Replies: 52 comments 513 replies
-
|
Depending on how different your mouse is, you might also have to record a USB session while you change settings in Armoury Crate. This logs all messages that get sent to your device via USB and helps me to understand how armoury Crat changes the settings. It seems the protocol of the various mice are not too different. But they have a few variations here and there which are important for it to function. |
Beta Was this translation helpful? Give feedback.
-
|
:D forgiven. |
Beta Was this translation helpful? Give feedback.
-
|
@seerge Might it be possible to clean up this thread a bit? Like all mice that are already implemented. The reason is that Github seems to really struggle with such long posts that it became a real pain to find posts here and answer to the right one. Oh and yeah. I still lack hardware access to implement keyboards, headphones, controllers and whatever else ASUS sells with RGB. Like.. anything except mice and the Ally. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG given amount of requests, I think it will be a bit easier just to do them as Issues instead :) I have added a new issue template with all info https://github.com/seerge/g-helper/issues/new?assignees=&labels=&projects=&template=peripherals_request.yml And updated header message. Let me know if you have suggestions :) And thanks as usual |
Beta Was this translation helpful? Give feedback.
-
|
@seerge Yeah, that would be even better. We just have to keep track here or somewhere else, which mouse is already supported. I hope I can one day get my hand on other peripherals to support them... People seem to request controllers, headsets and especially keyboards a lot. |
Beta Was this translation helpful? Give feedback.
-
|
I have updated list of supported devices here and on main readme :) (unless I missed something) |
Beta Was this translation helpful? Give feedback.
-
|
ROG Keris Wireless
|
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG is it possible to refresh the mouse tab every time physically change DPI mode so that it displays current DPI mode correctly? eg: to change DPI value to 500,1000,1500,2000 , change DPI 1 to 500 , then physically change to DPI 2 then close the mouse tab and reopen the mouse tab to be able to change value for DPI 2 since mouse page don't refresh after clicking physical DPI button. |
Beta Was this translation helpful? Give feedback.
-
|
No you do not have to do that. You can still click the DPI button and change the DPI for the other settings. You do not have to click the Synchronize mouse button at all. This is more of a "fix" if the mouse does not read correctly. I added a change that you can still cycle through the DPIs in GHelper. They will not change the active profile on the mouse but you can change the different DPIs without having to do some weird dance. |
Beta Was this translation helpful? Give feedback.
-
|
Yea ,this is much more easy and convenient. Thank you. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. I pushed this to GHelper. Will be included in the next release. |
Beta Was this translation helpful? Give feedback.
-
|
I have uploaded updated version over https://github.com/seerge/g-helper/releases/tag/v0.103 |
Beta Was this translation helpful? Give feedback.
-
|
I took a stab at packet sniffing, see section 4 below. 1. MODEL/ VERSIONTUF M4 Wireless 2. SCREENSHOTSHere is a summary of the settings with some additional information that might not be clear from the screenshots, for quick reference:
3. USB TREE VIEW VALUES4. SAMPLE PACKET INFORMATIONI figured I'd take a stab at using the free usb analyzer. I picked a setting that just toggles on and off to keep things simple for myself and checked packets for a single bit flip. If I've got this right, maybe I could save you some busy work and tackle the rest. These are the packets I see getting sent when toggling angle snapping on: When turning angle snapping off, it flips the 01 in column 5 to 00. Each of these is the first of 7 packets that gets sent, but all subsequent packets are identical regardless of whether I'm turning angle snapping on or off. Here are the other 6 for reference: Everything comes through on pipe handle: 0xd7d10c10 (Endpoint Address: 0x4) This is what's sent when directly changing settings; i.e. I haven't looked at what happens when syncing or saving to the mouse's onboard memory. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. Yes. It decoded battery, energy settings and profiles/dpi profle (I hope they're at least correct). It choked on the DPI levels. Try this build here. |
Beta Was this translation helpful? Give feedback.
-
|
I've got it showing under peripherals now. It's reporting all my settings accurately; I've also gone through each control and they all seem to work. I've attached the log generated during my messing around. I can also confirm that closing and re-opening the window for mouse control will allow me to see the current DPI setting without manually synchronizing. I see a couple references in the logs to the wrong PID, but it's not causing any problems. log.txt](https://github.com/seerge/g-helper/files/12208246/log.txt) |
Beta Was this translation helpful? Give feedback.
-
|
This looks good. So from the log it seems like your mouse can indeed switch the DPI profiles via software. Armoury just locked that away. The moues confirms the DPI switch and does not error out (unlike the ROG Keris, which does error out). What wrong PIDs do you mean? There are other things in GHelper that work with HID devices, like the keyboard AURA, AnimeMatrix and other stuff. Maybe the logs are from that. |
Beta Was this translation helpful? Give feedback.
-
|
You're completely right sorry - the PID I saw is for the keyboard. This is amazing work Ice - thank you so much for your time and effort (and speed)! |
Beta Was this translation helpful? Give feedback.
-
|
You’re welcome. :) Keep in mind that Armoury Crate will always overwrite all mouse profile when you connect the mouse to a PC with AC running. Ghelper does not store the profiles on your PC but only on the mouse. It edits the onboard profiles directly. |
Beta Was this translation helpful? Give feedback.
-
|
hey hows it going man thats very fantastic of you to be able to add mouse settings in this great app and free us from that armoury crate i have ROG STRIX GLADIUS III WIRELESS but i cant even go in armoury crate to send the things u mention but would be so happy to see it in g-helper thx a lot again i have a G533ZX laptop. |
Beta Was this translation helpful? Give feedback.
-
|
Looks good. Have you also tried to change settings? Does it work? |
Beta Was this translation helpful? Give feedback.
-
|
yeh it does no problem its just when u change dpi with the button thats on the mouse i should close the mouse settings to see if it changed or not but it does its just some visual think and i dont care about some closing and opening again everything else works fine thx |
Beta Was this translation helpful? Give feedback.
-
|
You can also hit "synchronize mouse" to re-read the mouse. You don't have to close the window. Yeah. The moue does not re-read the active profile all the time. |
Beta Was this translation helpful? Give feedback.
-
|
oh yeh that works too anyway thank you so much man u were a big help 👍👍 |
Beta Was this translation helpful? Give feedback.
-
|
You're welcome. I pushed the new mouse profile to the main repository. Will be included in the a release, soon. |
Beta Was this translation helpful? Give feedback.
-
|
ROG STRIX IMPACT II WIRELESS |
Beta Was this translation helpful? Give feedback.
