kilo.c

/* Kilo -- A very simple editor in less than 1-kilo lines of code (as counted
 *         by "cloc"). Does not depend on libcurses, directly emits VT100
 *         escapes on the terminal.
 *
 * -----------------------------------------------------------------------
 *
 * Copyright (C) 2016 Salvatore Sanfilippo <antirez at gmail dot com>
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *  *  Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *  *  Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#define KILO_VERSION "0.0.1"

#ifdef __linux__
#define _POSIX_C_SOURCE 200809L
#endif

#include <termios.h>
#include <stdbool.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>
#include <errno.h>
#include <string.h>
#include <ctype.h>
#include <time.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/time.h>
#include <sys/wait.h>
#include <unistd.h>
#include <stdarg.h>
#include <fcntl.h>
#include <signal.h>
#include <netdb.h>
#include <pthread.h>

/* Server Communication */
#define _POSIX_SOURCE
#define MSGSIZE 1024
static int serverFd;
static pthread_t read_thread;

/* Temporary File */
static char filename[100] = "";

/* Syntax highlight types */
#define HL_NORMAL 0
#define HL_NONPRINT 1
#define HL_COMMENT 2   /* Single line comment. */
#define HL_MLCOMMENT 3 /* Multi-line comment. */
#define HL_KEYWORD1 4
#define HL_KEYWORD2 5
#define HL_STRING 6
#define HL_NUMBER 7
#define HL_MATCH 8      /* Search match. */

#define HL_HIGHLIGHT_STRINGS (1<<0)
#define HL_HIGHLIGHT_NUMBERS (1<<1)

struct editorSyntax {
    char **filematch;
    char **keywords;
    char singleline_comment_start[2];
    char multiline_comment_start[3];
    char multiline_comment_end[3];
    int flags;
};

/* This structure represents a single line of the file we are editing. */
typedef struct erow {
    int idx;            /* Row index in the file, zero-based. */
    int size;           /* Size of the row, excluding the null term. */
    int rsize;          /* Size of the rendered row. */
    char *chars;        /* Row content. */
    char *render;       /* Row content "rendered" for screen (for TABs). */
    unsigned char *hl;  /* Syntax highlight type for each character in render.*/
    int hl_oc;          /* Row had open comment at end in last syntax highlight
                           check. */
} erow;

typedef struct hlcolor {
    int r,g,b;
} hlcolor;

struct editorConfig {
    int cx,cy;  /* Cursor x and y position in characters */
    int rowoff;     /* Offset of row displayed. */
    int coloff;     /* Offset of column displayed. */
    int screenrows; /* Number of rows that we can show */
    int screencols; /* Number of cols that we can show */
    int numrows;    /* Number of rows */
    int rawmode;    /* Is terminal raw mode enabled? */
    erow *row;      /* Rows */
    int dirty;      /* File modified but not saved. */
    char *filename; /* Currently open filename */
    char statusmsg[80];
    time_t statusmsg_time;
    struct editorSyntax *syntax;    /* Current syntax highlight, or NULL. */
};

static struct editorConfig E;

enum KEY_ACTION{
        KEY_NULL = 0,       /* NULL */
        CTRL_C = 3,         /* Ctrl-c */
        CTRL_D = 4,         /* Ctrl-d */
        CTRL_F = 6,         /* Ctrl-f */
        CTRL_H = 8,         /* Ctrl-h */
        TAB = 9,            /* Tab */
        CTRL_L = 12,        /* Ctrl+l */
        ENTER = 13,         /* Enter */
        CTRL_Q = 17,        /* Ctrl-q */
        CTRL_S = 19,        /* Ctrl-s */
        CTRL_U = 21,        /* Ctrl-u */
        ESC = 27,           /* Escape */
        BACKSPACE =  127,   /* Backspace */
        /* The following are just soft codes, not really reported by the
         * terminal directly. */
        ARROW_LEFT = 1000,
        ARROW_RIGHT,
        ARROW_UP,
        ARROW_DOWN,
        DEL_KEY,
        HOME_KEY,
        END_KEY,
        PAGE_UP,
        PAGE_DOWN
};

//print to debug file
void debug_print(char * s){
    FILE *debug = fopen("debug", "a");
    fprintf(debug, "%s\n", s);
    fclose(debug);
}

void editorSetStatusMessage(const char *fmt, ...);

/* =========================== Syntax highlights DB =========================
 *
 * In order to add a new syntax, define two arrays with a list of file name
 * matches and keywords. The file name matches are used in order to match
 * a given syntax with a given file name: if a match pattern starts with a
 * dot, it is matched as the last past of the filename, for example ".c".
 * Otherwise the pattern is just searched inside the filenme, like "Makefile").
 *
 * The list of keywords to highlight is just a list of words, however if they
 * a trailing '|' character is added at the end, they are highlighted in
 * a different color, so that you can have two different sets of keywords.
 *
 * Finally add a stanza in the HLDB global variable with two two arrays
 * of strings, and a set of flags in order to enable highlighting of
 * comments and numbers.
 *
 * The characters for single and multi line comments must be exactly two
 * and must be provided as well (see the C language example).
 *
 * There is no support to highlight patterns currently. */

/* C / C++ */
char *C_HL_extensions[] = {".c",".h",".cpp",".hpp",".cc",NULL};
char *C_HL_keywords[] = {
	/* C Keywords */
	"auto","break","case","continue","default","do","else","enum",
	"extern","for","goto","if","register","return","sizeof","static",
	"struct","switch","typedef","union","volatile","while","NULL",

	/* C++ Keywords */
	"alignas","alignof","and","and_eq","asm","bitand","bitor","class",
	"compl","constexpr","const_cast","deltype","delete","dynamic_cast",
	"explicit","export","false","friend","inline","mutable","namespace",
	"new","noexcept","not","not_eq","nullptr","operator","or","or_eq",
	"private","protected","public","reinterpret_cast","static_assert",
	"static_cast","template","this","thread_local","throw","true","try",
	"typeid","typename","virtual","xor","xor_eq",

	/* C types */
        "int|","long|","double|","float|","char|","unsigned|","signed|",
        "void|","short|","auto|","const|","bool|",NULL
};

