UNO IP Arm Home or Night through Home Assistant sends Arm Away to board

[copperlab]

When I issue an arm home or arm night command from HA it always actually goes into home away on the UNO IP system.

I am not sure if this is one of the features that has not been added yet. Other than that seems to be working great.

[ufodone]

Yes, this was a current limitation of the UNO's TPI interface when I originally added support for it. I've not seen any firmware release notes indicating updates yet but I've sent a note off to enquire if/when additional features are coming.

[copperlab]

I reached out to eyezon about tpi interface. They said that is controlled by the manufacturer which is Envisacor. To me it looks like they are the same company. I can help ask for whatever you need, but I just don't know exactly what would be helpful for you. Thanks.

[ufodone]

Yes, it is Envisacor I've contacted. I know they had plans to add a bunch more functionality but don't know a timeline on it at the moment.

[copperlab]

I also reached out on the eyezon forum about new TPI documentation. The support person I talked to at eyezon says they do answer questions on their forum. Let me know if you get a response. Thanks.

[copperlab]

Any response from envisavor?

[ufodone]

They are just working on updated documentation and will send me a copy when it is complete. It sounds like that will be relatively soon. This should capture additional capabilities they are adding. Based on previous conversations I've had with them, I suspect these updates will have the ability to arm in different modes.

[deliverer33]

not sure if it helps the cause or not, but you can arm "home" from the eyezon web interface. does that help to gather what is needed to update the code?

[copperlab]

any updates on this?

[ufodone]

@copperlab No, I haven't heard anything back from Envisacor yet.

@deliverer33 Unfortunately the interface used by this integration does not have the same capabilities as what has been made available on the web interface. So it's just a matter of waiting until they release firmware and documentation with the additional capabilities.

[copperlab]

I see a new firmware was released. Did this come with what you were looking for?

[tamorgen]

Any updates? I'm unable to arm in night or home mode through HAAS on my UNO IP hybrid system.

[copperlab]

There is another new update that was released today. Also have a thread on the eyezon forum to try to get the attention of the manufacturer: https://forum.eyezon.com/viewtopic.php?t=5442&sid=11530eabfa0b5339462928e48ea92731

[tamorgen]

There is another new update that was released today. Also have a thread on the eyezon forum to try to get the attention of the manufacturer: https://forum.eyezon.com/viewtopic.php?t=5442&sid=11530eabfa0b5339462928e48ea92731

I just updated to 117 this morning, and it still tries to arm away when trying night or home

[ufodone]

I spoke with Envisacor and the released firmware versions do not yet include the TPI changes needed. While I don't have an ETA, they are actively work on the required changes.

[tamorgen]

I spoke with Envisacor and the released firmware versions do not yet include the TPI changes needed. While I don't have an ETA, they are actively work on the required changes.

Well, that is at least something. They are acknowledging there is an issue. The firmware updates seem to be somewhat regular, so hopefully they'll get this sorted out. Until then, I'll need to arm my system manually.

[ufodone]

Well, that is at least something. They are acknowledging there is an issue.

They've actually been very responsive with me and very receptive to adding features to the TPI. Development sometimes just takes time and I'm sure they have many competing priorities to juggle.

[tamorgen]

Well, that is at least something. They are acknowledging there is an issue.

They've actually been very responsive with me and very receptive to adding features to the TPI. Development sometimes just takes time and I'm sure they have many competing priorities to juggle.

Okay, that's good to hear. I guess reading the entire thread, it didn't seem like they were entirely responsive at first. Then again, that was 2 months ago with a limited number of responses.

[DineshChr]

I updated my Uno panel with the recent beta version and now Arm_stay (home) works. I updated home assistant with the current beta version, restarted HA and Waited for about 6 Hrs and now both Arm_away and Arm_stay functions are working in Apple HomeKit.