ESP8266 RGB Lamp & DHT11 Control Station

This project is an ESP8266-based web server that provides:

• Control over an RGB lamp with multiple color modes and effects.
• Real-time monitoring of temperature and humidity using a DHT11 sensor.

The project includes a built-in WiFi Access Point, allowing devices to connect and control the lamp or monitor sensor data via a user-friendly web interface.

Configure the WiFi settings:

• Open the code and locate the following section:

  const char* ssid = "lamp";       // Access Point Name
  const char* password = "12345678";  // Access Point Password

• Replace "lamp" and "12345678" with your desired SSID and password

Features

RGB Lamp Modes

• Custom Color: Choose your own color via an interactive interface.
• Rainbow Mode: Gradually transitions through a rainbow spectrum.
• Fire Mode: Simulates a warm flickering firelight.
• Warm Mode: Displays a cozy warm light.
• Cold Mode: Simulates a cool blue-white light.
• Water Mode: Mimics the shades of water.
• Bright Mode: Sets the lamp to maximum brightness.
• Hacker Mode: Displays a green blinking effect.
• Random Blink Mode: Randomly blinks different colors.

Temperature & Humidity Display

• View real-time temperature (°C) and humidity (%) on the web interface.

WiFi Access Point

• Create a local network with the ESP8266, allowing easy connection for nearby devices.

Hardware Requirements

1. ESP8266 Board (e.g., NodeMCU or ESP-01)
2. DHT11 Temperature and Humidity Sensor
3. RGB LED or LED strip with the following pins:
   • Red LED pin: D13
   • Green LED pin: D12
   • Blue LED pin: D15
4. Breadboard and jumper wires
5. Power supply for the ESP8266

Software Requirements

• Arduino IDE with the ESP8266 board package installed.
• Required libraries:
  • ESP8266WiFi.h
  • ESP8266WebServer.h
  • DHT.h