v3.2.0

3.2.0 (2022-02-04)

Special thanks to the amazing uswong for adding these new features! Thank you to all who participated in the beta testing!

Notable Changes

• Zone closing check to ensure that at least one zone is open at all times as a secondary layer of protection for your ducting.
  • If you close all zones, it will open your Constant Zone damper to 100%.
• No longer require the use of noSensors in your config.json. The script determines if you have sensors or not.
• Temperature Sensor users no longer require to add zone (z01, z02, etc.) to "state_cmd_suffix" of Thermostat in your config.json. The script determines and sets it as your Constant Zone.
  • You can still set a zone if you prefer to choose a different zone to your Constant Zone.
• Countdown timer added as a Lightbulb accessory; config can be found here.
  • Depending on if your Advantage Air system is on or off will determine if the countdown is to turn the system on or off when it reaches 0.
  • New constant timer will need to be added to the "state_cmd_suffix" of this accessory.
  • The Advantage Air system will only allow 720 minutes (12 hours) for a timer and the Lightbulb has 0-100% to utilise.
    • Therefore, setting 1% will equal 10 minutes, 6% will be equal to 1 hour.
    • Setting a value higher than 72% (720 minutes), will default back to 72% on the Lightbulb.

Other Changes

• Shell Check Tool updated for new configurations. Always check you config.json with this after making changes!
• Dev dependancy nanoid security update to v3.1.31.