Buyer's Guide
[Miniscope V4 Wiki] [Miniscope DAQ Software Wiki] [Miniscope DAQ Firmware Wiki]
In this repository we have included everything you need to source, fabricate, and assembled V4 Miniscope however you choose. The Buyer's Guide below focuses on options available through open-source distribution groups (currently OEPS and LabMaker) for purchasing fully assembled V4 Miniscopes, V4 Assembly Kits, assembled and tested DAQs, and other Miniscope accessories. The vast majority of labs should follow the options discussed in this guide for obtaining and setting up Miniscopes in your lab. If however, you want to procure V4 Miniscope components individually you should follow our Part Procurement guide.
A Note on the Open-Source Nature of the Miniscope Project: With the Miniscope project being an open-source project, any person, group, or company has the option of putting together and selling any part of this system. While this has generally resulted in mostly well put together parts and system for previous Miniscopes released, there is always the risk that some groups/companies will supply less-than-adequate components/systems. We try to work with open-source distribution groups and commercial companies interested in distributing parts of our system to make sure the work/support/systems they provide are up to the standards the neuroscience community expects. In the procurement guide below, we try to list as many avenues as possible of getting high-quality components for Miniscopes. If you know of, or have questions about, other sources of components/systems feel free to ask us about them on the Miniscope Discussion Forum.
This guide is broken up into 3 sections: Miniscope DAQs, Miniscope Assembly Kits and fully assembled Miniscopes, and other Miniscope Accessories. We will provide details and opinions on when is currently available to purchase through online stores.
Note: The Miniscope team has worked closely with Open Ephys Production Site (OEPS) since 2019 to develop a road-map for what we think will be the future of open-source tool development, dissemination, and distribution. Below, we provide all purchasing options currently known to us but if you are interested in supporting the Miniscope project and, more broadly, continued open-source tool development/distribution we highly suggest you consider the OEPS purchasing options.
You will need a Miniscope Data Acquisition (DAQ) Box to connect your Miniscope to your computer. The V4 Miniscope will work seamlessly with all previous generations of Miniscope DAQs. So if your lab has already been using Miniscopes there is no need to purchase new DAQ's unless you need more of them.
-
OEPS's Miniscope DAQ v3.3: This Miniscope DAQ supports the previous generation Miniscope (V3.x), the current generation Minsicope (V4), and the open-source NINscope developed by the Hoogland Lab. OEPS's DAQ includes a programmed and tested DAQ PCB along with a housing for it. This is our preferred Miniscope DAQ if you need one.
OEPS has updated the Minsicope DAQ design (from version 3.2 to version 3.3) to include the following additional features:
- Doubled, future-proof internal memory
- Access to one additional IO
- 5V tolerant digital inputs, which means that you can connect directly to an Arduino or a 5V TTL signal
- Layout re-design that makes it directly compatible with NINscope
OEPS also carries some Miniscope DAQ Accessories but these are not required for the Miniscope system to be functional.
- LabMaker's Miniscope V4 -DAQ PCB: All of the Miniscope DAQ PCBs listed on the LabMaker site should be functionally equivalent but the "Miniscope V4 - DAQ PCB" comes pre-programmed to run the V4 Miniscope. This DAQ PCB is based off the Miniscope DAQ v3.2. If you want a housing for it you can 3D print one yourself or get one printed here.
- LabMaker's Miniscope (V3/V4) Data Acquisition System: We do not suggest purchasing this option. You are basically paying an additional $600 for a box to go around LabMaker's Miniscope DAQ PCB.
The V4 Miniscope can now be purchased as a fully assembled system or as an Assembly Kit. We do prefer the v4 Miniscope Assembly Kit option over fully assembled options as we feel the process of building a Miniscope yourself is extremely valuable. It helps you understand what goes into the Miniscope, gives your confidence that it won't break (and if it does you can fix it), and might even spur on some ideas for modifying your Miniscope to best fit your experiments.
All the Miniscope V4 Baseplates listed below are the variant 2 version of the Baseplate. If you are getting Miniscope parts from any of the links above then you will always be using the variant 2 Baseplate. This version is compatible with V4 Miniscopes that have an aluminum sleeve around the bottom portion of the Miniscope.
- OEPS's Miniscope V4 Baseplates:
- Miniscopeparts.com Miniscope V4 Baseplates:
- LabMaker's Miniscope V4 Baseplates:
