FAQ.Massive.txt

#!/bin/cat
$Id: FAQ.Massive.txt,v 1.30 2019/07/24 12:01:41 gilles Exp gilles $

This document is also available online at
https://imapsync.lamiral.info/FAQ.d/
https://imapsync.lamiral.info/FAQ.d/FAQ.Massive.txt


=======================================================================
              Imapsync tips for massive/bulk migrations.
=======================================================================

Questions answered here are:

Q. How long will take the whole migration?

Q. I need to migrate hundred accounts, how can I do?

Q. I have to migrate 500k users using 400 TB of disk space. 
   How do I proceed? How about speed?

Q. How to determine where is the bottleneck in an imapsync process?

Q. Can I run several instances of imapsync in parallel on a Windows host?

Q. I run multiple imapsync applications at the same time then get a
   warning "imapsync.pid already exists, overwriting it".
   Is this a potential problem when trying to sync multiple 
   IMAP account in parallel?

=======================================================================
Q. How long will take the whole migration? 

R1. First you have to consider several periods. There is the global 
    period, from when the migration process is decided to the final end
    where all mailboxes are migrated. This global period can be divided
    into three smaller periods.
    
    The first period is the analyse period: you play with the tools 
    available, you estimate the volume to be transferred, the number of
    accounts, you measure how long it takes for one account under
    your context.
    
    The second period is the presync period. The users are still using
    the old accounts but nothing prevents you from starting to sync
    the old accounts, as they are, to the new accounts.
    With tons of gigabytes to transfer, this period may be the longest one. 
    There is nothing more than launching the presyncs and monitoring them 
    until the round is finished.
    
    The last period is the final sync period where only the last 
    changes of the mailboxes need to be synced in order to switch
    the users to their new mailboxes.

R2. To estimate the presync period, consider the mean imapsync transfer
    rate to be around 340 Kbytes/s, ie, 2.8 Mbps, no matter the local 
    link bandwidth.
    It's a mean, measured upon various different syncs, coming from 
    the online service /X where the network card flow rate is 100 Mbps 
    and the provider bandwidth is also 100 Mbps. Max seen is a transfer 
    at 21 Mbps.
   
    At 340 Kbytes/s,
    1 TB to transfer and one sync at a time will end in 35 days (1024^3/340/3600/24).
    At  10 transfers at a time, 1 TB will take 3.5 days.
    At 100 transfers at a time, 1 TB will take 8 hours.
    Double the time because the best scenario never happens.
    Triple the time because, well, real world is like that.

R3. To estimate the last period, just rerun a complete presync,
    ie, resync all the mailboxes, the final sync should take 
    the same amount of time.
    
=======================================================================
Q. I need to migrate hundred accounts, how can I do?

R. If you have many mailboxes to migrate, think about a little
script program. Write a file called file.txt (for example)
containing hosts, users and passwords on both sides.
The separator used in this example is ";"

The file.txt file contains for example:

host001_1;user001_1;password001_1;host001_2;user001_2;password001_2;
host002_1;user002_1;password002_1;host002_2;user002_2;password002_2;
host003_1;user003_1;password003_1;host003_2;user003_2;password003_2;
host004_1;user004_1;password004_1;host004_2;user004_2;password004_2;
etc.

Most of the times, the first column (host001_1, host002_1 ...) will
contains the same value, the value of --host1 parameter. Same
thing for the third column (host001_2, host002_2).

On Unix the shell script can be:

#!/bin/sh
{ while IFS=';' read  h1 u1 p1 h2 u2 p2 fake
    do 
        imapsync --host1 "$h1" --user1 "$u1" --password1 "$p1" \
                 --host2 "$h2" --user2 "$u2" --password2 "$p2" "$@" 
    done 
} < file.txt

You can add extra options inside this script, just after the variable "$@".
You can also pass extra options via the parameters of this script 
since they will go in "$@"

Here is a complete Unix example ready to use: 
http://imapsync.lamiral.info/examples/sync_loop_unix.sh


On Windows the batch script can be:

