[v1.3] Update changelog and config bundle.

README.md

@@ -49,6 +49,15 @@ You will need to do this for all the Printer profiles.
 
 # Changelog
 
+## [v1.3] - 2020-12-21
+### Notes:
+
+* Adjusted Min/Max layer height according to nozzle size (for better variable layerheight procedure)
+* Tuned support settings for 0.6mm nozzle
+* Added filament_weight on output filename
+* Tuned Ironing for 0.6mm nozzle
+* Tuned retraction for dual extrusion prints
+
 ## [v1.2] - 2020-12-18
 ### Notes:
 

Raise3D - E2.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0-beta3+win64 on 2020-12-18 at 07:31:49 UTC
+# generated by PrusaSlicer 2.3.0-rc1+win64 on 2020-12-21 at 20:00:33 UTC
 
 [print:0.15mm @E2 0.6]
 avoid_crossing_perimeters = 0
@@ -51,7 +51,7 @@ inherits =
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
-ironing_spacing = 0.1
+ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
@@ -61,7 +61,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
 overhangs = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -90,22 +90,22 @@ support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 4
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2
+support_material_spacing = 3
 support_material_speed = 45
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -174,7 +174,7 @@ inherits =
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
-ironing_spacing = 0.1
+ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
@@ -184,7 +184,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
 overhangs = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -213,22 +213,22 @@ support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 4
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2
+support_material_spacing = 3
 support_material_speed = 45
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -297,7 +297,7 @@ inherits =
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
-ironing_spacing = 0.1
+ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
@@ -307,7 +307,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
 overhangs = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -342,16 +342,16 @@ support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 4
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2
+support_material_spacing = 3
 support_material_speed = 45
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -420,7 +420,7 @@ inherits =
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
-ironing_spacing = 0.1
+ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.35
@@ -430,7 +430,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
 overhangs = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -459,22 +459,22 @@ support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 4
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2
+support_material_spacing = 3
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -543,7 +543,7 @@ inherits =
 interface_shells = 0
 ironing = 0
 ironing_flowrate = 15%
-ironing_spacing = 0.1
+ironing_spacing = 0.15
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.4
@@ -553,7 +553,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}_{total_weight}g.gcode
 overhangs = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -582,22 +582,22 @@ support_material = 0
 support_material_angle = 0
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.25
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 4
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
-support_material_spacing = 2
+support_material_spacing = 3
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 75%
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -919,7 +919,7 @@ default_print_profile =
 deretract_speed = 25,25
 end_gcode = M605 S0 ; set to standard mode\nM221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nG92 E0 ; set position\nM1002 ; Start of End G-code\nM221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91\nG1 E-1 F1800 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG28 X0 Y0 ; move toolheads to start positions\nM84 ; stop idle hold\nG90 ; set to absolute positioning
 extra_loading_move = -2
-extruder_colour = ;
+extruder_colour = ;#000000
 extruder_offset = 0x0,0x0
 gcode_flavor = reprapfirmware
 high_current_on_filament_swap = 0
@@ -943,9 +943,9 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_layer_height = 0,0
