A post processor to make life easier with Cube 2 from 3DSystems. Support KISSlicer 1.5b, Cura 15.04.04 and Slic3r 1.2.9. With all slicer g-code, it cleans the file after processing (removes comments and extra lines, makes sure EOL is Windows) With KISS
- allows for solid and infill extrusion amount tuning With Cura
- changes first layer temp 10 C higher than rest of the print With Slicer
- converts Makerware (Makerbot) style g-code to Cube (BfB) format Disclaimer: i'm not responsible if anything, good or bad, happens due to use of this script.
Version 0.8: No longer relies on the much slower CodeX software.
cubifier [-h] [-k] [-d] filename
positional arguments:
filename
optional arguments:
-h, --help show this help message and exit
-k, --keep keep intermediary bfb file
-d, --debug enable debugging mode
cube-utils is a set utility functions (originally by fritzw) for encoding a .bfb file as a .cube{x|pro} file using blowfish.
git clone https://github.com/devincody/cube-utils
cd cube-utils
make
make install
git clone https://github.com/devincody/CubePostprocessor
cd CubePostprocessor
python setup.py install