CD /D %~dp0
SET csvfile=file.txt
FOR /F "tokens=1,2,3,4,5,6,7 delims=; eol=#" %%G IN (%csvfile%) DO (
imapsync ^
  --host1 %%G --user1 %%H --password1 %%I ^
  --host2 %%J --user2 %%K --password2 %%L %%M  ...
)

You can add extra options inside this script, just after the variable %%M.
You can add extra options inside the file.txt, in the last column. Add 
an extra semicolon at the end (optional)
Example:
host001_1;user001_1;password001_1;host001_2;user001_2;password001_2;
host002_1;user002_1;password002_1;host002_2;user002_2;password002_2;
becomes
host001_1;user001_1;password001_1;host001_2;user001_2;password001_2; --automap --addheader
host002_1;user002_1;password002_1;host002_2;user002_2;password002_2; --automap --addheader

With this solution, options can be added, changed or removed per account.
Technically those options will go in %%M in the loop body 

Here is a complete Windows example ready to use: 
http://imapsync.lamiral.info/examples/sync_loop_windows.bat

Another solution to add extra arguments is to write another .bat that 
calls sync_loop_windows.bat with the extra arguments, like this
for example:

  sync_loop_windows.bat --automap --addheader --maxmessagespersecond 4 

Technically those options will go in %arguments%  in the loop body
of sync_loop_windows.bat


=======================================================================
Q. I have to migrate 500k users using 400 TB of disk space. 
   How do I proceed? How about speed?

R. A good solution to this issue is two words: parallelism and measurements.  

Since all mailboxes are functionnaly independent, they can be processed 
independently, here comes the parallelism, ie, lunching several imapsync 
processes in parallel.

Meanwhile, mailboxes usually belong to the same server and the syncs
share the same imapsync host via the same bandwidth, here come 
some limitations and bottlenecks.

How many syncs can we run in parallel in your context?
Here comes some measurements.

1) Measure the total transfer rate by adding each one printed in each run.
   Since adding this way is not so easy, just look at the overall 
   network rate of the imapsync host.

   On Linux and FreeBSD, nload is a good candidate to measure this overall
   network rate. For example, to measure the rate every 6 seconds (-t 6000), 
   on eth0 or em0 interface, with values in Kbytes (-u K), use:
   
     nload -t 6000 eth0 -u K  # Linux
     nload -t 6000 em0  -u K  # FreeBSD

   On Linux only, another very good network tool is dstat:
   
     dstat -n -N eth0 6  # Linux only (in 2018)

   Another excellent tool to measure the network trafic is iftop.
   The following command will monitor imap and imaps connections
   on interfce eth0, only them, and sum them up:
   
     iftop -i eth0 -f 'port imap or port imaps' -B # Linux
     iftop -i em0  -f 'port imap or port imaps' -B # FreeBSD

   During iftop, press the h to see the display commands available, 
   every single feature is useful! Press h again and try each one.
   My preferred display combination is by typing
   t p >  
   meaning: one line per connection, show port numbers, sort by destination.


   On Windows 8.1 Windows 10 Windows 2012 R2 Windows 2016,
   get the overall network rate with the classical
   task manager (Ctrl-Shift-Esc), there is a Performance tab
   in it where resides a Network grap monitor.

   On Windows 7, get the overall network rate with the classical
   task manager (Ctrl-Shift-Esc), there is a Network tab in it.

   I'm looking for a free and simple tool on Windows that could 
   sum up only the imap traffic.

2) Launch new parallel runs, one by one, as long as the total 
   transfer rate increase.

3) When the total transfer rate starts to diminish, stop new launches. 
   Note N as the number of parallel runs you got until then.

4) Only keep N-2 parallel runs for the future.


=======================================================================
Q. How to determine where is the bottleneck in an imapsync process?

R1. Divide and conquer.

In order to detect whether host1/link1 is the bottleneck or
host2/link2, we have several tests to explore:

1) run a sync from host1 to host1, with a host1 test account as destination.
This way, only host1+link1 are tested, host2 is not directly concerned.
If performances increase a lot then host2/link2 is the bottleneck.

