MEAS MS5611 pressure sensor library for altitude / variometer applications, uses floating point for better resolution

ArduPlane, ArduCopter, ArduRover source

Basic altimeter/variometer that fuses accelerometer and barometric sensor data to minimize response lag.

MS5611-01BA03 Barometric Pressure Sensor Driver

reading ms561101ba sensors on raspberry pi

Universeller Jeti Telemetrie Sensor mit Vario - GPS - Strom - Spannung - Temperatur

RaspberryPilot

Forth words for ms5611 high resolution pressure sensor on i2c

no_std driver for the MS5611 (barometric pressure sensor)

A Rust library for the MS5611 barometric pressure sensor.

Library for the MS5611 barometric pressure sensor using SPI

A demo to read and send pressure data in STM32. Pressure data is read from MS5611, and sent by bluetooth module BT05.

A demo to receive and draw real-time pressure data in Raspberry Pi by bluetooth.

vSpeed Vario - DIY Paragliding Variometer

Flight controller firmware.

A bluetooth audio vario with zero-lag climb/sink rate feedback. Configurable and firmware upgradable via WiFi. Uses off-the-shelf modules. Schematic and PCB layout provided.

Easy to use STM32 development environment based on opensource tools

Arduino Library with examples for using digital pressure sensors MS5607 (and MS56xx, MS57xx, MS58xx) based on AN520 by manufacturer.

MicroPython Driver for the TE MS5611 Pressure and Temperature Sensor

ESP32 driver for MS5803 and MS5611 sensor families under native ESP-IDF framework. No arduino garbage-code!