Tuned Bridge flow ratio (from 0.95 to 1.4)

Adjusted bridgespeed from 25mm/s to 15mm/s
Activated option 'External perimeters first'
Deactivated option 'Ensure vertical shell thickness'
Adjusted Gap fill speed from 50mm/s to 25mm/s due to printer wobbling
Adjusted infill overlap from 30% to 0%
Removed max volumetric speed values
Adjusted seam position to aligned
Tuned support settings
Adjusted printspeeds

Config files/print/0.15mm @E2 0.6.ini

@@ -1,12 +1,12 @@
-# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:56:18 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:45:02 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 0
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1.4
 bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
@@ -17,10 +17,10 @@ default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.65
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.68
 external_perimeter_speed = 35
-external_perimeters_first = 0
+external_perimeters_first = 1
 extra_perimeters = 0
 extruder_clearance_height = 27
 extruder_clearance_radius = 52
@@ -40,10 +40,10 @@ infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.65
+infill_extrusion_width = 0.68
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 30%
+infill_overlap = 0%
 infill_speed = 70
 inherits = 
 interface_shells = 0
@@ -54,23 +54,23 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 90
-max_volumetric_speed = 20
+max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
+perimeter_extrusion_width = 0.68
 perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
@@ -80,32 +80,32 @@ small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.68
 solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.25
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_spacing = 0.2
+support_material_interface_layers = 3
+support_material_interface_spacing = 5
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 3
+support_material_spacing = 2.5
 support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 60

Config files/print/0.20mm @E2 0.6.ini

@@ -1,13 +1,13 @@
-# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:55:51 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:43:35 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 0
 bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
+bridge_flow_ratio = 1.4
+bridge_speed = 15
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -17,10 +17,10 @@ default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.65
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.68
 external_perimeter_speed = 35
-external_perimeters_first = 0
+external_perimeters_first = 1
 extra_perimeters = 0
 extruder_clearance_height = 27
 extruder_clearance_radius = 52
@@ -37,13 +37,13 @@ gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 0
 infill_anchor = 2.5
-infill_anchor_max = 15
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.65
+infill_extrusion_width = 0.68
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 30%
+infill_overlap = 0%
 infill_speed = 70
 inherits = 
 interface_shells = 0
@@ -54,23 +54,23 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 90
-max_volumetric_speed = 20
+max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
+perimeter_extrusion_width = 0.68
 perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
@@ -80,32 +80,32 @@ small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
+solid_infill_extrusion_width = 0.68
+solid_infill_speed = 70
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.25
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_spacing = 0.2
+support_material_interface_layers = 3
+support_material_interface_spacing = 5
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 3
-support_material_speed = 45
+support_material_spacing = 2.5
+support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 60

Config files/print/0.30mm @E2 0.6.ini

@@ -1,13 +1,13 @@
-# generated by PrusaSlicer 2.3.0-rc2+win64 on 2020-12-27 at 18:55:56 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-04 at 09:43:57 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 0
 bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 25
+bridge_flow_ratio = 1.4
+bridge_speed = 15
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -17,10 +17,10 @@ default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
-ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.65
-external_perimeter_speed = 35
-external_perimeters_first = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.68
+external_perimeter_speed = 72
+external_perimeters_first = 1
 extra_perimeters = 0
 extruder_clearance_height = 27
 extruder_clearance_radius = 52
@@ -32,19 +32,19 @@ first_layer_acceleration = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 15
-gap_fill_speed = 50
+gap_fill_speed = 25
 gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 0
 infill_anchor = 2.5
-infill_anchor_max = 15
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.65
+infill_extrusion_width = 0.68
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 70
+infill_overlap = 0
+infill_speed = 72
 inherits = 
 interface_shells = 0
 ironing = 0
@@ -53,62 +53,62 @@ ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
-max_print_speed = 90
-max_volumetric_speed = 20
+max_print_speed = 130
+max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
-overhangs = 0
+overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 45
-perimeters = 2
+perimeter_extrusion_width = 0.68
+perimeter_speed = 80
+perimeters = 4
 post_process = 
 print_settings_id = 
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
-small_perimeter_speed = 25
+small_perimeter_speed = 27
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 70
+solid_infill_extrusion_width = 0.68
+solid_infill_speed = 72
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 4
-support_material_interface_spacing = 0.2
+support_material_interface_layers = 3
+support_material_interface_spacing = 5
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 3
+support_material_spacing = 2.5
 support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 75%
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 60
+top_solid_infill_speed = 72
 top_solid_layers = 4
 top_solid_min_thickness = 0.6
 travel_speed = 150