XTLS-Iran-TLS

How to make a V2ray (XTLS) Server for bypassing internet censorship in Iran with TLS encryption and Fallback (Anti-probe) to Nginx webserver.

This guide is written for Ubuntu 22.04 LTS but any Debian based distro should also work.

What you need before starting this guide. Prerequisites

• VPS or any other computer / Virtual-Machine running Ubuntu 22.04 LTS or a Debian based distro
• SSH or terminal/console access to your server.
• You need to know your username (the username when you log into Ubuntu)
• A Domain name, You can get a free domain name from https://freedns.afraid.org/ or https://www.noip.com/
• Domain name must be pointed to your IP hosting the server.
• Port 80 and 443 open in your router or/and firewall.

Notes

This is a noob-friendly guide but if you are an experienced linux user you should make a new user without sudo-access to run xray and give right permissions to files.

---

First we need to do some kernel settings for performance and raise ulimits.

sudo nano /etc/sysctl.conf

Copy this at end of then file and save and close.

net.ipv4.tcp_keepalive_time = 90
net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.tcp_fastopen = 3
net.core.default_qdisc=fq
net.ipv4.tcp_congestion_control=bbr
fs.file-max = 65535000

Then run this command to edit limits.conf

sudo nano /etc/security/limits.conf

Copy this at end of the file and save and close.

* soft     nproc          655350
* hard     nproc          655350
* soft     nofile         655350
* hard     nofile         655350
root soft     nproc          655350
root hard     nproc          655350
root soft     nofile         655350
root hard     nofile         655350

Run this to apply settings.

sudo sysctl -p

Install Xray (XTLS)

Create two folders in your username home folder. You should be in this folder when you log in.

mkdir xray

mkdir cert 

Update Ubuntu package list and install unzip.

sudo apt-get update

sudo apt-get install unzip

Change directory to the newly created xray folder.

cd xray/

Download the latest version of XTLS-Xray-Core.

At the time of writing this its 1.7.5.

Link to release page.

https://github.com/XTLS/Xray-core/releases

To download the zip file, we can use the wget command. Then we will unzip the file.

wget https://github.com/XTLS/Xray-core/releases/download/v1.7.5/Xray-linux-64.zip

unzip Xray-linux-64.zip

Remove the Xray-linux-64.zip for easier future updates. See updates

rm Xray-linux-64.zip

Generate UUID for config.json save this for later.

./xray uuid -i Secret

It should look something like this.

92c96807-e627-5328-8d85-XXXXXXXXX

Install xray to boot at startup (Systemd-Service) create file or copy paste xray.service file from this repository

Create service file.

sudo nano /etc/systemd/system/xray.service

[Unit]
Description=XTLS Xray-Core a VMESS/VLESS Server
After=network.target nss-lookup.target
[Service]
# Change to your username <---
User=USERNAME
Group=USERNAME
CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
AmbientCapabilities=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
NoNewPrivileges=true
#                       --->  Change to your username  <---
ExecStart=/home/USERNAME/xray/xray run -config /home/USERNAME/xray/config.json
Restart=on-failure
RestartPreventExitStatus=23
StandardOutput=journal
LimitNPROC=100000
LimitNOFILE=1000000
[Install]
WantedBy=multi-user.target

Remember to edit this file to your own USERNAME! The parts to edit are.

User=USERNAME
Group=USERNAME
ExecStart=/home/USERNAME/xray/xray run -config /home/USERNAME/xray/config.json

Example

User=SasukeFreestyle
Group=SasukeFreestyle
ExecStart=/home/USERNAME/xray/xray run -config /home/SasukeFreestyle/xray/config.json

Reload services and enable auto-start.

sudo systemctl daemon-reload && sudo systemctl enable xray

Install Certbot and generate certificates

sudo snap install core; sudo snap refresh core

sudo snap install --classic certbot

sudo ln -s /snap/bin/certbot /usr/bin/certbot

Now we are going to get SSL/TLS certificates from Certbot for secure communication to the server.