2) run a sync from host2 to host2, with a host2 test account as destination.
This way, only host2+link2 are tested, host1 is not concerned.
If performances increase a lot then host1/link1 is the bottleneck.

If performances increase on both tests 1) and 2), I have no clue to explain that.
Same thing if they both decrease! 

R2. Isolating and overcoming bottlenecks

On any process involving several mechanisms, among all elements taking
part on the process, there is always a bottleneck.  No one knows in
advance what is the first bottleneck. The first bottleneck has to be
determined, by measurements, not by guesses.  Once this first
bottleneck is known and overcome then the next bottleneck has to be
determined and overcome too, if needed. Repeat the process of looking
for the next bottleneck and its elimination until you estimate the
transfer rates, money costs, time spent on this, and final dates 
are good enough to proceed the whole huge migration.

Possible bottlenecks: 

- Throttles. 
  IMAP servers have artificial limits. 
  For example Gmail, Office365, Exchange have throttle limits.

- Bandwidth. 
  Usually available bandwidth is NOT a bottleneck.
  Meanwhile, it can be a bottleneck on small Internet connections.
  Imapsync downloads messages from host1 and upload messages to host2,
  consider this in case the connections are asymmetric.
  
- I/O on disks. 
  I/O are a classical bottleneck, almost always forgotten.
  Unlike CPU and RAM, Input/Output performances don't improve
  very much as time goes on so it's often a bottleneck.
  To measure and overcome an I/O disk bottleneck, you need 
  usually a direct access to host1 and host2.
  An I/O bottleneck where imapsync runs is possible if
  --usecache or --useuid is used or with very big messages.


- RAM memory.
  On all sides, monitor that your systems don't swap its 
  running processes on disk, because swapping running processes 
  on disks decreases performance by a factor of 20, at least.
  It's not because the swap memory is used that your
  system swaps processes on disk.

- CPU.
  100% CPU during a whole transfer means the system is busy.
  Usually CPU is not a problem with imapsync but it can be a problem
  with one of the imap servers.
  Most often CPU is not the real bottleneck, I/O are.

Other possible bottlenecks:
- Number of hosts available to run imapsync processes.
- Imapsync itself.
- Management of errors.
- MX domains, DNS.
- Incompetence.
- Money.
- Time.
- Bad luck.
- ...


=======================================================================
Q. Can I run several instances of imapsync in parallel on a Windows host?

R. Yes!

Q. Any performance issue?

You have to try and check the transfer rates, sum them up to
have a uniq numeric criteria. 
There is always a limit, depending on remote imap servers 
and the one running imapsync.
CPU, memory, Inputs/Outputs are the classical bottlenecks, 
the worst bottleneck is the winner that sets the limit.

examples/sync_loop_windows.bat says
...
REM ==== Parallel executions ====
REM If you want to do parallel runs of imapsync then this current script is a good start.
REM Just copy it several times and replace, on each copy, the csvfile variable value.
REM Instead of SET csvfile=file.txt write for example
REM SET csvfile=file01.txt in the first copy
REM then also 
REM SET csvfile=file02.txt in the second copy etc.
REM Of course you also have to split the data contained in file.txt
REM into file01.txt file02.txt etc.
REM After that, just double-click on each batch file to launch each process


=======================================================================
Q. I run multiple imapsync applications at the same time then get a
   warning "imapsync.pid already exists, overwriting it".
   Is this a potential problem when trying to sync multiple 
   IMAP account in parallel?

R1. No issue with the file imapsync.pid if you don't use its content
by yourself. 

This file can help you to manage multiple runs by sending signals 
to the processes (sigterm or sigkill) using their PID.
Each run can have its own pid file with --pidfile option.
The file imapsync.pid contains the PID of the current imapsync process.
This file is removed at the end of a normal run.
You can safely ignore the warning if you don't use imapsync.pid file
to manage imapsync processes.

=======================================================================
=======================================================================