Skip to content
forked from gabrie30/ghorg

Quickly clone an entire org/users repositories into one directory - Supports GitHub, GitLab, Bitbucket, and more 🥚

License

Notifications You must be signed in to change notification settings

AmirulAndalib/ghorg

 
 

Repository files navigation

ghorg

Go Report Card GoDoc Mentioned in Awesome Go License WakeMeOps

Pronounced [gore-guh]; similar to gorge. You can use ghorg to gorge on orgs.

Use ghorg to quickly clone all of an orgs, or users repos into a single directory. This can be useful in many situations including

  1. Searching an orgs/users codebase with ack, silver searcher, grep etc..
  2. Bash scripting
  3. Creating backups
  4. Onboarding new team members (cloning all team repos)
  5. Performing Audits

With default configuration ghorg performs two actions.

  1. Will clone a repo if its not inside the clone directory.
  2. If repo does exists locally in the clone directory it will perform a git pull and git clean on the repo.

So when running ghorg a second time on the same org/user, all local changes in the cloned directory by default will be overwritten by what's on GitHub. If you want to work out of this directory, make sure you either rename the directory or set the --no-clean flag on all future clones to prevent losing your changes locally.

ghorg cli example

Supported Providers

The terminology used in ghorg is that of GitHub, mainly orgs/repos. GitLab and BitBucket use different terminology. There is a handy chart thanks to GitLab that translates terminology here. Note, some features may be different for certain providers.

Configuration

Precedence for configuration is first given to the flags set on the command-line, then to what's set in your $HOME/.config/ghorg/conf.yaml. This file comes from the sample-conf.yaml.

If no configuration is found ghorg will use its defaults and try to clone a GitHub Org, however an api token is always required.

You can have multiple configuration files which is useful if you clone from multiple SCM providers with different tokens and settings. Alternative configuration files can only be referenced as a command-line flag --config.

If you have multiple different orgs/users/configurations to clone see the ghorg reclone command as a way to manage them.

Note: ghorg will respect the XDG_CONFIG_HOME environment variable if set.

Windows support

Windows is supported when built with golang or as a prebuilt binary however, the readme and other documentation is not geared towards Windows users.

Alternatively, Windows users can also install ghorg using scoop

scoop bucket add main
scoop install ghorg

Installation

Prebuilt Binaries

See latest release to download directly for

  • Mac (Darwin)
  • Windows
  • Linux

If you don't know which to choose its likely going to be the x86_64 version for your operating system

Homebrew

optional but recommended

mkdir -p $HOME/.config/ghorg
curl https://raw.githubusercontent.com/gabrie30/ghorg/master/sample-conf.yaml > $HOME/.config/ghorg/conf.yaml
vi $HOME/.config/ghorg/conf.yaml # To update your configuration

required

brew install gabrie30/utils/ghorg

Golang

optional but recommended

mkdir -p $HOME/.config/ghorg
curl https://raw.githubusercontent.com/gabrie30/ghorg/master/sample-conf.yaml > $HOME/.config/ghorg/conf.yaml
vi $HOME/.config/ghorg/conf.yaml # To update your configuration

required

# ensure $HOME/go/bin is in your path ($ echo $PATH | grep $HOME/go/bin)

# if using go 1.16+ locally
go install github.com/gabrie30/ghorg@latest

# older go versions can run
go get github.com/gabrie30/ghorg

SCM Provider Setup

Note: if you are running into issues, read the troubleshooting and known issues section below

GitHub Setup

  1. Create Personal Access Token with all repo scopes. Update GHORG_GITHUB_TOKEN in your ghorg/conf.yaml or as a cli flag. If your org has Saml SSO in front you will need to give your token those permissions as well, see this doc.
  2. For cloning GitHub Enterprise (self hosted github instances) repos you must set --base-url e.g. ghorg clone <github_org> --base-url=https://internal.github.com
  3. See examples/github.md on how to run

GitLab Setup

  1. Create Personal Access Token with the read_api scope (or api for self-managed GitLab older than 12.10). This token can be added to your ghorg/conf.yaml or as a cli flag.
  2. Update the GitLab Specific config in your ghorg/conf.yaml or via cli flags
  3. Update GHORG_SCM_TYPE to gitlab in your ghorg/conf.yaml or via cli flags
  4. See examples/gitlab.md on how to run

GitLab Specific Notes

  1. With GitLab, if ghorg detects repo naming collisions with repos being cloned from different groups/subgroups, ghorg will automatically append the group/subgroup path to the repo name. You will be notified in the output if this occurs.