/* Here we define an array of syntax highlights by extensions, keywords,
 * comments delimiters and flags. */
struct editorSyntax HLDB[] = {
    {
        /* C / C++ */
        C_HL_extensions,
        C_HL_keywords,
        "//","/*","*/",
        HL_HIGHLIGHT_STRINGS | HL_HIGHLIGHT_NUMBERS
    }
};

#define HLDB_ENTRIES (sizeof(HLDB)/sizeof(HLDB[0]))

/* ======================= Low level terminal handling ====================== */

static struct termios orig_termios; /* In order to restore at exit.*/

void disableRawMode(int fd) {
    /* Don't even check the return value as it's too late. */
    if (E.rawmode) {
        tcsetattr(fd,TCSAFLUSH,&orig_termios);
        E.rawmode = 0;
    }
}

/* Called at exit to avoid remaining in raw mode. */
void editorAtExit(void) {
    disableRawMode(STDIN_FILENO);
}

/* Raw mode: 1960 magic*/
int enableRawMode(int fd) {
    struct termios raw;

    if (E.rawmode) return 0; /* Already enabled. */
    if (!isatty(STDIN_FILENO)) goto fatal;
    atexit(editorAtExit);
    if (tcgetattr(fd,&orig_termios) == -1) goto fatal;

    raw = orig_termios;  /* modify the original mode */
    /* input modes: no break, no CR to NL, no parity check, no strip char,
     * no start/stop output control. */
    raw.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON);
    /* output modes - disable post processing */
    raw.c_oflag &= ~(OPOST);
    /* control modes - set 8 bit chars */
    raw.c_cflag |= (CS8);
    /* local modes - choing off, canonical off, no extended functions,
     * no signal chars (^Z,^C) */
    raw.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG);
    /* control chars - set return condition: min number of bytes and timer. */
    raw.c_cc[VMIN] = 0; /* Return each byte, or zero for timeout. */
    raw.c_cc[VTIME] = 1; /* 100 ms timeout (unit is tens of second). */

    /* put terminal in raw mode after flushing */
    if (tcsetattr(fd,TCSAFLUSH,&raw) < 0) goto fatal;
    E.rawmode = 1;
    return 0;

fatal:
    errno = ENOTTY;
    return -1;
}

/* Read a key from the terminal put in raw mode, trying to handle
 * escape sequences. */
int editorReadKey(int fd) {
    int nread;
    char c, seq[3];
    while ((nread = read(fd,&c,1)) == 0);
    if (nread == -1) exit(EXIT_FAILURE);

    while(1) {
        switch(c) {
        case ESC:    /* escape sequence */
            /* If this is just an ESC, we'll timeout here. */
            if (read(fd,seq,1) == 0) return ESC;
            if (read(fd,seq+1,1) == 0) return ESC;

            /* ESC [ sequences. */
            if (seq[0] == '[') {
                if (seq[1] >= '0' && seq[1] <= '9') {
                    /* Extended escape, read additional byte. */
                    if (read(fd,seq+2,1) == 0) return ESC;
                    if (seq[2] == '~') {
                        switch(seq[1]) {
                        case '3': return DEL_KEY;
                        case '5': return PAGE_UP;
                        case '6': return PAGE_DOWN;
                        }
                    }
                } else {
                    switch(seq[1]) {
                    case 'A': return ARROW_UP;
                    case 'B': return ARROW_DOWN;
                    case 'C': return ARROW_RIGHT;
                    case 'D': return ARROW_LEFT;
                    case 'H': return HOME_KEY;
                    case 'F': return END_KEY;
                    }
                }
            }

            /* ESC O sequences. */
            else if (seq[0] == 'O') {
                switch(seq[1]) {
                case 'H': return HOME_KEY;
                case 'F': return END_KEY;
                }
            }
            break;
        default:
            return c;
        }
    }
}

/* Use the ESC [6n escape sequence to query the horizontal cursor position
 * and return it. On error -1 is returned, on success the position of the
 * cursor is stored at *rows and *cols and 0 is returned. */
int getCursorPosition(int ifd, int ofd, int *rows, int *cols) {
    char buf[32];
    unsigned int i = 0;

    /* Report cursor location */
    if (write(ofd, "\x1b[6n", 4) != 4) return -1;

    /* Read the response: ESC [ rows ; cols R */
    while (i < sizeof(buf)-1) {
        if (read(ifd,buf+i,1) != 1) break;
        if (buf[i] == 'R') break;
        i++;
    }
    buf[i] = '\0';

    /* Parse it. */
    if (buf[0] != ESC || buf[1] != '[') return -1;
    if (sscanf(buf+2,"%d;%d",rows,cols) != 2) return -1;
    return 0;
}

/* Try to get the number of columns in the current terminal. If the ioctl()
 * call fails the function will try to query the terminal itself.
 * Returns 0 on success, -1 on error. */
int getWindowSize(int ifd, int ofd, int *rows, int *cols) {
    struct winsize ws;

    if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) {
        /* ioctl() failed. Try to query the terminal itself. */
        int orig_row, orig_col, retval;

        /* Get the initial position so we can restore it later. */
        retval = getCursorPosition(ifd,ofd,&orig_row,&orig_col);
        if (retval == -1) goto failed;

        /* Go to right/bottom margin and get position. */
        if (write(ofd,"\x1b[999C\x1b[999B",12) != 12) goto failed;
        retval = getCursorPosition(ifd,ofd,rows,cols);
        if (retval == -1) goto failed;

        /* Restore position. */
        char seq[32];
        snprintf(seq,32,"\x1b[%d;%dH",orig_row,orig_col);
        if (write(ofd,seq,strlen(seq)) == -1) {
            /* Can't recover... */
        }
        return 0;
    } else {
        *cols = ws.ws_col;
        *rows = ws.ws_row;
        return 0;
    }

failed:
    return -1;
}

/* ====================== Syntax highlight color scheme  ==================== */

int is_separator(int c) {
    return c == '\0' || isspace(c) || strchr(",.()+-/*=~%[];",c) != NULL;
}