-
Ah yes. The 103 build is from 2 days ago. @seerge maybe you should adjust the description because the Impact II wireless is not supported in that release. |
Beta Was this translation helpful? Give feedback.
-
|
It only includes those: |
Beta Was this translation helpful? Give feedback.
-
|
log.txt |
Beta Was this translation helpful? Give feedback.
-
|
Yeah it is not detected. And I wrote the reason above. The latest public release does not include the mouse yet. You have to use my custom build that I sent you or wait for the release with the latest mouse related changes. |
Beta Was this translation helpful? Give feedback.
-
|
Oh, it is my problem. I misread the introduction. Sorry to bother. |
Beta Was this translation helpful? Give feedback.
-
|
TUF GAMING M3 |
Beta Was this translation helpful? Give feedback.
-
|
Only Reactive is not working, the rest are still working normally |
Beta Was this translation helpful? Give feedback.
-
|
And when I choose Reactive in Armory and sync to Ghelper, it shows like this! |
Beta Was this translation helpful? Give feedback.
-
|
Ok. Apparently your mouse maps Reactive to what other mice use for Rainbow. I remapped that for the TUF M3. Please try this build. |
Beta Was this translation helpful? Give feedback.
-
|
Works fine, no more errors! |
Beta Was this translation helpful? Give feedback.
-
|
Alright. Good to hear. I will submit it. |
Beta Was this translation helpful? Give feedback.
-
|
@seerge As we add more peripherals there will be the point that people want to use GHelper on a non-ASUS laptop just for their peripherals, so they do not have to touch armoury crate. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG lets not rush with this :) i will check what options can still work on non-asus devices |
Beta Was this translation helpful? Give feedback.
-
|
Nah. I didn't intend to rush. Just something to keep in mind as Armoury Crate is hated not only by laptop users :D |
Beta Was this translation helpful? Give feedback.
-
|
Oh yeah thank you very much. I'm in this case, I have a ROG motherboard and a ROG mouse and I would love to use this software instead of AC <3 |
Beta Was this translation helpful? Give feedback.
-
|
asus rog harpe aim lab edition.zip |
Beta Was this translation helpful? Give feedback.
-
|
Alright. My Harpe just arrived. Lets see whether I can make it work or not. I hope ASUS isn't doing some special driver trickery here. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. That should do it. Please try this build with the Omni Receiver. |
Beta Was this translation helpful? Give feedback.
-
|
And ... holy fu**... is that mouse made out of paper? That thing weights nothing. My chakram feels like a giant brick compared to that. |
Beta Was this translation helpful? Give feedback.
-
|
Haha, I know, feels like I'm holding nothing at all, I love it. Also, I just tested the build you put in the other post and it works perfectly. You are a legend. Thanks again! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. Alright, I'm going to push that to the main repo ... and send the mouse back lmao. |
Beta Was this translation helpful? Give feedback.
-
|
Really love the app from @seerge !! Would love to have my mouse integrated inside g-helper! Here are the info. If anything else needed, please tell me. Rog Strix Carry: 
|
Beta Was this translation helpful? Give feedback.
-
|
That is good. I have the carry almost integrated as someone else requested it back when we started with the mouse integration. Please try this build and send me the GHelper log file afterwads. |
Beta Was this translation helpful? Give feedback.
-
|
Hey thanks for the build!!! Sorry I was on vacation. Here is the log file. I can't see anything on the menu but I think you already know that. |
Beta Was this translation helpful? Give feedback.
-
|
Alright, no problem. |
Beta Was this translation helpful? Give feedback.
-
|
Alright I am on this: here is the log file right now: |
Beta Was this translation helpful? Give feedback.
-
|
Haha, too many numbers and letters, probably.. Everything works like a charm now!!! Thank you, once again, for everything! |
Beta Was this translation helpful? Give feedback.
-
|
yes it was always at lowest |
Beta Was this translation helpful? Give feedback.
-
|
Yeah... A lot of binary data. So just to make sure the profile is complete. Could you please test every function in GHelper for this mouse and see whether it works as it should? If it does, I will push the profile to the main repo so it will be included in the next update. |
Beta Was this translation helpful? Give feedback.
-
|
Everything works great, even the battery % when changing batteries. Only for the lift off distance, even though the tick stays selected it doesn't change any behaviour. But I don't think this is your fault. In the armoury crate, as you can see in the original screenshots, it is not available to change. I believe you can push it! Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Yeah. Some mice have endpoints they respond to and store the value, but it does nothing. Maybe it was intended to support it and got scrapped during development. I guess I will remove the Lift-Off distance from the mouse as it seemingly does nothing. Although, the difference is not that large either way. Even on my Chakram, which has the setting, I could barely tell which one is active. Thanks for testing and the usb capture. Will push the mouse profile then. |
Beta Was this translation helpful? Give feedback.
-
Model:ROG Gladius II (P/N: 90MP00R0-B0UA00) AC Settings:Click here to see images
USBDTV: |
Beta Was this translation helpful? Give feedback.
-
|
Oh, I see. So, I'll wait until then. |
Beta Was this translation helpful? Give feedback.
-
|
I'm just afraid it will open pandora-box with lots of people installing it on non asus laptops and starting to complain that none of the function in the app does't work (obviously), as they all depend on ASUS ACPI driver |
Beta Was this translation helpful? Give feedback.
-
What about a warning dialog? The same with the ASUS ACPI where the user can acknowledge that is not a supported device and features are limited or quit the app. |
Beta Was this translation helpful? Give feedback.
-
|
@IceStormNG @seerge Any updates about this topic? (Support without asus laptop) |
Beta Was this translation helpful? Give feedback.
-
|
Replying here since we have the same mice, I also have a ROG Gladius II w/ model P502, have the same screenshots also in AC. Tried @IceStormNG's build of GHelper, only clicking the image below will only give an exception. Log and USB Device Tree Viewer output is also provided below for my case in case there are any differences in usbdtv.
|
Beta Was this translation helpful? Give feedback.
-
Model:
Harpe ACE Aim Lab Edition is a 2.4G wireless mouse, and ROG now update it's usb receover to support a new function that you can use two different supported device by just one receiver. And now the receiver changed it's name to OMNI Receiver, So maybe there are some differents between other mouse. I think their is no need to implement all the function, power indication and performance edit are enough. Azoth is a keyboard with an OLED panel and a control knob. To implement all the function in the armoury create are too difficult I think, so maybe you can just finish the power indication, that's the most useful function. |
Beta Was this translation helpful? Give feedback.
