-
-
Notifications
You must be signed in to change notification settings - Fork 70
Thin Wall Test
The purpose of this item is to test your settings in the case of geometry with thin walls and irregular thickness. The part is designed to be printed with a 0.4 mm nozzle. The objective is to be able to refine yours settings to allow the realization of model which can present geometries with issues due to an inappropriate thicknesses.
The smallest wall width is 0.35 mm. It is therefore necessary to activate the option "Print Thin Walls" to be able to print this test.
Two results in Cura 4.X.
Thichness
Thickness of the 4 thin walls
- 0.35 mm
- 0.5 mm
- 0.8 mm
- 1 mm
- Nozzle Size : 0.4
- Layer Height : 0.2
- Initial Layer Height : 0.2
- Line Width : 0.4
- Wall Line Count : 3
- Top/Bottom Thickness : 0.8 mm
- Fill Gaps Between Walls (Only for release of Cura previous to V5) : Everywhere
- Print Thin Walls : True
Printing Time = 7mn
Check the result, you should obtain a complete geometry. With a calliper control the 4 walls width.
Cura 5.0 offer some new settings to manage such part. This part have been updated to test these settings
- Wall Transition Length
- Wall Distribution Count
- Wall Transitioning Threshold Angle
- Wall Transitioning Filter Distance
- Wall Transitioning Filter Margin
- Minimum Wall Line Width
- Minimum Even Wall Line Width
- Minimum Odd Wall Line Width
- Add Middle Line Threshold
- Minimum Feature Size
- Minimum Thin Wall Line Width
- Split Middle Line Threshold
Calibration-Shapes Plugin On Ultimaker Marketplace