Skip to content

ROS & Gazebo F1/10 Autonomous Racecar Simulator

License

Notifications You must be signed in to change notification settings

ARK3r/f1tenth_urdf

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

25 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Simulator Paper

Please cite the paper below if you use this simulator for your research:

@inproceedings{babu2020f1tenth,
  title={f1tenth. dev-An Open-source ROS based F1/10 Autonomous Racing Simulator},
  author={Babu, Varundev Suresh and Behl, Madhur},
  booktitle={2020 IEEE 16th International Conference on Automation Science and Engineering (CASE)},
  pages={1614--1620},
  year={2020},
  organization={IEEE}
}

Installation and Setup

The simulator has been tested on a variety of hardware configurations, and while Gazebo and ROS dependencies work with bare minimum hardware requirements, the essence of an autonomous racing simulator requires a real-time factor of at-least 0.85. For this reason, we suggest that your local machine meet the requirements stated in the following table.

Suggested Minimum Requirements
Operating System Ubuntu 18.04 (Bionic) 64-bit
Memory 16 GiB DDR4
GPU NVIDIA GTX-1660

The simulator itself depends on libraries, packages and objects from ROS and Gazebo. The current version of the simulator uses ROS Melodic and Gazebo 9; along with certain other libraries and their python bindings. Before proceeding with the installation steps in this document, check if your local machine already has the full-desktop version of ROS Melodic installed. If not, follow the instructions provided in this link. When you get to section 1.4 of the ROS installation tutorial, choose the first option: ros-melodic-desktop-full. Your local machine will now have the basic dependencies installed. The next steps of the installation tutorial are critical and must be followed in the shown sequence.

First, we begin by installing the ROS and Gazebo packages that are not installed by default using the above method. This includes SLAM packages, ROS navigation and the MIT GPU particle filter. Some of these packages have a Debian installation candidates and the others have to be downloaded as source codes and locally compiled. We install the Debian packages first; open a new terminal and enter the following command:

user@ros-computer: sudo apt-get install -y ros-melodic-navigation ros-melodic-teb-local-planner* ros-melodic-ros-control ros-melodic-ros-controllers ros-melodic-gazebo-ros-control ros-melodic-ackermann-msgs ros-melodic-serial qt4-default

Once the above installation process is completed, the simulator source along with the particle filter and mapping package will have to be downloaded. To do this, we first need to create a ROS workspace. Open a new terminal and enter the following commands in the given sequence:

user@ros-computer: mkdir -p autosim_ws/src
user@ros-computer: cd autosim_ws/src
user@ros-computer: catkin_init_workspace

The simulator workspace is now initialized. The source for the packages will now have to be placed in the src directory to be compiled later. In the same terminal, enter the following commands to pull the sources:

user@ros-computer: git clone https://github.com/f1tenth-dev/simulator
user@ros-computer: git clone https://github.com/mit-racecar/particle_filter
user@ros-computer: git clone https://github.com/kctess5/range_libc
user@ros-computer: git clone https://github.com/tu-darmstadt-ros-pkg/hector_slam

The source for the required packages, including the simulator, are now in the workspace. The simulator depends on the GPU particle filter developed by the MIT RACECAR team and this package has to be configured before compiling the ROS packages. Navigate to the range_libc folder to compile the library necessary for the particle filter. Open a new terminal and enter the following commands:

user@ros-computer: sudo pip install cython
user@ros-computer: cd autosim_ws/src/range_libc/pywrapper

There are two methods for installing the particle filter; with GPU support and without GPU support. We recommend using the package with GPU support, but leave the decision to you.

Installing with GPU Support
Keep this terminal open and pay special attention to the next step. The particle filter package depends heavily on the GPU and its architecture, so it becomes very important to match the architecture of the GPU in your local machine to the one listed in the configuration of setup.py. We are particularly interested in the sm_xx value associated with the GPU and more information can be found in this article which is a good reference for understanding types NVIDIA's GPU. Once the architecture type has been identified, go back to the terminal and open the setup file using an editor of your choice and navigate to line 96:

nvcc_flags = ['-arch=sm_20', '--ptxas-options=-v', '-c', '--compiler-options', "'-fPIC'", "-w","-std=c++11"]

Replace -arch=sm_20 with the -arch=sm_xx value from the article in the link provided above. Once you have made the changes, save the file and exit back to the terminal and enter the following command to compile the library and follow the instruction on the screen:

user@ros-computer: ./compile_with_cuda.sh

Installing without GPU Support
In the same terminal, enter the following command and follow the instructions in the screen:

user@ros-computer: ./compile.sh

With the final dependency installed, the installation process can now be continued using ROS catkin_make. This process is relatively simple; open a new terminal and enter the following command:

user@ros-computer: cd autosim_ws
user@ros-computer: catkin_make install

The installation process in now complete, and the workspace needs to be sourced. Sourcing the workspace permanently helps launching the simulator easier. To do this, the .bashrc file in the home directory has to be modified; open a new terminal and enter the following command:

user@ros-computer: echo "source ~/autosim_ws/devel/setup.bash" >> ~/.bashrc
user@ros-computer: source ~/.bashrc

You have now completed the steps necessary to install the simulator. The tutorial section will help you get started with the simulator.

Uninstalling the Simulator
Removing the simulator from your local machine is a two-step process: first remove the line from ~/.bashrc that sources the simulator workspace and then delete the autosim_ws directory.

About

ROS & Gazebo F1/10 Autonomous Racecar Simulator

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 65.6%
  • CMake 34.4%