-
|
Hm. Interesting. Then I have to wait for the other user to send me the packet logs to find out how AC connects to that mouse. |
Beta Was this translation helpful? Give feedback.
-
|
@szy854136968 you might want to test this build. I ordered a Harpe Ace for testing purpose and got it working through the receiver. You might want to confirm that it also works for you. |
Beta Was this translation helpful? Give feedback.
-
|
OK，I will test this build later today |
Beta Was this translation helpful? Give feedback.
-
|
I have test this build on my computer and it works perfectly. You are really a legend, thanks for all your efforts! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks. I pushed it to the repository and will be included with the next release. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks a lot for your contribution! Here's my request: Model: ROG Keris Wireless Aimpoint Armoury Screenshots
USB Device Tree Log
|
Beta Was this translation helpful? Give feedback.
-
|
Yes, the settings do match and work well at the 2.4Ghz mode. But it seems that the build you provided cannot identify the wired mouse properly. |
Beta Was this translation helpful? Give feedback.
-
|
For the sake of your convenience, I re-collected the USB Device Tree log using wired mode: Log
|
Beta Was this translation helpful? Give feedback.
-
|
Oh... looks like I had a typo in there. Please Try this build: |
Beta Was this translation helpful? Give feedback.
-
|
Great, it works! Thank you for your patience and response! |
Beta Was this translation helpful? Give feedback.
-
|
Maybe at some point. The BT protocol works differently afaik and is limited on some mice compared to the Dongle or wired connection. I might add it at some point but right now, some mice are already challenging enough on its own. |
Beta Was this translation helpful? Give feedback.
-
|
hey man thx for ur all hard works we can use our products as it should be without problem hm sorry but had a question is it possible to see a mouse updates in g-helper in the future would be glad to see but i think it would not be so easy like laptop updates because of the restrictions Asus has but would be glad to see it thx again keep up the good work 👍❤️ |
Beta Was this translation helpful? Give feedback.
-
|
Do you mean firmware updates for the mouse? If so, I prefer to not touch that topic. I actually have a packet capture on how this works, but I prefer not to do that as it is too easy to brick the mouse. Firmware updates for the mouse are also not required if it works and they're rather rare. Otherwise, install AC on a spare PC to run the upgrade (it doesn't seem to work inside a VM, tried that already). Or do you mean something else with "updates"? |
Beta Was this translation helpful? Give feedback.
-
|
Oh I see thx anyway if that's the problem it's best not to add then 😉
…On Wed, 23 Aug 2023, 23:51 IceStormNG, ***@***.***> wrote:
Do you mean firmware updates for the mouse? If so, I prefer to not touch
that topic. I actually have a packet capture on how this works, but I
prefer not to do that as it is too easy to brick the mouse. Firmware
updates for the mouse are also not required if it works and they're rather
rare. Otherwise, install AC on a spare PC to run the upgrade (it doesn't
seem to work inside a VM, tried that already).
Or do you mean something else with "updates"?
—
Reply to this email directly, view it on GitHub
<#900 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BBTEAAVNUY4XZW6T5UZX6T3XWZQ37ANCNFSM6AAAAAA2YPPDRA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Haha, I see. Can leave it in for placebo indeed xD
Have a nice one! Can I support you somewhere?
Στις Κυρ 14 Ιαν 2024 στις 8:17 μ.μ., ο/η IceStormNG <
***@***.***> έγραψε:
… Yeah. Some mice have endpoints they respond to and store the value, but it
does nothing. Maybe it was intended to support it and got scrapped during
development. I guess I will remove the Lift-Off distance from the mouse as
it seemingly does nothing. Although, the difference is not that large
either way. Even on my Chakram, which has the setting, I could barely tell
which one is active.
So I might also just leave it in. Even if potentially it is just a placebo
setting.
Thanks for testing and the usb capture. Will push the mouse profile then.
—
Reply to this email directly, view it on GitHub
<#900 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AMBE75TS56QNPQ4E6VPSJ2DYOQVOHAVCNFSM6AAAAAA2YPPDRCVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DCMRVG4ZTM>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Thanks, you too. Well, not really. I just started to do that for myself and here and there because I'm bored and to give ASUS a run for their garbage software. It's kinda interesting to reverse engineer it, even though it is a little tricky without the mouse at hand |
Beta Was this translation helpful? Give feedback.
-
|
I have a question? Will there be more peripherals added like the Rog Raikiri Pro controller, ASUS ROG Strix Go BT Gaming Headset? |
Beta Was this translation helpful? Give feedback.
-
|
Maybe. The main problem is, that every type of peripheral (kb, mouse, headset) has a protocol that is different than the other types. But the devices of the same type are usually pretty similar. Once I get one of those into my hands, I will gladly add support for these devices. |
Beta Was this translation helpful? Give feedback.
-
|
Big Thanks for the really nice software i like it any support for Asus Raikiri Pro Controller here are the images in armoury crate controller settings and then if you get this to work then i can uninstaller armoury crate for good |
Beta Was this translation helpful? Give feedback.
-
|
Great, Progress.... Now I just need to find out what IOCTL commands to send so it sends what I want instead of assuming I want to trigger the rumble. |
Beta Was this translation helpful? Give feedback.
-
|
Oh, wow! This is great progress and makes sense I had to use the XOutput with ViGEnBus driver for it to show up on rewasd and then use rewasd software to program the device. It only shows up as an Xbox 360 controller and can't use the Xbox one features or back pads. I will try installing this app and see if it unlocks any other possibilities for me. I really appreciate the updates! |
Beta Was this translation helpful? Give feedback.
-
|
Bad news... very bad news. So, I could get this to work on any OS that is not Windows, but Windows has the Xboxgip filter driver in place that makes sure only certain apps can connect to the \.\XboxGip and \.\XboxGip_Admin. I can connect to the regular XboxGip and send data, they're never forwarded to the Controller though. The necessary IOCTLs that I have to do are also "Access_Denied". Both the Xbox Accessories app and also AC use the same way to communicate with the controller, through this locked API. Another solution could be the GDK, which is under NDA and also for registered Game developers. We would need a custom class, the GipGameControllerProvider class, which I can access and use, cannot send custom commands. Only the regular ones which are standard XboxOne compatible. All commands by AC are 0x21 ID, which is extended command, and is disallowed by the GipGameControllerProvider. The class is also sealed, which means we cannot extend it. So, I know exactly what to send, and where. I can connect. But I'm not allowed to send this because Microsoft doesn't want me to, and ASUS didn't implement a regular HID for this, but uses an extension of the WinRT Gaming Input, which is fine for them, as they're registered Xbox Accessoires developers, but a problem for us, as we cannot send the data. Funnily, I could get it to work on Linux, where I can just raw send USB data to the device without filter driver in place. Oh. and we cannot remove the driver, because the controller would not work anymore then. |
Beta Was this translation helpful? Give feedback.