/* Return true if the specified row last char is part of a multi line comment
 * that starts at this row or at one before, and does not end at the end
 * of the row but spawns to the next row. */
int editorRowHasOpenComment(erow *row) {
    if (row->hl && row->rsize && row->hl[row->rsize-1] == HL_MLCOMMENT &&
        (row->rsize < 2 || (row->render[row->rsize-2] != '*' ||
                            row->render[row->rsize-1] != '/'))) return 1;
    return 0;
}

/* Set every byte of row->hl (that corresponds to every character in the line)
 * to the right syntax highlight type (HL_* defines). */
void editorUpdateSyntax(erow *row) {
    row->hl = realloc(row->hl,row->rsize);
    memset(row->hl,HL_NORMAL,row->rsize);

    if (E.syntax == NULL) return; /* No syntax, everything is HL_NORMAL. */

    int i, prev_sep, in_string, in_comment;
    char *p;
    char **keywords = E.syntax->keywords;
    char *scs = E.syntax->singleline_comment_start;
    char *mcs = E.syntax->multiline_comment_start;
    char *mce = E.syntax->multiline_comment_end;

    /* Point to the first non-space char. */
    p = row->render;
    i = 0; /* Current char offset */
    while(*p && isspace(*p)) {
        p++;
        i++;
    }
    prev_sep = 1; /* Tell the parser if 'i' points to start of word. */
    in_string = 0; /* Are we inside "" or '' ? */
    in_comment = 0; /* Are we inside multi-line comment? */

    /* If the previous line has an open comment, this line starts
     * with an open comment state. */
    if (row->idx > 0 && editorRowHasOpenComment(&E.row[row->idx-1]))
        in_comment = 1;

    while(*p) {
        /* Handle // comments. */
        if (prev_sep && *p == scs[0] && *(p+1) == scs[1]) {
            /* From here to end is a comment */
            memset(row->hl+i,HL_COMMENT,row->size-i);
            return;
        }

        /* Handle multi line comments. */
        if (in_comment) {
            row->hl[i] = HL_MLCOMMENT;
            if (*p == mce[0] && *(p+1) == mce[1]) {
                row->hl[i+1] = HL_MLCOMMENT;
                p += 2; i += 2;
                in_comment = 0;
                prev_sep = 1;
                continue;
            } else {
                prev_sep = 0;
                p++; i++;
                continue;
            }
        } else if (*p == mcs[0] && *(p+1) == mcs[1]) {
            row->hl[i] = HL_MLCOMMENT;
            row->hl[i+1] = HL_MLCOMMENT;
            p += 2; i += 2;
            in_comment = 1;
            prev_sep = 0;
            continue;
        }

        /* Handle "" and '' */
        if (in_string) {
            row->hl[i] = HL_STRING;
            if (*p == '\\') {
                row->hl[i+1] = HL_STRING;
                p += 2; i += 2;
                prev_sep = 0;
                continue;
            }
            if (*p == in_string) in_string = 0;
            p++; i++;
            continue;
        } else {
            if (*p == '"' || *p == '\'') {
                in_string = *p;
                row->hl[i] = HL_STRING;
                p++; i++;
                prev_sep = 0;
                continue;
            }
        }

        /* Handle non printable chars. */
        if (!isprint(*p)) {
            row->hl[i] = HL_NONPRINT;
            p++; i++;
            prev_sep = 0;
            continue;
        }

        /* Handle numbers */
        if ((isdigit(*p) && (prev_sep || row->hl[i-1] == HL_NUMBER)) ||
            (*p == '.' && i >0 && row->hl[i-1] == HL_NUMBER)) {
            row->hl[i] = HL_NUMBER;
            p++; i++;
            prev_sep = 0;
            continue;
        }

        /* Handle keywords and lib calls */
        if (prev_sep) {
            int j;
            for (j = 0; keywords[j]; j++) {
                int klen = strlen(keywords[j]);
                int kw2 = keywords[j][klen-1] == '|';
                if (kw2) klen--;

                if (!memcmp(p,keywords[j],klen) &&
                    is_separator(*(p+klen)))
                {
                    /* Keyword */
                    memset(row->hl+i,kw2 ? HL_KEYWORD2 : HL_KEYWORD1,klen);
                    p += klen;
                    i += klen;
                    break;
                }
            }
            if (keywords[j] != NULL) {
                prev_sep = 0;
                continue; /* We had a keyword match */
            }
        }

        /* Not special chars */
        prev_sep = is_separator(*p);
        p++; i++;
    }

    /* Propagate syntax change to the next row if the open commen
     * state changed. This may recursively affect all the following rows
     * in the file. */
    int oc = editorRowHasOpenComment(row);
    if (row->hl_oc != oc && row->idx+1 < E.numrows)
        editorUpdateSyntax(&E.row[row->idx+1]);
    row->hl_oc = oc;
}

/* Maps syntax highlight token types to terminal colors. */
int editorSyntaxToColor(int hl) {
    switch(hl) {
    case HL_COMMENT:
    case HL_MLCOMMENT: return 36;     /* cyan */
    case HL_KEYWORD1: return 33;    /* yellow */
    case HL_KEYWORD2: return 32;    /* green */
    case HL_STRING: return 35;      /* magenta */
    case HL_NUMBER: return 31;      /* red */
    case HL_MATCH: return 34;      /* blu */
    default: return 37;             /* white */
    }
}

/* Select the syntax highlight scheme depending on the filename,
 * setting it in the global state E.syntax. */
void editorSelectSyntaxHighlight(char *filename) {
    for (unsigned int j = 0; j < HLDB_ENTRIES; j++) {
        struct editorSyntax *s = HLDB+j;
        unsigned int i = 0;
        while(s->filematch[i]) {
            char *p;
            int patlen = strlen(s->filematch[i]);
            if ((p = strstr(filename,s->filematch[i])) != NULL) {
                if (s->filematch[i][0] != '.' || p[patlen] == '\0') {
                    E.syntax = s;
                    return;
                }
            }
            i++;
        }
    }
}

/* ======================= Editor rows implementation ======================= */

/* Update the rendered version and the syntax highlight of a row. */
void editorUpdateRow(erow *row) {
    unsigned int tabs = 0, nonprint = 0;
    int j, idx;

