- SSDT-AWAC.aml: To fix RTC clock and fix initial boot halt
- SSDT-BATT.aml: To enable full battery information readout on macOS and enable limit charging capacity
- SSDT-dGPU-Off.aml: Disables and fully shuts down Nvidia MX250 in macOS
- SSDT-EC.aml: To patch Embedded Controller name and stop kernel panic
- SSDT-GPIO.aml: Patch ELAN1200 TrackPad
- SSDT-PLUG.aml: Patch CPU Power Management
- SSDT-PMC.aml: To fix and enable native NVRAM and fix initial boot halt
- SSDT-PNLFCFL.aml: To patch display backlight
- SSDT-SBUS-MCHC.aml: Fix SMBus
- SSDT-USBX.aml: To power up all USB ports
- ssdt_data.aml: Data for CPUFriend
- AudioDxe.efi: Enable Boot chime in OpenCore
- HfsPlus.efi: HFS+ driver to load HFS+ formatted USB installers
- OpenCanopy.efi: Load OpenCore GUI
- OpenRuntime.efi: OpenCore's backbone
- ResetNvramEntry.efi: Enable the option to reset NVRAM
- AirportItlwm.kext: Enable Intel Wifi. For macOS 14.4+. Replace this kext if target version is lower.
- AppleALC.kext: Enable audio
- AsusSMC.kext: Enable battery charging limiter
- BlueToolFixup.kext: Bluetooth fix
- BrightnessKeys.kext: Fix brightness keys
- CPUFriend.kext: Further optimise CPU Power Management
- CPUFriendDataProvider.kext: 800MHz min freq & performance power state. Built for 14.5. Rebuild if using different version.
- CpuTscSync.kext: Fix CPU to prevent kernel panic
- IntelBluetoothFirmware.kext: Enable Intel Bluetooth
- IntelBTPatcher.kext: Intel Bluetooth fix
- Lilu.kext: Backbone of loading kexts
- NVMeFix.kext: Fix and power up NVMe drives
- SMCBatteryManager.kext: Enable battery readout
- SMCProcessor.kext: Enable CPU temp monitoring
- USBToolBox.kext: Map all USB ports
- UTBMap.kext: Map all USB ports
- VirtualSMC.kext: Backbone of the hackintosh
- VoltageShift.kext: Undervolt CPU. Build this kext on your system on post install
- VoodooI2C.kext: Enable full TrackPad support
- VoodooI2CHID.kext: Enable full TrackPad support
- VoodooPS2Controller.kext: Enable keybaord
- WhateverGreen.kext: Enable QE/CI on UHD 620