-
|
@LvLOn3 as you kindly donated the game pad for implementing it, which seems to be impossible for us due to ASUS chosing the most locked down way, do you want that money back? The whole access is locked down, and until MS stops acting like Apple and controlling everything, you have to use AC to configure the controller (even if just in a VM). As much as I don't want to give up, the only solution is a custom filter driver, which is another can of worms (due to signing, secureboot, anti-cheat). Therefore, until something changes here, or someone finds a way to bypass the permission checks, the Raikiri cannot work in GHelper. I'm very sorry for that. |
Beta Was this translation helpful? Give feedback.
-
|
no no no keep it, it was a donation. Thank you for all your hard work. I understand. =) |
Beta Was this translation helpful? Give feedback.
-
|
added my mouse and keyboard. thx Wonderful program. thank you for your contribution. once more peripherals are added there's no need for armory crate at all... what crappy support and flawed programs they make...how did you decide to make this? |
Beta Was this translation helpful? Give feedback.
-
|
Keyboard support might come at a later point. Please test this build and let me know whether the mouse works. If something does not work, please also send me the GHelper log file. |
Beta Was this translation helpful? Give feedback.
-
|
May I ask support to the following peripherials?
Here are the device dumps: Asus Strix Flare ( first version ) - keyboard: Connection Status : 0x01 (Device is connected) Vendor ID : 0x0B05 (ASUSTek Computer Inc.) Device Description : USB composit device HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0B0518750038 Connection Index : 0x02 (Port 2) Connection Index : 0x02 (2) bLength : 0x12 (18 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) Error : ERROR_GEN_FAILURE (because the device is Full-Speed only) bLength : 0x04 (4 bytes) Asus ROG Delta S Wireless - headphone: Connection Status : 0x01 (Device is connected) Vendor ID : 0x0B05 (ASUSTek Computer Inc.) Device Description : USB composit device HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0B051A310100 Connection Index : 0x05 (Port 5) Connection Index : 0x05 (5) bLength : 0x12 (18 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x0A (10 bytes) bLength : 0x0C (12 bytes) bLength : 0x0A (10 bytes) bLength : 0x09 (9 bytes) bLength : 0x0C (12 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x0B (11 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x0B (11 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x09 (9 bytes) bLength : 0x09 (9 bytes) bLength : 0x07 (7 bytes) bLength : 0x07 (7 bytes) bLength : 0x04 (4 bytes) |
Beta Was this translation helpful? Give feedback.
-
|
Hey @seerge! |
Beta Was this translation helpful? Give feedback.
-
|
ROG STRIX IMPACT III
|
Beta Was this translation helpful? Give feedback.
-
Ok. Then I will change that.
AC will not read the settings from the mouse. So if you change anything in Ghelper, AC will just overwrite it with the settings it has stored. You can test however when you change a setting in AC, then open GHelper and click on the synchronize button, whether GHelper shows the new settings that AC configured. |
Beta Was this translation helpful? Give feedback.
-
|
Ok. I did the test. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. I pushed the changes. The next update of GHelper will include it. |
Beta Was this translation helpful? Give feedback.
-
|
The new version 0.151 of GH does not recognize the mouse. |
Beta Was this translation helpful? Give feedback.
-
|
@reportonly 0.151 is out for a few days already :) your mouse will be in the next one |
Beta Was this translation helpful? Give feedback.
-
|
I do have another request would it be possible to get the rog centra true wireless earbuds to work on Ghelper? |
Beta Was this translation helpful? Give feedback.
-
|
For GHelper I mainly do peripherals as they get requested (and as I can get access to hardware, which is the main issue as ASUS hardware is quite pricey. And I just ordered a 160€ controller and 100€ earphones and send them back pretty much immediately. Amazon isn't gonna like that). There is one bug with the AniMeMatrix Audio Visualization that I want to fix at some point (if this even possible as MS also makes this as hard as possible). Otherwise, there is not much to add to GHelper for me. It usually just works. |
Beta Was this translation helpful? Give feedback.
-
|
I understand that it would defeat the purpose of being Lightweight. One thing i can say that Ghelper did help me with is that I have a flow z13 and a xg mobile 3080 and when using Armory Crate It thermal Throttles but when i use Ghelper it doesnt which makes me think they are trying to harm older devices thought updates so that you have to upgrade to the new stuff. I reported it to them and no fix. |
Beta Was this translation helpful? Give feedback.
-
|
What they do is to throttle using dynamic tuning with higher prio for the GPU. This can cause the CPU to throttle without good reason. My M16 also does that with AC. The CPU gets capped to 30W even in Turbo mode so the GPU can go full power. In most games which are high GPU load, this usually tends to work, but in CPU demanding games, it causes weird crap. And also loading stutters. |
Beta Was this translation helpful? Give feedback.
-
|
I don't think there is anything in the world that can keep intel stuff cool. This ally 2 coming out with this (rumored) Intel ultra 155 not only going to fry sd cards but also cook steaks on it 😂 |
Beta Was this translation helpful? Give feedback.
-
|
MSI releases an ally clone with Intel Meteor Lake. Sadly, AMD is too slow and has a big problem of not producing enough chips for all the OEMs. So they use Intel instead even if it is worse. |
Beta Was this translation helpful? Give feedback.
-
|
I have one last request lol what about the ROG Strix Scope RX Keyboard? that is my last peripheral from Asus. |
Beta Was this translation helpful? Give feedback.
-
|
Well, I have 0 keyboard support right now... because I have no ASUS keyboard at hand. And I'm not sure when Amazon will ban me for regularly sending stuff back 😄 |
Beta Was this translation helpful? Give feedback.
-
|
True true I would wait a few months. I have always wondered that also.. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @IceStormNG First, I don't know if this is the same for all supported devices. When charging, the Gladius III wireless writes 4 lines/minute to the log file. Perhaps writing at the start charging and at the end charging would be sufficient ? :) |
Beta Was this translation helpful? Give feedback.
-
|
It polls the battery state every few seconds when GHelper is in foreground. This is done for all peripherals. |
Beta Was this translation helpful? Give feedback.
-
|
Oh ok. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, there may be a bug with my GLADIUS III wireless aimpiont. When I connect it wirelessly, Ghelper shows "Wired", but when I connect it wired, Ghelper shows "Wireless". |
Beta Was this translation helpful? Give feedback.