   /* Create a version of the row we can directly print on the screen,
     * respecting tabs, substituting non printable characters with '?'. */
    free(row->render);
    for (j = 0; j < row->size; j++)
        if (row->chars[j] == TAB) tabs++;

    unsigned long long allocsize =
        (unsigned long long) row->size + tabs*8 + nonprint*9 + 1;
    if (allocsize > UINT32_MAX) {
        printf("Some line of the edited file is too long for kilo\n");
        exit(EXIT_FAILURE);
    }

    row->render = malloc(row->size + tabs*8 + nonprint*9 + 1);
    idx = 0;
    for (j = 0; j < row->size; j++) {
        if (row->chars[j] == TAB) {
            row->render[idx++] = ' ';
            while((idx+1) % 8 != 0) row->render[idx++] = ' ';
        } else {
            row->render[idx++] = row->chars[j];
        }
    }
    row->rsize = idx;
    row->render[idx] = '\0';

    /* Update the syntax highlighting attributes of the row. */
    editorUpdateSyntax(row);
}

/* Insert a row at the specified position, shifting the other rows on the bottom
 * if required. */
void editorInsertRow(int at, char *s, size_t len, bool sendToServer) {
    if (at > E.numrows) return;
    E.row = realloc(E.row,sizeof(erow)*(E.numrows+1));
    if (at != E.numrows) {
        memmove(E.row+at+1,E.row+at,sizeof(E.row[0])*(E.numrows-at));
        for (int j = at+1; j <= E.numrows; j++) E.row[j].idx++;
    }
    E.row[at].size = len;
    E.row[at].chars = malloc(len+1);
    memcpy(E.row[at].chars,s,len+1);
    E.row[at].hl = NULL;
    E.row[at].hl_oc = 0;
    E.row[at].render = NULL;
    E.row[at].rsize = 0;
    E.row[at].idx = at;
    editorUpdateRow(E.row+at); 
    E.numrows++;
    E.dirty++;

    //setup server message
    if(sendToServer){
        char msg[MSGSIZE];
        sprintf(msg, "ir:%d:%s", at, s);
        send(serverFd, msg, MSGSIZE, 0);
    }
}

/* Free row's heap allocated stuff. */
void editorFreeRow(erow *row) {
    free(row->render);
    free(row->chars);
    free(row->hl);
}

/* Remove the row at the specified position, shifting the remaining on the
 * top. */
void editorDelRow(int at, bool sendToServer) {
    erow *row;

    if (at >= E.numrows) return; //don't delete non-existant row
    row = E.row+at; //get row from index
    editorFreeRow(row); //free the row
    memmove(E.row+at,E.row+at+1,sizeof(E.row[0])*(E.numrows-at-1)); //copy data of the remaining rows back one slot
    for (int j = at; j < E.numrows-1; j++) E.row[j].idx = j; //reset the index of the rows
    E.numrows--;
    E.dirty++;

    //setup server message
    if(sendToServer){
        char msg[MSGSIZE];
        sprintf(msg, "dr:%d", at);
        send(serverFd, msg, MSGSIZE, 0);
    }
}

/* Turn the editor rows into a single heap-allocated string.
 * Returns the pointer to the heap-allocated string and populate the
 * integer pointed by 'buflen' with the size of the string, escluding
 * the final nulterm. */
char *editorRowsToString(int *buflen) {
    char *buf = NULL, *p;
    int totlen = 0;
    int j;

    /* Compute count of bytes */
    for (j = 0; j < E.numrows; j++)
        totlen += E.row[j].size+1; /* +1 is for "\n" at end of every row */
    *buflen = totlen;
    totlen++; /* Also make space for nulterm */

    p = buf = malloc(totlen);
    for (j = 0; j < E.numrows; j++) {
        memcpy(p,E.row[j].chars,E.row[j].size);
        p += E.row[j].size;
        *p = '\n';
        p++;
    }
    *p = '\0';
    return buf;
}

/* Insert a character at the specified position in a row, moving the remaining
 * chars on the right if needed. */
void editorRowInsertChar(erow *row, int at, int c, bool sendToServer) {
    if (at > row->size) {
        /* Pad the string with spaces if the insert location is outside the
         * current length by more than a single character. */
        int padlen = at-row->size;
        /* In the next line +2 means: new char and null term. */
        row->chars = realloc(row->chars,row->size+padlen+2);
        memset(row->chars+row->size,' ',padlen);
        row->chars[row->size+padlen+1] = '\0';
        row->size += padlen+1;
    } else {
        /* If we are in the middle of the string just make space for 1 new
         * char plus the (already existing) null term. */
        row->chars = realloc(row->chars,row->size+2);
        memmove(row->chars+at+1,row->chars+at,row->size-at+1);
        row->size++;
    }
    row->chars[at] = c;
    if(c == '\0'){
        row->size = at;
    }
    editorUpdateRow(row);
    E.dirty++;

    //setup server message
    if(sendToServer){
        char msg[MSGSIZE];
        sprintf(msg, "ic:%d:%d:%c", row->idx, at, c);
        send(serverFd, msg, MSGSIZE, 0);
    }
}

/* Append the string 's' at the end of a row */
void editorRowAppendString(erow *row, char *s, size_t len, bool sendToServer) {
    row->chars = realloc(row->chars,row->size+len+1);
    memcpy(row->chars+row->size,s,len);
    row->size += len;
    row->chars[row->size] = '\0';
    editorUpdateRow(row);
    E.dirty++;

    //setup server message
    if(sendToServer){
        char msg[MSGSIZE];
        sprintf(msg, "as:%d:%s", row->idx, s);
        send(serverFd, msg, MSGSIZE, 0);
    }
}

/* Delete the character at offset 'at' from the specified row. */
void editorRowDelChar(erow *row, int at, bool sendToServer) {
    if (row->size <= at) return;
    memmove(row->chars+at,row->chars+at+1,row->size-at);
    editorUpdateRow(row);
    row->size--;
    E.dirty++;

    //setup server message
    if(sendToServer){
        char msg[MSGSIZE];
        sprintf(msg, "dc:%d:%d", row->idx, at);
        send(serverFd, msg, MSGSIZE, 0);
    }
}

