Minimalist, compact, elegant - there is nothing superfluous in it, only the necessary set of elements to know yourself and the harmony of your own world...
This keyboard was made with FDM printing in mind, the goal was to make a perfect curved case that can be easily printed and looks aesthetically pleasing with minimal amount of so called "steps" that plague similar 3D keyboards like Dactyl Manuform. This is mostly inspired by the Cygnus, Smudge and Chonky Bois keyboards, we wanted to make a similar "organic" shaped keyboard but much more optimized for FDM printing, easy assembly and looking good not only on a photo but also in real life 😎
- Ergonomic 3D design
- 46 fully programmable keys, 15 additional layers for all your tasks
- Powered by RP2040 Zero and QMK firmware
- Hotswappable PCB
- Type-C output for connection between halves
- Easily remap any key and customize your keyboard with Vial
- Firmware is being constantly updated, get the latest QMK features for your keyboard from us
♥️
PCB and schematic can be found here
- 2 RP2040 Zero MCU
- 46 MX Hotswap sockets
- 46 1N4148W Diodes (SOD-123)
- 2 Male Pin Header Connector: 11 Pins, 2.54mm, 90 degree (example)
- 2 Female Header Sockets: 11 Pins, 2.54mm, 90 degree (example)
- 4 10kOhm resistors (0805)
- USB Type-C daughterboard: 1.6mm thick (example)
- 30 M2x4 Screws (example)
- 10 M3x4 Inserts (example)
- 10 M3x4 Screws (example)
- 1 Type-C to Type-C data cable (for connection between halves)
The files in this repository are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The complete keyboard (not a diy kit!) is available for purchase at ergohaven.xyz