-
|
Please try this build and let me know whether it works correctly now. |
Beta Was this translation helpful? Give feedback.
-
|
Yes, it works correct now. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, It's curious. My Gladius III correctly displays "Wired" when connected with the USB cable. |
Beta Was this translation helpful? Give feedback.
-
|
@Kikimahe is yours regular Gladius III or the Gladius III aimpoint? They're different mice. |
Beta Was this translation helpful? Give feedback.
-
|
Ah yes... I have a regular Gladius III... |
Beta Was this translation helpful? Give feedback.
-
|
I have an ASUS ROG Gladius III mouse, but it does not appear in the program. :( What could be the problem? (Excuse the Hungarian language.)
|
Beta Was this translation helpful? Give feedback.
-
|
Please try this build and see whether all the settings work as they should. |
Beta Was this translation helpful? Give feedback.
-
|
It already appears, but it says "Not connected" and when I click on it, nothing happens. 😕
|
Beta Was this translation helpful? Give feedback.
-
|
Hm. Oh. I guess I found the reason why. This should do it: |
Beta Was this translation helpful? Give feedback.
-
|
Ahhhhh, it works perfectly!!! 👍 Thank you! 🥰
|
Beta Was this translation helpful? Give feedback.
-
|
Alright. I will push this to master then an upcoming update of GHelper will include the mouse profile for this one. |
Beta Was this translation helpful? Give feedback.
-
|
I noticed that Armoury Crate Gear can recognize my ROG Harpe Ace Aim Lab Edition mouse and edit its settings through Bluetooth connection. Can Ghelper do that? |
Beta Was this translation helpful? Give feedback.
-
|
There is no BT support yet, as I haven't put any research into that yet, and likely won't in the near future. The Problem with BT is that most mice are very limited in that mode, either by polling rate or by the features they support. |
Beta Was this translation helpful? Give feedback.
-
ASUS P519
=========================== USB Port1 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 2-2-1
Properties : 0x01
IsUserConnectable : yes
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no
ConnectionIndex : 0x01 (Port 1)
CompanionIndex : 0
CompanionHubSymLnk : USB#VID_05E3&PID_0626#6&4420b4e&0&7#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
CompanionPortNumber : 0x01 (Port 1)
-> CompanionPortChain : 2-7-1
========================== Summary =========================
Vendor ID : 0x0B05 (ASUSTek Computer Inc.)
Product ID : 0x1AF3
USB Version : 2.0 -> but Device is Full-Speed only
Port maximum Speed : High-Speed (Companion Port 2-7-1 is doing the SuperSpeed)
Device maximum Speed : Full-Speed
Device Connection Speed : Full-Speed
Self powered : yes
Demanded Current : 500 mA
Used Endpoints : 5
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB Composite Device
Device Path : \\?\USB#VID_0B05&PID_1AF3#RBMPMV027056hY#{a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Kernel Name : \Device\USBPDO-9
Device ID : USB\VID_0B05&PID_1AF3\RBMPMV027056HY
Hardware IDs : USB\VID_0B05&PID_1AF3&REV_0113 USB\VID_0B05&PID_1AF3
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0014 (GUID_DEVCLASS_USB)
Driver : \SystemRoot\System32\drivers\usbccgp.sys (Version: 10.0.26100.560 Date: 2024-06-26 Company: Microsoft Corporation)
Driver Inf : C:\WINDOWS\inf\usb.inf
Legacy BusType : PNPBus
Class : USB
Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
Service : usbccgp
Enumerator : USB
Location Info : Port_#0001.Hub_#0006
Address : 1
Location IDs : PCIROOT(0)#PCI(0801)#PCI(0003)#USBROOT(0)#USB(2)#USB(1), ACPI(_SB_)#ACPI(PCI0)#ACPI(GP17)#ACPI(XHC0)#ACPI(RHUB)#ACPI(PRT2)#USB(1)
Container ID : {2e213757-94e7-550b-8be6-45cf2d413bc3}
Manufacturer Info : (标准 USB 主控制器)
Capabilities : 0x94 (Removable, UniqueID, SurpriseRemovalOK)
Status : 0x0180400A (DN_DRIVER_LOADED, DN_STARTED, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
Address : 1
EnhancedPowerMgmtEnabled : 0
Power State : D0 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
+++++++++++++++++ Registry USB Flags +++++++++++++++++
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0B051AF30113
osvc : REG_BINARY 00 00
NewInterfaceUsage : REG_DWORD 00000000 (0)
---------------- Connection Information ---------------
Connection Index : 0x01 (Port 1)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01 (Configuration 1)
Device Address : 0x06 (6)
Is Hub : 0x00 (no)
Device Bus Speed : 0x01 (Full-Speed)
Number of open Pipes : 0x04 (4 pipes to data endpoints)
Pipe[0] : EndpointID=1 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[1] : EndpointID=1 Direction=OUT ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[2] : EndpointID=2 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[3] : EndpointID=3 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Data (HexDump) : 01 00 00 00 12 01 00 02 00 00 00 40 05 0B F3 1A ...........@....
13 01 01 02 03 01 01 01 00 06 00 04 00 00 00 01 ................
00 00 00 07 05 81 03 40 00 01 00 00 00 00 07 05 .......@........
01 03 40 00 01 00 00 00 00 07 05 82 03 40 00 01 ..@..........@..
00 00 00 00 07 05 83 03 40 00 01 00 00 00 00 ........@......
--------------- Connection Information V2 -------------
Connection Index : 0x01 (1)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes, port supports USB 1.1)
Usb200 : 1 (yes, port supports USB 2.0)
Usb300 : 0 (no, port not supports USB 3.0) -> but Companion Port 2-7-1 does
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Device is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Device is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Device is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Device is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00
Data (HexDump) : 01 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.0) -> but device is Full-Speed only
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0x0B05 (ASUSTek Computer Inc.)
idProduct : 0x1AF3
bcdDevice : 0x0113
iManufacturer : 0x01 (String Descriptor 1)
Language 0x0409 : "ASUSTeK"
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
iSerialNumber : 0x03 (String Descriptor 3)
Language 0x0409 : "RBMPMV027056hY"
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 40 05 0B F3 1A 13 01 01 02 .......@........
03 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x005B (91 bytes)
bNumInterfaces : 0x03 (3 Interfaces)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x04 (String Descriptor 4)
Language 0x0409 : "Default configuration"
bmAttributes : 0xE0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x01 (yes)
D5: Remote Wakeup : 0x01 (yes)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0xFA (500 mA)
Data (HexDump) : 09 02 5B 00 03 01 04 E0 FA 09 04 00 00 02 03 00 ..[.............