We will make Certbot use a standalone webserver for certificate authorization.

For this you need port 80 open.

sudo certbot certonly --standalone --preferred-challenge http --agree-tos --register-unsafely-without-email

• At this part enter your domain name (replace EXAMPLE.COM)

Please enter the domain name(s) you would like on your certificate (comma and/or
space separated) (Enter 'c' to cancel): EXAMPLE.COM

If no errors occurred you should now have SSL/TLS Certificates inside /etc/letsencrypt/live/EXAMPLE.COM/

Install Nginx from mainline

sudo apt-get install curl gnupg2 ca-certificates lsb-release ubuntu-keyring

curl https://nginx.org/keys/nginx_signing.key | gpg --dearmor | sudo tee /usr/share/keyrings/nginx-archive-keyring.gpg >/dev/null

echo "deb [signed-by=/usr/share/keyrings/nginx-archive-keyring.gpg] \
http://nginx.org/packages/mainline/ubuntu `lsb_release -cs` nginx" \
    | sudo tee /etc/apt/sources.list.d/nginx.list

sudo apt-get update

sudo apt-get install nginx

Next we will remove server tokens from Nginx.

sudo nano /etc/nginx/nginx.conf

Add under sendfile on; in http block and save file.

server_tokens off;

Remove the Nginx default virtualhost configuration.

sudo rm /etc/nginx/conf.d/default.conf

Create a new default.conf and copy contents from default.conf from this repository.

sudo nano /etc/nginx/conf.d/default.conf

Edit the two first server_name EXAMPLE.COM; to your domain name.

server_name EXAMPLE.COM;

Do NOT edit server_name _; in the last server block (at the end of file)

Test Nginx configuration.

sudo nginx -t

If configuration is successful you will see this.

nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

Reload services and enable Nginx auto-start and restart Nginx.

sudo systemctl daemon-reload

sudo systemctl enable nginx

sudo systemctl restart nginx

Xray Configuration

Create a new file called config.json inside xray folder. Copy contents of config.json from this repository to the file.

nano /home/USERNAME/xray/config.json

• Enter your UUID inside "YOUR UUID HERE" Example: "id":"92c96807-e627-5328-8d85-XXXXXXXXX",
• Change your path to your USERNAME
• If all your clients/apps support xtls-rprx-vision you should remove ,none from "flow" If you want backwards-compability to VLESS keep it as it is.

The parts to edit are.

   "inbounds":[
      {
         "listen":"0.0.0.0",
         "port":443,
         "protocol":"vless",
         "settings":{
            "clients":[
               {
                  "id":"YOUR UUID HERE", // Edit to your own UUID
                  "flow":"xtls-rprx-vision,none" // Remove ,none if all your apps/clients support vision. If you want backwards-compability to VLESS keep it as it is.
               }
            ],
            "decryption":"none",
            "fallbacks":[
               {
                  "dest":"/dev/shm/h1.sock",
                  "xver":2
               }
            ]
         },
         "streamSettings":{
            "network":"tcp",
            "security":"tls",
            "tlsSettings":{
               "MinVersion":"1.2",
               "MaxVersion":"1.3",
               "cipherSuites":"TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256:TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256:TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384:TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384:TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256:TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256",
               "alpn":[
                  "http/1.1"
               ],
               "certificates":[
                  {
                     "ocspStapling":3600,
                     "certificateFile":"/home/USERNAME/cert/fullchain.pem", //Edit USERNAME to your username
                     "keyFile":"/home/USERNAME/cert/privkey.pem"  //Edit USERNAME to your username
                  }
               ]
            }
         },

Example

"id":"92c96807-e627-5328-8d85-XXXXXXXXX",
"certificateFile":"/home/SasukeFreestyle/cert/fullchain.pem",
"keyFile":"/home/SasukeFreestyle/cert/privkey.pem"

• If all your clients/apps support xtls-rprx-vision you should remove ,none from "flow"
• You should use vision only for better speeds and to better hide xray from government firewall.