/* Insert the specified char at the current prompt position. */
//don't need to make a server message here since we call editorInsertRow and editorRowInsertChar
void editorInsertChar(int c) {
    int filerow = E.rowoff+E.cy;
    int filecol = E.coloff+E.cx;
    erow *row = (filerow >= E.numrows) ? NULL : &E.row[filerow];

    /* If the row where the cursor is currently located does not exist in our
     * logical representaion of the file, add enough empty rows as needed. */
    if (!row) {
        while(E.numrows <= filerow)
            editorInsertRow(E.numrows,"",0,true);
    }
    row = &E.row[filerow];
    editorRowInsertChar(row,filecol,c,true);
    if (E.cx == E.screencols-1)
        E.coloff++;
    else
        E.cx++;
    E.dirty++;
}

/* Inserting a newline is slightly complex as we have to handle inserting a
 * newline in the middle of a line, splitting the line as needed. */
void editorInsertNewline() {
    int filerow = E.rowoff+E.cy;
    int filecol = E.coloff+E.cx;
    erow *row = (filerow >= E.numrows) ? NULL : &E.row[filerow];

    if (!row) {
        if (filerow == E.numrows) {
            editorInsertRow(filerow,"",0,true);
            
            goto fixcursor;
        }
        return;
    }
    /* If the cursor is over the current line size, we want to conceptually
     * think it's just over the last character. */
    if (filecol >= row->size) filecol = row->size;
    if (filecol == 0) {
        editorInsertRow(filerow,"",0,true);

    } else {
        /* We are in the middle of a line. Split it between two rows. */
        editorInsertRow(filerow+1,row->chars+filecol,row->size-filecol,true);

        row = &E.row[filerow];
        editorRowInsertChar(row, filecol, '\0', true);
            //this is the old code. i had to write it as a function call so that
            //the update would be reflected on other clients
            //row->chars[filecol] = '\0';
            //row->size = filecol;
        editorUpdateRow(row);
    }

fixcursor:
    if (E.cy == E.screenrows-1) {
        E.rowoff++;
    } else {
        E.cy++;
    }
    E.cx = 0;
    E.coloff = 0;
}

/* Delete the char at the current prompt position. */
//don't need to make a server message here since we call editorDelRow and editorRowDelChar
void editorDelChar() {
    int filerow = E.rowoff+E.cy;
    int filecol = E.coloff+E.cx;
    erow *row = (filerow >= E.numrows) ? NULL : &E.row[filerow];

    if (!row || (filecol == 0 && filerow == 0)) return;
    if (filecol == 0) {
        /* Handle the case of column 0, we need to move the current line
         * on the right of the previous one. */
        filecol = E.row[filerow-1].size;
        editorRowAppendString(&E.row[filerow-1],row->chars,row->size, true);
        editorDelRow(filerow, true);
        row = NULL;
        if (E.cy == 0)
            E.rowoff--;
        else
            E.cy--;
        E.cx = filecol;
        if (E.cx >= E.screencols) {
            int shift = (E.screencols-E.cx)+1;
            E.cx -= shift;
            E.coloff += shift;
        }
    } else {
        editorRowDelChar(row,filecol-1, true);
        if (E.cx == 0 && E.coloff)
            E.coloff--;
        else
            E.cx--;
    }
    if (row) editorUpdateRow(row);
    E.dirty++;
}

/* Load the specified program in the editor memory and returns 0 on success
 * or 1 on error. */
int editorOpen(char *filename) {
    FILE *fp;

    E.dirty = 0;
    free(E.filename);
    size_t fnlen = strlen(filename)+1;
    E.filename = malloc(fnlen);
    memcpy(E.filename,filename,fnlen);

    fp = fopen(filename,"r");
    if (!fp) {
        if (errno != ENOENT) {
            perror("Opening file");
            exit(EXIT_FAILURE);
        }
        return 1;
    }

    char *line = NULL;
    size_t linecap = 0;
    ssize_t linelen;
    while((linelen = getline(&line,&linecap,fp)) != -1) {
        if (linelen && (line[linelen-1] == '\n' || line[linelen-1] == '\r'))
            line[--linelen] = '\0';
        editorInsertRow(E.numrows,line,linelen,false);
    }
    free(line);
    fclose(fp);
    E.dirty = 0;
    remove(filename);
    return 0;
}

/* Save the current file on disk. Return 0 on success, 1 on error. */
int editorSave(void) {
    int len;
    char *buf = editorRowsToString(&len);
    int fd = open(E.filename,O_RDWR|O_CREAT,0644);
    if (fd == -1) goto writeerr;

    /* Use truncate + a single write(2) call in order to make saving
     * a bit safer, under the limits of what we can do in a small editor. */
    if (ftruncate(fd,len) == -1) goto writeerr;
    if (write(fd,buf,len) != len) goto writeerr;

    close(fd);
    free(buf);
    E.dirty = 0;
    editorSetStatusMessage("%d bytes written on disk", len);
    return 0;

writeerr:
    free(buf);
    if (fd != -1) close(fd);
    editorSetStatusMessage("Can't save! I/O error: %s",strerror(errno));
    return 1;
}

/* ============================= Terminal update ============================ */
/* We define a very simple "append buffer" structure, that is an heap
 * allocated string where we can append to. This is useful in order to
 * write all the escape sequences in a buffer and flush them to the standard
 * output in a single call, to avoid flickering effects. */
struct abuf {
    char *b;
    int len;
};

