Skip to content

Latest commit

 

History

History
89 lines (69 loc) · 2.51 KB

README.md

File metadata and controls

89 lines (69 loc) · 2.51 KB
Raw

SmartPark

Setup script for Installing clean SmartParks stack on RockPi 4.

Hardware:

  • RockPI 4b
  • sD card 64 GB
  • Kingston A2000 250GB NVMe SSD
  • LB Link Wifi dongle
  • Lorix Wifx gateway 4db antenna

Configures:

  • Pi as accespoint over built-in wireless interface (with DHCP)
  • Uses External wireless interfaces for internet connection
  • Ethernet wired interface as 192.168.1.1 for communication with Lorix gateway

Software:

  • Hostapd
  • NTP
  • DNSMASQ
  • Mosquitto
  • Redis
  • Postgresql
  • Chirpstack gateway bridge
  • Chirpstack network server
  • Chirpstack application server
  • InfluxDB
  • Node-red

To do:

  • Configure Chripstack using API calls
  • Configure Node-red

Step 1: Download image

Download Armbian image from https://dl.armbian.com/rockpi-4b/Buster_current or choose another image from https://www.armbian.com/rock-pi-4/
I use Buster Server kernel 5.4

Step 2: Write image

Write image to SD card using Balena Etcher

Step 3: Boot PI and innitial config

Boot RockPI, find IP address on your router or by using NMAP nmap -T4 -F 192.168.178.0/24
Change Root password
Make new user

Step 4: Install Git

Install git using sudo apt-get update && sudo apt-get install git

Step 5: Clone repo

Clone repo using git clone https://github.com/tfranssen/SmartPark

Step 6: Configure and run script

Configure Wifi AP PAssword, SSID, JWT_secret and database passwords to your liking
Run script using sudo bash ./SmartPark/setup.sh
Run through node-red script

Done

You can connect to the RockPI using wifi on SSID SmartParks.
Default ip-address is 10.0.0.1

Lora Application server 10.0.0.1:8080
Node-red 10.0.0.1:1880

Configure Chripstack using Postman

Import collection from https://www.getpostman.com/collections/c84e5a7326cb25e768aa
Log in in Chirpstack Username: admin password:admin
Change password
Create API key in Chirpstack and copy to clipboard
Copy key in Collection Authorization tab (Right click on Collection, Authoriztion, Bearer token, paste key)
Set Base-URL in Variables (Right click on Collection, Variables, Base-URL, paste ip @ current value)
Click on Run Colletion and click Run (Collection runner opens)
Click Run SmartParks

Configure Node-red

Install packages (manage palette):

  • influxdb
  • wordlmap
  • node-red-dashboard
  • ui_table

Import flows: https://flows.nodered.org/collection/t-mAbk3CoowS

Check application ID Check Mqtt node (default port 1883) Add influxdb connection node (default username: nodered password: nodered)