Facet hung issuing corrections to Rtk2go and Emlid simultaneously

[amlago]

Facet hung issuing corrections to Rtk2go and Emlid simultaneously

facet v4.1 06/14/24
I was working today with Facet in base mode for a little over 5 hours, issuing corrections to Rtk2go and Emlid at the same time. I also saved the ubx file on the SD card and when that period of 5 hours of work more or less arrived, it crashed. It stopped issuing corrections, the screen remained frozen with a fixed rtcm number without advancing.
It didn't turn off normally and I had to hold the power button for 20 seconds and it turned off.
Could it be a ram problem due to the double emission and saving of the ubx file on the SD card?
The Wi-Fi in the work area is excellent and the battery was over 60 percent.
I leave the problem to your analysis.
greetings

[PaulZC]

Hi Angel (@amlago ),

Many apologies for the slow reply.

It might be a RAM problem, the double NTRIP connection does use more RAM. I will try and replicate this here, and capture the crash.

Greetings from the UK,
Paul

[skyviewaerials]

I ran into the same issue on a very hot day here in Los Angeles, temps passing 100*F I removed the rubber sleeve to reduce the heat being absorbed by the Facet. I finally decided to cover the unit with a white plastic shopping bag, just covering it and poking a hole in the top to vent the heat.