  2. There are different commands for hosted gitlab instances vs gitlab cloud read below for the differences.

Hosted GitLab Instances
  1. To clone all the groups at once use the keyword "all-groups". Note, all-groups requires a GitLab 13.0.1 or greater and will only clone from groups/repos your user has permissions to.

    $ ghorg clone all-groups --base-url=https://${your.hosted.gitlab.com} --scm=gitlab --token=XXXX --preserve-dir
  2. For all versions of GitLab you can clone groups or sub groups individually

    # cloning a top level group
    $ ghorg clone mygroup --base-url=https://${your.hosted.gitlab.com} --scm=gitlab --token=XXXX --preserve-dir
    
    # cloning a subgroup
    $ ghorg clone mygroup/mysubgroup --base-url=https://${your.hosted.gitlab.com} --scm=gitlab --token=XXXX --preserve-dir
  3. You must set --base-url which is the url to your instance. If your instance requires an insecure connection you can use the --insecure-gitlab-client flag

GitLab Cloud

To clone all repos you can use the top level group name e.g. to clone gitlab-examples on GitLab cloud https://gitlab.com/gitlab-examples

$ ghorg clone gitlab-examples --scm=gitlab --token=XXXX --preserve-dir

Gitea Setup

  1. Create Access Token (Settings -> Applications -> Generate Token)
  2. Update GHORG_GITEA_TOKEN in your ghorg/conf.yaml or use the (--token, -t) flag.
  3. Update GHORG_SCM_TYPE to gitea in your ghorg/conf.yaml or via cli flags
  4. See examples/gitea.md on how to run

Bitbucket Setup

App Passwords

  1. To configure with bitbucket you will need to create a new app password and update your $HOME/.config/ghorg/conf.yaml or use the (--token, -t) and (--bitbucket-username) flags.
  2. Update SCM type to bitbucket in your ghorg/conf.yaml or via cli flags
  3. See examples/bitbucket.md on how to run

PAT/OAuth token

  1. Create a PAT
  2. Set the token with GHORG_BITBUCKET_OAUTH_TOKEN in your $HOME/.config/ghorg/conf.yaml or using the --token flag. Make sure you do not have --bitbucket-username set.
  3. Update SCM TYPE to bitbucket in your ghorg/conf.yaml or via cli flags
  4. See examples/bitbucket.md on how to run

How to Use

See examples dir for more SCM specific docs

# note: to view/set all available flags/features see sample-conf.yaml
$ ghorg clone kubernetes --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2
$ ghorg clone davecheney --clone-type=user --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2
$ ghorg clone gitlab-examples --scm=gitlab --preserve-dir --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2
$ ghorg clone gitlab-examples/wayne-enterprises --scm=gitlab --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2
$ ghorg clone all-groups --scm=gitlab --base-url=https://gitlab.internal.yourcompany.com --preserve-dir
$ ghorg clone --help
# view cloned resources
$ ghorg ls
$ ghorg ls someorg

With Docker

This is only recommended for testing due to resource constraints

  1. Clone repo then cd ghorg
  2. Build the image docker build . -t ghorg-docker
  3. Run in docker
# using your local ghorg configuration file, cloning in container
docker run -v $HOME/.config/ghorg:/root/.config/ghorg ghorg-docker ghorg clone kubernetes

# using flags, cloning in container
docker run ghorg-docker ghorg clone kubernetes --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2

# using flags, cloning to your machine
docker run -v $HOME/ghorg/:/root/ghorg/ ghorg-docker ghorg clone kubernetes --token=bGVhdmUgYSBjb21tZW50IG9uIGlzc3VlIDY2 --output-dir=cloned-from-docker

Changing Clone Directories

  1. By default ghorg will clone the org or user repos into a directory like $HOME/ghorg/org. If you want to clone the org to a different directory use the --path flag or set GHORG_ABSOLUTE_PATH_TO_CLONE_TO in your ghorg conf. This value must be an absolute path. For example if you wanted to clone the kubernetes org to /tmp/ghorg you would run the following command.

    $ ghorg clone kubernetes --path=/tmp/ghorg
    

    which would create...

    /tmp/ghorg
    └── kubernetes
        ├── apimachinery
        ├── gengo
        ├── git-sync
        ├── kubeadm
        ├── kubernetes-template-project
        ├── ...
    
  2. If you want to change the name of the directory the repos get cloned into, set the GHORG_OUTPUT_DIR in your ghorg conf or set the --output-dir flag. For example to clone only the repos starting with sig- from the kubernetes org into a direcotry called kubernetes-sig-only. You would run the following command.