#define ABUF_INIT {NULL,0}

void abAppend(struct abuf *ab, const char *s, int len) {
    char *new = realloc(ab->b,ab->len+len);

    if (new == NULL) return;
    memcpy(new+ab->len,s,len);
    ab->b = new;
    ab->len += len;
}

void abFree(struct abuf *ab) {
    free(ab->b);
}

/* This function writes the whole screen using VT100 escape characters
 * starting from the logical state of the editor in the global state 'E'. */
void editorRefreshScreen(void) {
    int y;
    erow *r;
    char buf[32];
    struct abuf ab = ABUF_INIT;

    abAppend(&ab,"\x1b[?25l",6); /* Hide cursor. */
    abAppend(&ab,"\x1b[H",3); /* Go home. */
    for (y = 0; y < E.screenrows; y++) {
        int filerow = E.rowoff+y;

        if (filerow >= E.numrows) {
            if (E.numrows == 0 && y == E.screenrows/3) {
                char welcome[80];
                int welcomelen = snprintf(welcome,sizeof(welcome),
                    "Kilo editor -- verison %s\x1b[0K\r\n", KILO_VERSION);
                int padding = (E.screencols-welcomelen)/2;
                if (padding) {
                    abAppend(&ab,"~",1);
                    padding--;
                }
                while(padding--) abAppend(&ab," ",1);
                abAppend(&ab,welcome,welcomelen);
            } else {
                abAppend(&ab,"~\x1b[0K\r\n",7);
            }
            continue;
        }

        r = &E.row[filerow];

        int len = r->rsize - E.coloff;
        int current_color = -1;
        if (len > 0) {
            if (len > E.screencols) len = E.screencols;
            char *c = r->render+E.coloff;
            unsigned char *hl = r->hl+E.coloff;
            int j;
            for (j = 0; j < len; j++) {
                if (hl[j] == HL_NONPRINT) {
                    char sym;
                    abAppend(&ab,"\x1b[7m",4);
                    if (c[j] <= 26)
                        sym = '@'+c[j];
                    else
                        sym = '?';
                    abAppend(&ab,&sym,1);
                    abAppend(&ab,"\x1b[0m",4);
                } else if (hl[j] == HL_NORMAL) {
                    if (current_color != -1) {
                        abAppend(&ab,"\x1b[39m",5);
                        current_color = -1;
                    }
                    abAppend(&ab,c+j,1);
                } else {
                    int color = editorSyntaxToColor(hl[j]);
                    if (color != current_color) {
                        char buf[16];
                        int clen = snprintf(buf,sizeof(buf),"\x1b[%dm",color);
                        current_color = color;
                        abAppend(&ab,buf,clen);
                    }
                    abAppend(&ab,c+j,1);
                }
            }
        }
        abAppend(&ab,"\x1b[39m",5);
        abAppend(&ab,"\x1b[0K",4);
        abAppend(&ab,"\r\n",2);
    }

    /* Create a two rows status. First row: */
    abAppend(&ab,"\x1b[0K",4);
    abAppend(&ab,"\x1b[7m",4);
    char status[80], rstatus[80];
    int len = snprintf(status, sizeof(status), "%.20s - %d lines %s",
        E.filename, E.numrows, E.dirty ? "(modified)" : "");
    int rlen = snprintf(rstatus, sizeof(rstatus),
        "%d/%d",E.rowoff+E.cy+1,E.numrows);
    if (len > E.screencols) len = E.screencols;
    abAppend(&ab,status,len);
    while(len < E.screencols) {
        if (E.screencols - len == rlen) {
            abAppend(&ab,rstatus,rlen);
            break;
        } else {
            abAppend(&ab," ",1);
            len++;
        }
    }
    abAppend(&ab,"\x1b[0m\r\n",6);

    /* Second row depends on E.statusmsg and the status message update time. */
    abAppend(&ab,"\x1b[0K",4);
    int msglen = strlen(E.statusmsg);
    if (msglen && time(NULL)-E.statusmsg_time < 5)
        abAppend(&ab,E.statusmsg,msglen <= E.screencols ? msglen : E.screencols);

    /* Put cursor at its current position. Note that the horizontal position
     * at which the cursor is displayed may be different compared to 'E.cx'
     * because of TABs. */
    int j;
    int cx = 1;
    int filerow = E.rowoff+E.cy;
    erow *row = (filerow >= E.numrows) ? NULL : &E.row[filerow];
    if (row) {
        for (j = E.coloff; j < (E.cx+E.coloff); j++) {
            if (j < row->size && row->chars[j] == TAB) cx += 7-((cx)%8);
            cx++;
        }
    }
    snprintf(buf,sizeof(buf),"\x1b[%d;%dH",E.cy+1,cx);
    abAppend(&ab,buf,strlen(buf));
    abAppend(&ab,"\x1b[?25h",6); /* Show cursor. */
    write(STDOUT_FILENO,ab.b,ab.len);
    abFree(&ab);
}

/* Set an editor status message for the second line of the status, at the
 * end of the screen. */
void editorSetStatusMessage(const char *fmt, ...) {
    va_list ap;
    va_start(ap,fmt);
    vsnprintf(E.statusmsg,sizeof(E.statusmsg),fmt,ap);
    va_end(ap);
    E.statusmsg_time = time(NULL);
}

/* =============================== Find mode ================================ */

#define KILO_QUERY_LEN 256

void editorFind(int fd) {
    char query[KILO_QUERY_LEN+1] = {0};
    int qlen = 0;
    int last_match = -1; /* Last line where a match was found. -1 for none. */
    int find_next = 0; /* if 1 search next, if -1 search prev. */
    int saved_hl_line = -1;  /* No saved HL */
    char *saved_hl = NULL;

#define FIND_RESTORE_HL do { \
    if (saved_hl) { \
        memcpy(E.row[saved_hl_line].hl,saved_hl, E.row[saved_hl_line].rsize); \
        free(saved_hl); \
        saved_hl = NULL; \
    } \
} while (0)

    /* Save the cursor position in order to restore it later. */
    int saved_cx = E.cx, saved_cy = E.cy;
    int saved_coloff = E.coloff, saved_rowoff = E.rowoff;

    while(1) {
        editorSetStatusMessage(
            "Search: %s (Use ESC/Arrows/Enter)", query);
        editorRefreshScreen();

        int c = editorReadKey(fd);
        if (c == DEL_KEY || c == CTRL_H || c == BACKSPACE) {
            if (qlen != 0) query[--qlen] = '\0';
            last_match = -1;
        } else if (c == ESC || c == ENTER) {
            if (c == ESC) {
                E.cx = saved_cx; E.cy = saved_cy;
                E.coloff = saved_coloff; E.rowoff = saved_rowoff;
            }
            FIND_RESTORE_HL;
            editorSetStatusMessage("");
            return;
        } else if (c == ARROW_RIGHT || c == ARROW_DOWN) {
            find_next = 1;
        } else if (c == ARROW_LEFT || c == ARROW_UP) {
            find_next = -1;
        } else if (isprint(c)) {
            if (qlen < KILO_QUERY_LEN) {
                query[qlen++] = c;
                query[qlen] = '\0';
                last_match = -1;
            }
        }

