You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I am trying to get an understanding of how the two settings a) "Fully fed to grid" and b) "Fixed Charge/Discharge" in the Working mode settings behave. This in order to update the custom sensors I've shared on GitHub. Specifically, I'm in doubt of how the settings behave if there is a load in the house which can not be covered by Yield. Would a discharge of the battery still prioritize house load, or would the house load be ignored entirely? As of now I have these sensors to diverse the discharging of the battery. Anny input will be appricieted.
- name: "Power Battery Discharge"
unique_id: power_battery_discharge
unit_of_measurement: W
device_class: power
state_class: measurement
state: >
{{ (
states('sensor.battery_charge_discharge_power') | float(0)
, 0 ) | min | abs }}
- name: "Power Battery Discharge Grid"
unique_id: power_battery_discharge_grid
unit_of_measurement: W
device_class: power
state_class: measurement
state: >
{% if is_state('select.battery_working_mode', 'fixed_charge_discharge') or
is_state('select.battery_working_mode', 'fully_fed_to_grid') %}
{{ states('sensor.power_battery_discharge') | float(0) }}
{% else %}
{{ 0 }}
{% endif %}
- name: "Power Battery Discharge House"
unique_id: power_battery_discharge_house
unit_of_measurement: W
device_class: power
state_class: measurement
state: >
{% if is_state('select.battery_working_mode', 'fixed_charge_discharge') or
is_state('select.battery_working_mode', 'fully_fed_to_grid') %}
{{ 0 }}
{% else %}
{{ states('sensor.power_battery_discharge') | float(0) }}
{% endif %}
Also I'm not sure how the "Adaptive" working mode behaves. It is not accessible in FusionSolar (DK).
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I am trying to get an understanding of how the two settings a) "Fully fed to grid" and b) "Fixed Charge/Discharge" in the Working mode settings behave. This in order to update the custom sensors I've shared on GitHub. Specifically, I'm in doubt of how the settings behave if there is a load in the house which can not be covered by Yield. Would a discharge of the battery still prioritize house load, or would the house load be ignored entirely? As of now I have these sensors to diverse the discharging of the battery. Anny input will be appricieted.
Also I'm not sure how the "Adaptive" working mode behaves. It is not accessible in FusionSolar (DK).
Beta Was this translation helpful? Give feedback.
All reactions