    $ ghorg clone kubernetes --match-regex=^sig- --output-dir=kubernetes-sig-only
    

    which would create...

    $HOME/ghorg
    └── kubernetes-sig-only
        ├── sig-release
        ├── sig-security
        └── sig-testing
    

Filtering Repos

  • To only clone repos that match regex use --match-regex flag or exclude cloning repos that match regex with --exclude-match-regex

  • To only clone repos that match prefix(s) use --match-prefix flag or exclude cloning repos that match prefix(s) with --exclude-match-prefix

  • To filter out any archived repos while cloning use the --skip-archived flag (not bitbucket)

  • To filter out any forked repos while cloning use the --skip-forks flag

  • Filter by specific repo topics GHORG_TOPICS or --topics will clone only repos with a matching topic. GitHub/GitLab/Gitea only

  • To ignore specific repos create a ghorgignore file inside $HOME/.config/ghorg. Each line in this file is considered a substring and will be compared against each repos clone url. If the clone url contains a substring in the ghorgignore it will be excluded from cloning. To prevent accidentally excluding a repo, you should make each line as specific as possible, eg. https://github.com/gabrie30/ghorg.git or git@github.com:gabrie30/ghorg.git depending on how you clone. This is useful for permanently ignoring certain repos.

    # Create ghorgignore
    touch $HOME/.config/ghorg/ghorgignore
    
    # Update file
    vi $HOME/.config/ghorg/ghorgignore

Creating Backups

When taking backups the notable flags are --backup, --clone-wiki, and --include-submodules. The --backup flag will clone the repo with git clone --mirror. The --clone-wiki flag will include any wiki pages the repo has. If you want to include any submodules you will need --include-submodules. Lastly, if you want to exclude any binary files use the the flag --git-filter=blob:none to prevent them from being cloned.

ghorg clone kubernetes --backup --clone-wiki --include-submodules

This will create a kubernetes_backup directory for the org. Each folder inside will contain the .git contents for the source repo. To restore the code from the .git contents you would move all contents into a .git dir, then run git init inside the dir, then checkout branch e.g.

# inside kubernetes_backup dir, to restore kubelet source code
cd kubelet
mkdir .git
mv -f * .git # moves all contents into .git directory
git init
git checkout master

Reclone Command

The ghorg reclone command is a way to store all your ghorg clone commands in one configuration file and makes calling long or multiple ghorg clone commands easier.

Once your reclone.yaml configuration is set you can call ghorg reclone to clone each entry individually or clone all at once.

To use, add a reclone.yaml to your $HOME/.config/ghorg directory. You can use the following command to set it for you with examples to use as a template

curl https://raw.githubusercontent.com/gabrie30/ghorg/master/sample-reclone.yaml > $HOME/.config/ghorg/reclone.yaml

After updating your reclone.yaml you can run

# To clone all the entries in your reclone.yaml omit any arguments
ghorg reclone
# To run one or more entries you can pass arguments
ghorg reclone kubernetes-sig-staging kubernetes-sig

ghorg reclone example

Troubleshooting

  • If you are having trouble cloning repos. Try to clone one of the repos locally e.g. manually running git clone https://github.com/your_private_org/your_private_repo.git if this does not work, ghorg will also not work. Your git client must first be setup to clone the target repos. If you normally clone using an ssh key use the --protocol=ssh flag with ghorg. This will fetch the ssh clone urls instead of the https clone urls.
  • If you are cloning a large org you may see Error: open /dev/null: too many open files which means you need to increase your ulimits, there are lots of docs online for this. Another solution is to decrease the number of concurrent clones. Use the --concurrency flag to set to lower than 25 (the default)
  • If your GitHub org is behind SSO, you will need to authorize your token, see here
  • If your GitHub Personal Access Token is only finding public repos, give your token all the repos permissions
  • Make sure your $ git --version is >= 2.19.0
  • Check for other software, such as anti-malware, that could interfere with ghorgs ability to create large number of connections, see issue 132. You can also lower the concurrency with --concurrency=n default is 25.
  • To debug yourself you can call ghorg with the GHORG_DEBUG=true env e.g GHORG_DEBUG=true ghorg clone kubernetes --concurrency=1
  • If you've gotten this far and still have an issue feel free to raise an issue

About

Quickly clone an entire org/users repositories into one directory - Supports GitHub, GitLab, Bitbucket, and more 🥚

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Go 87.0%
  • Shell 10.6%
  • Ruby 1.1%
  • Makefile 0.4%
  • HTML 0.4%
  • Dockerfile 0.3%
  • Batchfile 0.2%