        /* Search occurrence. */
        if (last_match == -1) find_next = 1;
        if (find_next) {
            char *match = NULL;
            int match_offset = 0;
            int i, current = last_match;

            for (i = 0; i < E.numrows; i++) {
                current += find_next;
                if (current == -1) current = E.numrows-1;
                else if (current == E.numrows) current = 0;
                match = strstr(E.row[current].render,query);
                if (match) {
                    match_offset = match-E.row[current].render;
                    break;
                }
            }
            find_next = 0;

            /* Highlight */
            FIND_RESTORE_HL;

            if (match) {
                erow *row = &E.row[current];
                last_match = current;
                if (row->hl) {
                    saved_hl_line = current;
                    saved_hl = malloc(row->rsize);
                    memcpy(saved_hl,row->hl,row->rsize);
                    memset(row->hl+match_offset,HL_MATCH,qlen);
                }
                E.cy = 0;
                E.cx = match_offset;
                E.rowoff = current;
                E.coloff = 0;
                /* Scroll horizontally as needed. */
                if (E.cx > E.screencols) {
                    int diff = E.cx - E.screencols;
                    E.cx -= diff;
                    E.coloff += diff;
                }
            }
        }
    }
}

/* ========================= Editor events handling  ======================== */

/* Handle cursor position change because arrow keys were pressed. */
void editorMoveCursor(int key) {
    int filerow = E.rowoff+E.cy;
    int filecol = E.coloff+E.cx;
    int rowlen;
    erow *row = (filerow >= E.numrows) ? NULL : &E.row[filerow];

    switch(key) {
    case ARROW_LEFT:
        if (E.cx == 0) {
            if (E.coloff) {
                E.coloff--;
            } else {
                if (filerow > 0) {
                    E.cy--;
                    E.cx = E.row[filerow-1].size;
                    if (E.cx > E.screencols-1) {
                        E.coloff = E.cx-E.screencols+1;
                        E.cx = E.screencols-1;
                    }
                }
            }
        } else {
            E.cx -= 1;
        }
        break;
    case ARROW_RIGHT:
        if (row && filecol < row->size) {
            if (E.cx == E.screencols-1) {
                E.coloff++;
            } else {
                E.cx += 1;
            }
        } else if (row && filecol == row->size) {
            E.cx = 0;
            E.coloff = 0;
            if (E.cy == E.screenrows-1) {
                E.rowoff++;
            } else {
                E.cy += 1;
            }
        }
        break;
    case ARROW_UP:
        if (E.cy == 0) {
            if (E.rowoff) E.rowoff--;
        } else {
            E.cy -= 1;
        }
        break;
    case ARROW_DOWN:
        if (filerow < E.numrows) {
            if (E.cy == E.screenrows-1) {
                E.rowoff++;
            } else {
                E.cy += 1;
            }
        }
        break;
    }
    /* Fix cx if the current line has not enough chars. */
    filerow = E.rowoff+E.cy;
    filecol = E.coloff+E.cx;
    row = (filerow >= E.numrows) ? NULL : &E.row[filerow];
    rowlen = row ? row->size : 0;
    if (filecol > rowlen) {
        E.cx -= filecol-rowlen;
        if (E.cx < 0) {
            E.coloff += E.cx;
            E.cx = 0;
        }
    }
}

/* Process events arriving from the standard input, which is, the user
 * is typing stuff on the terminal. */
void editorProcessKeypress(int fd) {
    int c = editorReadKey(fd);
    switch(c) {
    case ENTER:         /* Enter */
        editorInsertNewline();
        break;
    case CTRL_C:        /* Ctrl-c */
        /* We ignore ctrl-c, it can't be so simple to lose the changes
         * to the edited file. */
        break;
    case CTRL_Q:        /* Ctrl-q */
		if (!fork()){
			char *args[] = {"clear", NULL};
			execvp("clear", args); // Kills child
		}
		wait(NULL); // Wait on child
        //pthread_kill(read_thread, SIGINT); //this ended up making it break faster
        close(serverFd);
        exit(EXIT_SUCCESS);
        break;
    case CTRL_S:        /* Ctrl-s */
        //editorSave();
        break;
    case CTRL_F:
        editorFind(fd);
        break;
    case BACKSPACE:     /* Backspace */
    case CTRL_H:        /* Ctrl-h */
    case DEL_KEY:
        editorDelChar();
        break;
    case PAGE_UP:
    case PAGE_DOWN:
        if (c == PAGE_UP && E.cy != 0)
            E.cy = 0;
        else if (c == PAGE_DOWN && E.cy != E.screenrows-1)
            E.cy = E.screenrows-1;
        {
        int times = E.screenrows;
        while(times--)
            editorMoveCursor(c == PAGE_UP ? ARROW_UP:
                                            ARROW_DOWN);
        }
        break;

    case ARROW_UP:
    case ARROW_DOWN:
    case ARROW_LEFT:
    case ARROW_RIGHT:
        editorMoveCursor(c);
        break;
    case CTRL_L: /* ctrl+l, clear screen */
        /* Just refresht the line as side effect. */
        break;
    case ESC:
        /* Nothing to do for ESC in this mode. */
        break;
    default:
        editorInsertChar(c);
        break;
    }
}

int editorFileWasModified(void) {
    return E.dirty;
}

void updateWindowSize(void) {
    if (getWindowSize(STDIN_FILENO,STDOUT_FILENO,
                      &E.screenrows,&E.screencols) == -1) {
        perror("Unable to query the screen for size (columns / rows)");
        exit(EXIT_FAILURE);
    }
    E.screenrows -= 2; /* Get room for status bar. */
}

void handleSigWinCh(int unused __attribute__((unused))) {
    updateWindowSize();
    if (E.cy > E.screenrows) E.cy = E.screenrows - 1;
    if (E.cx > E.screencols) E.cx = E.screencols - 1;
    editorRefreshScreen();
}

void initEditor(void) {
    E.cx = 0;
    E.cy = 0;
    E.rowoff = 0;
    E.coloff = 0;
    E.numrows = 0;
    E.row = NULL;
    E.dirty = 0;
    E.filename = NULL;
    E.syntax = NULL;
    updateWindowSize();
    signal(SIGWINCH, handleSigWinCh);
}

