You might want to follow one of these external resources to get an overview, but please still read carefully this page as some instructions may have evolved.
- ParrotOS: some further notes can be found at @5w0rdfish repo Proxmark Installation for Parrot OS
First what we want to do is get an update for the system. If you need to upgrade do this before the install. An upgrade was carried out prior to following these instructions.
Update the packages list
sudo apt-get updateInstall the requirements
sudo apt-get install --no-install-recommends git ca-certificates build-essential pkg-config \
libreadline-dev gcc-arm-none-eabi libnewlib-dev qtbase5-dev libbz2-dev libbluetooth-dev libpython3-devIf you don't need the native Bluetooth support in the client, you can skip the installation of libbluetooth-dev.
If you don't need the graphical components of the Proxmark3 client (such as in hw tune), you can skip the installation of qtbase5-dev.
If you don't need support for Python3 scripts in the Proxmark3 client, you can skip the installation of libpython3-dev.
If you get some (non blocking) error at runtime such as Gtk-Message: Failed to load module "canberra-gtk-module" you may have to install libcanberra-gtk-module.
sudo pacman -Sy git base-devel readline bzip2 arm-none-eabi-gcc arm-none-eabi-newlib qt5-base bluez python --neededIf you don't need the native Bluetooth support in the client, you can skip the installation of bluez.
If you don't need the graphical components of the Proxmark3 client (such as in hw tune), you can skip the installation of qt5-base.
If you don't need support for Python3 scripts in the Proxmark3 client, you can skip the installation of python.
sudo dnf install git make gcc gcc-c++ arm-none-eabi-gcc-cs arm-none-eabi-newlib readline-devel bzip2-devel qt5-qtbase-devel bluez-libs-devel python3-devel libatomicIf you don't need the native Bluetooth support in the client, you can skip the installation of bluez-libs-devel.
If you don't need the graphical components of the Proxmark3 client (such as in hw tune), you can skip the installation of qt5-qtbase-devel.
If you don't need support for Python3 scripts in the Proxmark3 client, you can skip the installation of python3-devel.
sudo zypper install git patterns-devel-base-devel_basis gcc-c++ readline-devel libbz2-devel cross-arm-none-gcc9 cross-arm-none-newlib-devel python3-devel libqt5-qtbase-develNote that Bluez is not available on openSUSE so the native Bluetooth support won't be available in the client.
If you don't need the graphical components of the Proxmark3 client (such as in hw tune), you can skip the installation of libqt5-qtbase-devel.
If you don't need support for Python3 scripts in the Proxmark3 client, you can skip the installation of python3-devel.
git clone https://github.com/RfidResearchGroup/proxmark3.gitmake sure ModemManager will not interfere, otherwise it could brick your Proxmark3! Read carefully this page about ModemManager and follow its instructions.
Check the proxmark is being picked up by your computer. Plug it in, then:
sudo dmesg | grep -i usbIt should show up as a CDC device:
usb 2-1.2: Product: PM3
usb 2-1.2: Manufacturer: proxmark.org
cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device
And a new /dev/ttyACM0 should have appeared.
Add current user to the proper group to get permission to use /dev/ttyACM0.
This step can be done from the RRG/Iceman Proxmark3 repo with:
make accessrightsThen, you need to logout and login in again for your new group membership to be fully effective.
To test you have the proper read & write rights, plug the Proxmark3 and execute:
[ -r /dev/ttyACM0 ] && [ -w /dev/ttyACM0 ] && echo okIt must return ok. Otherwise this means you've got a permission problem to fix.
Now you're ready to follow the compilation instructions.