00 00 09 21 11 01 00 01 22 22 00 07 05 81 03 40 ...!...."".....@
00 01 07 05 01 03 40 00 01 09 04 01 00 01 03 01 ......@.........
02 00 09 21 11 01 00 01 22 52 00 07 05 82 03 40 ...!...."R.....@
00 01 09 04 02 00 01 03 00 00 00 09 21 11 01 00 ............!...
01 22 88 00 07 05 83 03 40 00 01 ."......@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00 (Interface 0)
bAlternateSetting : 0x00
bNumEndpoints : 0x02 (2 Endpoints)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 02 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 22 00 .!...."".
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0022 (34 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 81 03 40 00 01 ....@..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x01 (Direction=OUT EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 01 03 40 00 01 ....@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x01 (Interface 1)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x01 (Boot Interface)
bInterfaceProtocol : 0x02 (Mouse)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 01 00 01 03 01 02 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 52 00 .!...."R.
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0052 (82 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x82 (Direction=IN EndpointID=2)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 82 03 40 00 01 ....@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x02 (Interface 2)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 02 00 01 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 88 00 .!...."..
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0088 (136 bytes)
Error reading descriptor : ERROR_GEN_FAILURE (due to a obscure limitation of the Win32 USB API, see F1 Help)
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x83 (Direction=IN EndpointID=3)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 83 03 40 00 01 ....@..
----------------- Device Qualifier Descriptor -----------------
Error : ERROR_GEN_FAILURE (because the device is Full-Speed only)
-------------------- String Descriptors -------------------
------ String Descriptor 0 ------
bLength : 0x04 (4 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language ID[0] : 0x0409 (English - United States)
Data (HexDump) : 04 03 09 04 ....
------ String Descriptor 1 ------
bLength : 0x10 (16 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUSTeK"
Data (HexDump) : 10 03 41 00 53 00 55 00 53 00 54 00 65 00 4B 00 ..A.S.U.S.T.e.K.
------ String Descriptor 2 ------
bLength : 0x34 (52 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
Data (HexDump) : 34 03 41 00 53 00 55 00 53 00 20 00 54 00 58 00 4.A.S.U.S. .T.X.
20 00 47 00 41 00 4D 00 49 00 4E 00 47 00 20 00 .G.A.M.I.N.G. .
4D 00 4F 00 55 00 53 00 45 00 20 00 4D 00 49 00 M.O.U.S.E. .M.I.
4E 00 49 00 N.I.
------ String Descriptor 3 ------
bLength : 0x1E (30 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "RBMPMV027056hY"
Data (HexDump) : 1E 03 52 00 42 00 4D 00 50 00 4D 00 56 00 30 00 ..R.B.M.P.M.V.0.
32 00 37 00 30 00 35 00 36 00 68 00 59 00 2.7.0.5.6.h.Y.
------ String Descriptor 4 ------
bLength : 0x2C (44 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "Default configuration"
Data (HexDump) : 2C 03 44 00 65 00 66 00 61 00 75 00 6C 00 74 00 ,.D.e.f.a.u.l.t.
20 00 63 00 6F 00 6E 00 66 00 69 00 67 00 75 00 .c.o.n.f.i.g.u.
72 00 61 00 74 00 69 00 6F 00 6E 00 r.a.t.i.o.n.
|
Beta Was this translation helpful? Give feedback.
-
|
Please try this build and send me the log file again. ASUS did something really weird on this one. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your work,It works well, but I have to point out one issue - it works in wired mode, but the g-helper displays "(Wireless)". =========================== USB Port2 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 2-2
Properties : 0x01
IsUserConnectable : yes
PortIsDebugCapable : no
PortHasMultiCompanions : no
PortConnectorIsTypeC : no
ConnectionIndex : 0x02 (Port 2)
CompanionIndex : 0
CompanionHubSymLnk : USB#ROOT_HUB30#5&34c0e95c&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
CompanionPortNumber : 0x07 (Port 7)
-> CompanionPortChain : 2-7
========================== Summary =========================
Vendor ID : 0x0B05 (ASUSTek Computer Inc.)
Product ID : 0x1AF5
USB Version : 2.0 -> but Device is Full-Speed only
Port maximum Speed : High-Speed (Companion Port 2-7 is doing the SuperSpeed)
Device maximum Speed : Full-Speed
Device Connection Speed : Full-Speed
Self powered : yes
Demanded Current : 100 mA
Used Endpoints : 5
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB Composite Device
Device Path : \\?\USB#VID_0B05&PID_1AF5#6&4420b4e&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Kernel Name : \Device\USBPDO-14
Device ID : USB\VID_0B05&PID_1AF5\6&4420B4E&0&2
Hardware IDs : USB\VID_0B05&PID_1AF5&REV_0108 USB\VID_0B05&PID_1AF5
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0025 (GUID_DEVCLASS_USB)
Driver : \SystemRoot\System32\drivers\usbccgp.sys (Version: 10.0.26100.560 Date: 2024-06-26 Company: Microsoft Corporation)
Driver Inf : C:\WINDOWS\inf\usb.inf
Legacy BusType : PNPBus
Class : USB
Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
Service : usbccgp
Enumerator : USB
Location Info : Port_#0002.Hub_#0001
Address : 2
Location IDs : PCIROOT(0)#PCI(0801)#PCI(0003)#USBROOT(0)#USB(2), ACPI(_SB_)#ACPI(PCI0)#ACPI(GP17)#ACPI(XHC0)#ACPI(RHUB)#ACPI(PRT2)
Container ID : {7cc615db-3a11-11ef-9f8a-c88a9a60b63d}
Manufacturer Info : (标准 USB 主控制器)
Capabilities : 0x84 (Removable, SurpriseRemovalOK)
Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
Address : 2
EnhancedPowerMgmtEnabled : 0
Power State : D0 (supported: D0, D1, D2, D3, wake from D0, wake from D1, wake from D2)
+++++++++++++++++ Registry USB Flags +++++++++++++++++
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0B051AF50108
osvc : REG_BINARY 00 00
---------------- Connection Information ---------------
Connection Index : 0x02 (Port 2)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01 (Configuration 1)
Device Address : 0x03 (3)
Is Hub : 0x00 (no)
Device Bus Speed : 0x01 (Full-Speed)
Number of open Pipes : 0x04 (4 pipes to data endpoints)
Pipe[0] : EndpointID=4 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[1] : EndpointID=4 Direction=OUT ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x40 bInterval=1 -> 718 Bits/ms = 89750 Bytes/s
Pipe[2] : EndpointID=2 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0xB bInterval=1 -> 224 Bits/ms = 28000 Bytes/s
Pipe[3] : EndpointID=1 Direction=IN ScheduleOffset=0 Type=Interrupt wMaxPacketSize=0x15 bInterval=1 -> 317 Bits/ms = 39625 Bytes/s
Data (HexDump) : 02 00 00 00 12 01 00 02 00 00 00 20 05 0B F5 1A ........... ....