Example

"flow":"xtls-rprx-vision"

• Or If you want backwards-compability to VLESS keep it as it is.

"flow":"xtls-rprx-vision,none"

Configure Certbot renewal script for certificate updates

Create a stop script, this script stops xray when certificates updates.

sudo nano /etc/letsencrypt/renewal-hooks/pre/stop.sh

Copy paste this text to file then save.

#!/bin/sh
systemctl stop xray

Make script executable.

sudo chmod +x /etc/letsencrypt/renewal-hooks/pre/stop.sh

Create a start script

sudo nano /etc/letsencrypt/renewal-hooks/post/start.sh

Edit EXAMPLE.COM and USERNAME to your domain and username. Copy paste this text to file then save.

#!/bin/sh
cp /etc/letsencrypt/live/EXAMPLE.COM/fullchain.pem /home/USERNAME/cert/fullchain.pem
cp /etc/letsencrypt/live/EXAMPLE.COM/privkey.pem /home/USERNAME/cert/privkey.pem
chown USERNAME:USERNAME /home/USERNAME/cert/fullchain.pem
chown USERNAME:USERNAME /home/USERNAME/cert/privkey.pem
systemctl start xray

Make script executable.

sudo chmod +x /etc/letsencrypt/renewal-hooks/post/start.sh

Run a Certbot dry-run, This will copy certificates to your cert folder in your home directory and start xray.

sudo certbot renew --dry-run

Check if xray is running it should now say Active: active (running).

sudo systemctl status xray

● xray.service - XTLS Xray-Core a VMESS/VLESS Server
     Loaded: loaded (/etc/systemd/system/xray.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2023-02-14 18:31:07 CET; 22min ago
   Main PID: 338362 (xray)
      Tasks: 16 (limit: 9365)
     Memory: 279.6M
        CPU: 5min 28.315s

Finished. You now have a XTLS (V2ray) server with real certificates that are valid from all devices!

Visit https://EXAMPLE.COM (Your domain) and see if you can see "Welcome to nginx" website.

To connect to the server using V2rayNG or any other client these are the settings.

In V2rayNG press + then pick "Type manually[VLESS]"

Settings also apply to V2rayN (Windows).

• Remarks/Alias
  • Name of the server, choose whatever name you want.
• Address
  • Domain name of your server. (EXAMPLE.COM)
• Port: 443
• id:
  • Your UUID in config.json
• Flow: xtls-rprx-vision
  • If your software does not have vision, leave flow empty. ,none in flow required.
• Encryption: None
• Network: TCP
• TLS: TLS
• uTLS/Fingerprint: Chrome
• alpn: http/1.1
• allowinsecure: False

• Settings for V2rayN.

Optional (But recommended)

You should make a fake website with random contents and put your HTML files inside /usr/share/nginx/html/ This will make it harder to detect the server and will mask the server better.

How to update to latest version

If a new version of Xray is published and you want to update to the latest version do this easy steps.

• Log into your machine with SSH.

Change directory to your xray folder.

cd xray/

wget the latest release, we will use this example link since latest version is still 1.7.5

wget https://github.com/XTLS/Xray-core/releases/download/v1.7.5/Xray-linux-64.zip

This command will stop the xray service and remove old files and start xray service again.

sudo systemctl stop xray && rm geo* && rm LICENSE && rm README.md && rm xray && unzip Xray-linux-64.zip && sudo systemctl start xray

Make sure xray is running by entering this command.

sudo systemctl status xray

Remove the zipfile.

rm Xray-linux-64.zip

Done!

Roadmap

• Initial release of Instructions
• Create or link to fake website for anti-probe
• Create Dockerfile
• Create install script