Skip to content

Control

Jump to bottom
Vladimir Mandic edited this page Dec 19, 2023 · 33 revisions

Control

Native control module for SD.Next for Diffusers backend
Can be used for generation Control as well as Image and Text workflows

Install

Final release

For final release, Control will be part of SD.Next itself

Pre-release

  • Make sure you're using latest SD.Next from DEV branch

    git checkout dev
    git pull

  • Clone Control into extensions folder

    cd extensions
    git clone https://github.com/vladmandic/control

  • Make sure you're running latest version of Control

    cd extensions/control
    git pull

  • Make sure you enable extra logging as described below
  • Yes, you need to be in backend=diffusers
  • Any issues should be reported on SD.Next Discord server in a dedicated channel
    https://discord.com/channels/1101998836328697867/1186383781066719322
    Do not create GitHub issues for pre-release versions
  • Note: ControlNet-XS support requires diffusers 0.25.dev from latest main branch

Supported Control Models

  • lllyasviel ControlNet for SD 1.5 and SD-XL models
    Includes ControlNets as well as Reference-only mode and any compatible 3rd party models
    Original ControlNets for SD15 are 1.4GB each and for SDXL its at massive 4.9GB
  • VisLearn ControlNet XS for SD 1.5 and SD-XL models
    Lightweight ControlNet models for SDXL at 165MB only with near-identical results
  • TencentARC T2I-Adapter for SD 1.5 and SD-XL models
    Adapters provide similar functionality at much lower resource cost at only 300MB each
  • CiaraRowles TemporalNet for SD 1.5 models

All built-in models are downloaded upon first use and stored stored in /models/controlnets, /models/adapters, /models/processors

Listed below are all models that are supported out-of-the-box:

ControlNet

  • SD15:
    Canny, Depth, IP2P, LineArt, LineArt Anime, MLDS, NormalBae, OpenPose,
    Scribble, Segment, Shuffle, SoftEdge, TemporalNet, HED, Tile
  • SDXL:
    Canny Small XL, Canny Mid XL, Canny XL, Depth Zoe XL, Depth Mid XL

Note: only models compatible with currently loaded base model are listed
Additional ControlNet models in safetensors can be downloaded manually and placed into /models/controlnets

ControlNet XS

  • SDXL:
    Canny, Depth

T2I-Adapter

  • SD15:
    Canny, Depth, Depth Zoe, OpenPose, Sketch
  • SDXL:
    Canny XL, Depth Zoe XL, Depth Midas XL, LineArt XL, OpenPose XL, Sketch XL

Note: Only models compatible with currently loaded base model are listed

Processors

  • Canny, HED, MLSD, PidiNet, Normal Bae, LineArt Realistic, LineArt Anime,
  • Midas Depth Hybrid, Zoe Depth, Leres Depth, Leres Depth Boost,
  • DWPose Tiny, DWPose Medium, DWPose Large,
  • SegmentAnything Base, SegmentAnything Large, MediaPipe Face, Shuffle

Note: Processor sizes can vary from none for built-in ones to anywhere between 200MB up to 4.2GB for ZoeDepth-Large

Reference

Reference mode is its own pipeline, so it cannot have multiple units or processors

Workflows

Inputs & Outputs

  • Image -> Image
  • Batch: list of images -> Gallery and/or Video
  • Folder: folder with images -> Gallery and/or Video
  • Video -> Gallery and/or Video

Notes:

  • Input/Output/Preview panels can be minimized by clicking on them
  • For video output, make sure to set video options

Unit

  • Unit is: input plus process plus control
  • Pipeline consists of any number of configured units
    If unit is using using control modules, all control modules inside pipeline must be of same type
    e.g. ControlNet, ControlNet-XS, T2I-Adapter or Reference
  • Each unit can use primary input or its own override input
  • Each unit can have no processor in which case it will run control on input directly
    Use when you're using predefined input templates
  • Unit can have no control in which case it will run processor only
  • Any combination of input, processor and control is possible
    For example, two enabled units with process only will produce compound processed image but without control

What-if?

  • If no input is provided then pipeline will run in txt2img mode
    Can be freely used instead of standard txt2img
  • If none of units have control or adapter, pipeline will run in img2img mode using input image
    Can be freely used instead of standard img2img
  • If you have processor enabled, but no controlnet or adapter loaded,
    pipeline will run in img2img mode using processed input
  • If you have multiple processors enabled, but no controlnet or adapter loaded,
    pipeline will run in img2img mode on blended processed image
  • Output resolution is by default set to input resolution,
    Use resize settings to force any resolution
  • Resize operation can run before (on input image) or after processing (on output image)
  • Using video input will run pipeline on each frame unless skip frames is set
    Video output is standard list of images (gallery) and can be optionally encoded into a video file
    Video file can be interpolated using RIFE for smoother playback

Logging

To enable extra logging for troubleshooting purposes,
set environment variables before running SD.Next

  • Linux:

    export SD_CONTROL_DEBUG=true
    export SD_PROCESS_DEBUG=true
    ./webui.sh --debug

  • Windows:

    set SD_CONTROL_DEBUG=true
    set SD_PROCESS_DEBUG=true
    webui.bat --debug

Requirements

Control itself does not have any additional requirements and any used models are downloaded automatically
However, some processors require additional packages to be installed

Note: Its recommended to activate venv before installing requirements

  • DWPose: Requires OpenMMLab framework
    pip install openmim
    mim install mmengine mmcv mmpose mmdet
  • MediaPipe: Requires MediaPipe framework
    pip install mediapipe

Limitations / TODO

Todo

  • Validate all models: ControlNet, T2I-Adapter, Reference
  • Bind restore button and override controls
  • API is missing
  • Some metadata is not included in output images (key metadata is included)
  • Model load can take some time and there is no progress indicator in UI, only in logs
    Especially on first access since model needs to be downloaded

Limitations

  • ControlNet konhya-ss lllite is not supported

Future

Clone this wiki locally