08 01 01 02 00 01 01 01 00 03 00 04 00 00 00 01 ................
00 00 00 07 05 84 03 40 00 01 00 00 00 00 07 05 .......@........
04 03 40 00 01 00 00 00 00 07 05 82 03 0B 00 01 ..@.............
00 00 00 00 07 05 81 03 15 00 01 00 00 00 00 ...............
--------------- Connection Information V2 -------------
Connection Index : 0x02 (2)
Length : 0x10 (16 bytes)
SupportedUsbProtocols : 0x03
Usb110 : 1 (yes, port supports USB 1.1)
Usb200 : 1 (yes, port supports USB 2.0)
Usb300 : 0 (no, port not supports USB 3.0) -> but Companion Port 2-7 does
ReservedMBZ : 0x00
Flags : 0x00
DevIsOpAtSsOrHigher : 0 (Device is not operating at SuperSpeed or higher)
DevIsSsCapOrHigher : 0 (Device is not SuperSpeed capable or higher)
DevIsOpAtSsPlusOrHigher : 0 (Device is not operating at SuperSpeedPlus or higher)
DevIsSsPlusCapOrHigher : 0 (Device is not SuperSpeedPlus capable or higher)
ReservedMBZ : 0x00
Data (HexDump) : 02 00 00 00 10 00 00 00 03 00 00 00 00 00 00 00 ................
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.0)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x20 (32 bytes)
idVendor : 0x0B05 (ASUSTek Computer Inc.)
idProduct : 0x1AF5
bcdDevice : 0x0108
iManufacturer : 0x01 (String Descriptor 1)
Language 0x0409 : "ASUSTeK"
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
iSerialNumber : 0x00 (No String Descriptor)
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 20 05 0B F5 1A 08 01 01 02 ....... ........
00 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x005B (91 bytes)
bNumInterfaces : 0x03 (3 Interfaces)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x00 (No String Descriptor)
bmAttributes : 0xE0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x01 (yes)
D5: Remote Wakeup : 0x01 (yes)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0x32 (100 mA)
Data (HexDump) : 09 02 5B 00 03 01 00 E0 32 09 04 00 00 02 03 00 ..[.....2.......
00 00 09 21 11 01 00 01 22 22 00 07 05 84 03 40 ...!...."".....@
00 01 07 05 04 03 40 00 01 09 04 01 00 01 03 01 ......@.........
02 00 09 21 11 01 00 01 22 52 00 07 05 82 03 0B ...!...."R......
00 01 09 04 02 00 01 03 00 00 00 09 21 11 01 00 ............!...
01 22 88 00 07 05 81 03 15 00 01 .".........
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00 (Interface 0)
bAlternateSetting : 0x00
bNumEndpoints : 0x02 (2 Endpoints)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 02 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 22 00 .!...."".
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0022 (34 bytes)
06 01 FF Usage Page (Vendor Defined)
09 01 Usage (unk)
A1 01 Collection (Application)
09 02 Usage (unk)
15 00 Logical Minimum (0)
26 FF 00 Logical Maximum (255)
75 08 Report Size (8)
95 40 Report Count (64)
81 02 Input (Var)
09 03 Usage (unk)
15 00 Logical Minimum (0)
26 FF 00 Logical Maximum (255)
75 08 Report Size (8)
95 40 Report Count (64)
91 02 Output (Var)
C0 End Collection
Data (HexDump) : 06 01 FF 09 01 A1 01 09 02 15 00 26 FF 00 75 08 ...........&..u.
95 40 81 02 09 03 15 00 26 FF 00 75 08 95 40 91 .@......&..u..@.
02 C0 ..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x84 (Direction=IN EndpointID=4)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 84 03 40 00 01 ....@..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x04 (Direction=OUT EndpointID=4)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 04 03 40 00 01 ....@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x01 (Interface 1)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x01 (Boot Interface)
bInterfaceProtocol : 0x02 (Mouse)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 01 00 01 03 01 02 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 52 00 .!...."R.
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0052 (82 bytes)
05 01 Usage Page (Generic Desktop Controls)
09 02 Usage (Mouse)
A1 01 Collection (Application)
09 01 Usage (Pointer)
A1 00 Collection (Physical)
05 01 Usage Page (Generic Desktop Controls)
09 30 Usage (Direction-X)
09 31 Usage (Direction-Y)
16 00 80 Logical Minimum (-32768)
26 FF 7F Logical Maximum (32767)
75 10 Report Size (16)
95 02 Report Count (2)
81 06 Input (Var, Rel)
05 09 Usage Page (Buttons)
19 01 Usage Minimum (1)
29 05 Usage Maximum (5)
15 00 Logical Minimum (0)
25 01 Logical Maximum (1)
75 01 Report Size (1)
95 05 Report Count (5)
81 02 Input (Var)
75 01 Report Size (1)
95 03 Report Count (3)
81 01 Input (Const)
05 01 Usage Page (Generic Desktop Controls)
09 38 Usage (Wheel)
15 81 Logical Minimum (-127)
25 7F Logical Maximum (127)
75 08 Report Size (8)
95 01 Report Count (1)
81 06 Input (Var, Rel)
06 00 FF Usage Page (Vendor Defined)
09 F1 Usage (unk)
75 08 Report Size (8)
95 05 Report Count (5)
15 00 Logical Minimum (0)
26 FF 00 Logical Maximum (255)
81 00 Input ()
C0 End Collection
C0 End Collection
Data (HexDump) : 05 01 09 02 A1 01 09 01 A1 00 05 01 09 30 09 31 .............0.1
16 00 80 26 FF 7F 75 10 95 02 81 06 05 09 19 01 ...&..u.........
29 05 15 00 25 01 75 01 95 05 81 02 75 01 95 03 )...%.u.....u...
81 01 05 01 09 38 15 81 25 7F 75 08 95 01 81 06 .....8..%.u.....
06 00 FF 09 F1 75 08 95 05 15 00 26 FF 00 81 00 .....u.....&....