+max_layer_height = 0.48,0.48
 max_print_height = 240
-min_layer_height = 0.07,0.07
+min_layer_height = 0.15,0.15
 nozzle_diameter = 0.6,0.6
 parking_pos_retraction = 92
 pause_print_gcode = M2000 ; pause/colorchange
@@ -963,12 +963,12 @@ retract_before_travel = 0.6,0.6
 retract_before_wipe = 0%,0%
 retract_layer_change = 0,0
 retract_length = 0.5,0.5
-retract_length_toolchange = 10,10
+retract_length_toolchange = 2,2
 retract_lift = 0,0
 retract_lift_above = 0,0
 retract_lift_below = 0,0
 retract_restart_extra = 0,0
-retract_restart_extra_toolchange = 2,2
+retract_restart_extra_toolchange = 0,0
 retract_speed = 40,40
 silent_mode = 1
 single_extruder_multi_material = 0
@@ -994,7 +994,7 @@ cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 default_filament_profile = ""
 default_print_profile = 
-deretract_speed = 25,0
+deretract_speed = 25,25
 end_gcode = M221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nG92 E0 ; set position\nM1002 ; Start of End G-code\nM221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91\nG1 E-1 F1800 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG28 X0 U0 ; move toolheads to start positions\nM84 ; stop idle hold\nG90 ; set to absolute positioning\nM605 S0 ; set to standard mode
 extra_loading_move = -2
 extruder_colour = ;
@@ -1021,9 +1021,9 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_layer_height = 0,0
+max_layer_height = 0.48,0.48
 max_print_height = 240
-min_layer_height = 0.07,0.07
+min_layer_height = 0.15,0.15
 nozzle_diameter = 0.6,0.6
 parking_pos_retraction = 92
 pause_print_gcode = M2000 ; pause/colorchange
@@ -1037,11 +1037,11 @@ printer_vendor =
 printhost_apikey = 
 printhost_cafile = 
 remaining_times = 1
-retract_before_travel = 0.6,2
+retract_before_travel = 0.6,0.6
 retract_before_wipe = 0%,0%
 retract_layer_change = 0,0
-retract_length = 0.5,2
-retract_length_toolchange = 10,10
+retract_length = 0.5,0.5
+retract_length_toolchange = 2,2
 retract_lift = 0,0
 retract_lift_above = 0,0
 retract_lift_below = 0,0
@@ -1099,9 +1099,9 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_layer_height = 0
+max_layer_height = 0.48
 max_print_height = 240
-min_layer_height = 0.07
+min_layer_height = 0.15
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
 pause_print_gcode = M2000 ; pause/colorchange
@@ -1150,7 +1150,7 @@ cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 default_filament_profile = ""
 default_print_profile = 
-deretract_speed = 25,0
+deretract_speed = 25,25
 end_gcode = M221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nG92 E0 ; set position\nM1002 ; Start of End G-code\nM221 T0 S100 ; reset flow\nM221 T1 S100 ; reset flow\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG91\nG1 E-1 F1800 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG28 X0 U0; move toolheads to start positions\nM84 ; stop idle hold\nG90 ; set to absolute positioning\nM605 S0 ; set to standard mode
 extra_loading_move = -2
 extruder_colour = ;
@@ -1177,9 +1177,9 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_layer_height = 0,0
+max_layer_height = 0.48,0.48
 max_print_height = 240
-min_layer_height = 0.07,0.07
+min_layer_height = 0.15,0.15
 nozzle_diameter = 0.6,0.6
 parking_pos_retraction = 92
 pause_print_gcode = M2000 ; pause/colorchange
@@ -1193,11 +1193,11 @@ printer_vendor =
 printhost_apikey = 
 printhost_cafile = 
 remaining_times = 1
-retract_before_travel = 0.6,2
+retract_before_travel = 0.6,0.6
 retract_before_wipe = 0%,0%
 retract_layer_change = 0,0
-retract_length = 0.5,2
-retract_length_toolchange = 10,10
+retract_length = 0.5,0.5
+retract_length_toolchange = 2,2
 retract_lift = 0,0
 retract_lift_above = 0,0
 retract_lift_below = 0,0
@@ -1255,9 +1255,9 @@ machine_max_jerk_y = 10,10
 machine_max_jerk_z = 0.2,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
-max_layer_height = 0
+max_layer_height = 0.48
 max_print_height = 240
-min_layer_height = 0.07
+min_layer_height = 0.15
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
 pause_print_gcode = M2000 ; pause/colorchange
@@ -1299,7 +1299,6 @@ z_offset = 0
 print = 0.20mm @E2 0.6
 sla_print = 
 sla_material = 
-printer = Raise3D E2 0.6 - Dual extrude
+printer = Raise3D E2 0.6 - Left head
 filament = PLA @E2
-filament_1 = PLA @E2
 physical_printer =