/* ========================= Communication with Server ======================== */

void receiveFile(){
	ssize_t n;
	FILE *file = fopen(filename, "w");
	char buffer[MSGSIZE];

	n = read(serverFd, buffer, MSGSIZE);
	buffer[n] = '\0';

	while (1){
		if ((n = read(serverFd, buffer, MSGSIZE)) > 0){
			buffer[n] = '\0';
			if (!strcmp(buffer, "End Transfer")){
				printf("Closing\n");
				fclose(file);
				return;
			}
			fprintf(file, "%s\n", buffer);
			send(serverFd, "ACK", MSGSIZE, 0);
		}
	}
}

void handle_server_message(char *msg){
    char cmd[MSGSIZE], arg1[MSGSIZE], arg2[MSGSIZE], arg3[MSGSIZE];
    int i, j;

    //initialize strings
    cmd[0] = arg1[0] = arg2[0] = arg3[0] = '\0';
    
    /*-- tokenize --*/
    //get command
    for(i = 0, j = 0; i < MSGSIZE; ++i, ++j){
        //stop when we encounter colon or null
        if(msg[i] == ':' || msg[i] == '\0'){break;}
        cmd[j] = msg[i];
    }
    cmd[j] = '\0';
    //get arg1
    for(i = i+1, j = 0; i < MSGSIZE; ++i, ++j){
        //stop when we encounter colon or null
        if(msg[i] == ':' || msg[i] == '\0'){break;}
        arg1[j] = msg[i];
    }
    arg1[j] = '\0';
    //get arg2
    for(i = i+1, j = 0; i < MSGSIZE; ++i, ++j){
        //stop when we encounter colon or null
        if(msg[i] == ':' || msg[i] == '\0'){break;}
        arg2[j] = msg[i];
    }
    arg2[j] = '\0';
    //get arg3
    //Note: sometimes arg3 contains garbage data
    for(i = i+1, j = 0; i < MSGSIZE; ++i, ++j){
        //stop when we encounter colon or null
        if(msg[i] == ':' || msg[i] == '\0'){break;}
        arg3[j] = msg[i];
    }
    arg3[j] = '\0';

    if(strcmp(cmd, "dc") == 0){
        int row_index = atoi(arg1);
        erow * row = E.row + row_index;
        int char_index = atoi(arg2);
        editorRowDelChar(row, char_index, false);
        editorUpdateRow(row);
    }
    else if(strcmp(cmd, "as") == 0){
        int row_index = atoi(arg1);
        erow * row = E.row + row_index;
        char * new_string = arg2;
        if(new_string[0] != '\0'){
            editorRowAppendString(row, new_string, strlen(new_string), false);
            editorUpdateRow(row);
        }
    }
    else if(strcmp(cmd, "ic") == 0){
        int row_index = atoi(arg1);
        erow * row = E.row + row_index;
        int char_index = atoi(arg2);
        char new_char = arg3[0];
        editorRowInsertChar(row, char_index, new_char, false);
        editorUpdateRow(row);
    }
    else if(strcmp(cmd, "dr") == 0){
        int row_index = atoi(arg1);
        editorDelRow(row_index, false);
    }
    else if(strcmp(cmd, "ir") == 0){
        int row_index = atoi(arg1);
        erow * row = E.row + row_index;
        char * new_string = arg2;
        editorInsertRow(row_index, new_string, strlen(new_string), false);
        editorUpdateRow(row);
    }

    editorRefreshScreen();
}

void *read_server_messages(){
    char buffer[MSGSIZE];
    int n;

    pthread_detach(pthread_self());

    while((n = read(serverFd, buffer, MSGSIZE)) != 0){
        buffer[n] = '\0';

        handle_server_message(buffer);
    }

	if (!fork()){
		char *args[] = {"clear", NULL};
		execvp("clear", args); // Kills child
	}
	wait(NULL); // Wait on child
    close(serverFd);
    editorAtExit();
	printf("Server crashed.\n");
    exit(EXIT_FAILURE);
}

/* ============================= Main Program ================================== */

//main program of text-editor client
int main(int argc, char **argv) {
	//check command-line args
    if (argc != 4) {
        fprintf(stderr,"Usage: kilo <host> <port> <filename>\n");
        exit(EXIT_FAILURE);
    }

    //setup
	struct addrinfo hints, *res, *traverser;
	memset(&hints, 0, sizeof(struct addrinfo));
	hints.ai_family = AF_UNSPEC;
	hints.ai_socktype = SOCK_STREAM;
	int r = getaddrinfo(argv[1], argv[2], &hints, &res);
	if (r != 0){
		fprintf(stderr,"Error: Can't find server.\n");
		return 1;
	}

	// Try addresses until one is successful
	for (traverser = res; traverser; traverser = traverser->ai_next){
		if ((serverFd = socket(traverser->ai_family, traverser->ai_socktype, traverser->ai_protocol)) != -1){
			if ((connect(serverFd, traverser->ai_addr, traverser->ai_addrlen)) == 0){
				break;
			}
		}
	}
	printf("Connected\n");

    sprintf(filename, "transfer%s", argv[3]); //get transfer file name
    
    char fileGetter[128] = "get ";
    strncat(fileGetter, argv[3], 123);
    fileGetter[127] = '\n';
    send(serverFd, fileGetter, 1024, 0);
    receiveFile();

    //create thread for reading server messages
    int i;
    if ((i = pthread_create(&read_thread, NULL, read_server_messages, (void*)NULL)) != 0) {
        printf("thread creation failed\n");
    }
    
    
    //start editor
	initEditor();
    editorSelectSyntaxHighlight(filename);
    editorOpen(filename);
    enableRawMode(STDIN_FILENO);
    editorSetStatusMessage(
        "HELP: Ctrl-Q = quit | Ctrl-F = find");
    while(1) {
        editorRefreshScreen();
        editorProcessKeypress(STDIN_FILENO);
    }

    return 0;
}