moduleResolution is set to a modern mode:

  {
    "compilerOptions": {
      "moduleResolution": "Node16 | NodeNext"
    }
  }

  error TS5110: Option 'module' must be set to 'Node16' when option 'moduleResolution' is set to 'Node16'.
  error TS5110: Option 'module' must be set to 'NodeNext' when option 'moduleResolution' is set to 'NodeNext'.

• pkg: Exclude jest/*.test.ts files (#1481)

• template: Remove account-level tags from resources (#1494)

  This partially reverts #1459 and #1461 to avoid unnecessary duplication of account-level tags in our templates.