C0 C0 ..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x82 (Direction=IN EndpointID=2)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x000B (11 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 82 03 0B 00 01 .......
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x02 (Interface 2)
bAlternateSetting : 0x00
bNumEndpoints : 0x01 (1 Endpoint)
bInterfaceClass : 0x03 (HID - Human Interface Device)
bInterfaceSubClass : 0x00 (None)
bInterfaceProtocol : 0x00 (None)
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 02 00 01 03 00 00 00 .........
------------------- HID Descriptor --------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x21 (HID Descriptor)
bcdHID : 0x0111 (HID Version 1.11)
bCountryCode : 0x00 (00 = not localized)
bNumDescriptors : 0x01
Data (HexDump) : 09 21 11 01 00 01 22 88 00 .!...."..
Descriptor 1:
bDescriptorType : 0x22 (Class=Report)
wDescriptorLength : 0x0088 (136 bytes)
05 0C Usage Page (Consumer)
09 01 Usage (Consumer Control)
A1 01 Collection (Application)
85 01 Report ID (0x01)
05 0C Usage Page (Consumer)
75 01 Report Size (1)
95 07 Report Count (7)
15 00 Logical Minimum (0)
25 01 Logical Maximum (1)
09 CD Usage (Play/Pause)
09 B7 Usage (Stop)
09 B6 Usage (Scan Previous Track)
09 B5 Usage (Scan Next Track)
09 E2 Usage (Mute)
09 EA Usage (Volume Decrement)
09 E9 Usage (Volume Increment)
81 02 Input (Var)
75 01 Report Size (1)
95 01 Report Count (1)
81 01 Input (Const)
C0 End Collection
05 01 Usage Page (Generic Desktop Controls)
09 80 Usage (System Control)
A1 01 Collection (Application)
85 02 Report ID (0x02)
75 01 Report Size (1)
95 03 Report Count (3)
15 00 Logical Minimum (0)
25 01 Logical Maximum (1)
09 81 Usage (System Power Down)
09 82 Usage (System Sleep)
09 83 Usage (System Wake Up)
81 02 Input (Var)
75 05 Report Size (5)
95 01 Report Count (1)
81 01 Input (Const)
C0 End Collection
06 C1 FF Usage Page (Vendor Defined)
09 01 Usage (unk)
A1 01 Collection (Application)
85 03 Report ID (0x03)
09 02 Usage (unk)
75 08 Report Size (8)
95 14 Report Count (20)
15 00 Logical Minimum (0)
26 FF 00 Logical Maximum (255)
81 00 Input ()
C0 End Collection
05 01 Usage Page (Generic Desktop Controls)
09 06 Usage (Keyboard)
A1 01 Collection (Application)
85 04 Report ID (0x04)
75 01 Report Size (1)
95 08 Report Count (8)
15 00 Logical Minimum (0)
25 01 Logical Maximum (1)
05 07 Usage Page (Keyboard)
19 E0 Usage Minimum (-32)
29 E7 Usage Maximum (-25)
81 02 Input (Var)
75 01 Report Size (1)
95 98 Report Count (152)
15 00 Logical Minimum (0)
25 01 Logical Maximum (1)
05 07 Usage Page (Keyboard)
19 00 Usage Minimum (0)
29 78 Usage Maximum (120)
81 02 Input (Var)
C0 End Collection
Data (HexDump) : 05 0C 09 01 A1 01 85 01 05 0C 75 01 95 07 15 00 ..........u.....
25 01 09 CD 09 B7 09 B6 09 B5 09 E2 09 EA 09 E9 %...............
81 02 75 01 95 01 81 01 C0 05 01 09 80 A1 01 85 ..u.............
02 75 01 95 03 15 00 25 01 09 81 09 82 09 83 81 .u.....%........
02 75 05 95 01 81 01 C0 06 C1 FF 09 01 A1 01 85 .u..............
03 09 02 75 08 95 14 15 00 26 FF 00 81 00 C0 05 ...u.....&......
01 09 06 A1 01 85 04 75 01 95 08 15 00 25 01 05 .......u.....%..
07 19 E0 29 E7 81 02 75 01 95 98 15 00 25 01 05 ...)...u.....%..
07 19 00 29 78 81 02 C0 ...)x...
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
bmAttributes : 0x03 (TransferType=Interrupt)
wMaxPacketSize : 0x0015 (21 bytes)
bInterval : 0x01 (1 ms)
Data (HexDump) : 07 05 81 03 15 00 01 .......
-------------------- String Descriptors -------------------
------ String Descriptor 0 ------
bLength : 0x04 (4 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language ID[0] : 0x0409 (English - United States)
Data (HexDump) : 04 03 09 04 ....
------ String Descriptor 1 ------
bLength : 0x10 (16 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUSTeK"
Data (HexDump) : 10 03 41 00 53 00 55 00 53 00 54 00 65 00 4B 00 ..A.S.U.S.T.e.K.
------ String Descriptor 2 ------
bLength : 0x34 (52 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "ASUS TX GAMING MOUSE MINI"
Data (HexDump) : 34 03 41 00 53 00 55 00 53 00 20 00 54 00 58 00 4.A.S.U.S. .T.X.
20 00 47 00 41 00 4D 00 49 00 4E 00 47 00 20 00 .G.A.M.I.N.G. .
4D 00 4F 00 55 00 53 00 45 00 20 00 4D 00 49 00 M.O.U.S.E. .M.I.
4E 00 49 00 N.I.
|
Beta Was this translation helpful? Give feedback.
-
|
This build should do it then. Please let me know whether it works correctly for both the wired and the wireless connection |
Beta Was this translation helpful? Give feedback.
-
|
This build works very well, thank you for your work. |
Beta Was this translation helpful? Give feedback.
-
|
Alright. I will push the mouse profile and it will be available in one of the next updates |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
It's not supported yet, but we can add it if you give us the necessary info and do the testing. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, |
Beta Was this translation helpful? Give feedback.
-
|
This is a known limitation as it uses the Omni Receiver. Right now, only the Harpe Ace works with the Omni receiver. It will take some time for me to get some of those Omni Mice here and find out how to detect which is which behind the receiver. |
Beta Was this translation helpful? Give feedback.
and others
-
Hello fellow community,
Since recent update G-Helper can control your external Asus Mouse and possibly other peripherals.
Thanks again to @IceStormNG 👑 for contribution and research (!).
SUBMIT NEW REQUESTS HERE
Currently supported models
Beta Was this translation helpful? Give feedback.
All reactions