Fix #2

QuickPID.cpp

@@ -19,7 +19,7 @@
    reliable defaults, so we need to have the user set them.
  **********************************************************************************/
 QuickPID::QuickPID(int16_t* Input, int16_t* Output, int16_t* Setpoint,
-                   float Kp, float Ki, float Kd, float POn = 1, bool ControllerDirection = 0)
+                   float Kp, float Ki, float Kd, float POn = 1, uint8_t ControllerDirection = 0)
 {
   myOutput = Output;
   myInput = Input;
@@ -41,7 +41,7 @@ QuickPID::QuickPID(int16_t* Input, int16_t* Output, int16_t* Setpoint,
  **********************************************************************************/
 
 QuickPID::QuickPID(int16_t* Input, int16_t* Output, int16_t* Setpoint,
-                   float Kp, float Ki, float Kd, bool ControllerDirection)
+                   float Kp, float Ki, float Kd, uint8_t ControllerDirection)
   : QuickPID::QuickPID(Input, Output, Setpoint, Kp, Ki, Kd, pOn = 1, ControllerDirection = 0)
 {
 
@@ -222,7 +222,7 @@ void QuickPID::SetOutputLimits(int16_t Min, int16_t Max)
   when the transition from manual to auto occurs, the controller is
   automatically initialized
 ******************************************************************************/
-void QuickPID::SetMode(bool Mode)
+void QuickPID::SetMode(uint8_t Mode)
 {
   bool newAuto = (Mode == AUTOMATIC);
   if (newAuto && !inAuto)
@@ -249,7 +249,7 @@ void QuickPID::Initialize()
   know which one, because otherwise we may increase the output when we should
   be decreasing.  This is called from the constructor.
 ******************************************************************************/
-void QuickPID::SetControllerDirection(bool Direction)
+void QuickPID::SetControllerDirection(uint8_t Direction)
 {
   if (inAuto && Direction != controllerDirection)
   {
@@ -283,10 +283,10 @@ float QuickPID::GetTu() {
 float QuickPID::GetTd() {
   return  dispTd;
 }
-bool QuickPID::GetMode() {
+uint8_t QuickPID::GetMode() {
   return  inAuto ? AUTOMATIC : MANUAL;
 }
-bool QuickPID::GetDirection() {
+uint8_t QuickPID::GetDirection() {
   return controllerDirection;
 }
 

QuickPID.h

@@ -18,13 +18,13 @@ class QuickPID
     // commonly used functions ************************************************************************************
 
     // Constructor. Links the PID to Input, Output, Setpoint and initial Tuning Parameters.
-    QuickPID(int16_t*, int16_t*, int16_t*, float, float, float, float, bool);
+    QuickPID(int16_t*, int16_t*, int16_t*, float, float, float, float, uint8_t);
 
     // Overload constructor with proportional mode. Links the PID to Input, Output, Setpoint and Tuning Parameters.
-    QuickPID(int16_t*, int16_t*, int16_t*, float, float, float, bool);
+    QuickPID(int16_t*, int16_t*, int16_t*, float, float, float, uint8_t);
 
     // Sets PID to either Manual (0) or Auto (non-0).
-    void SetMode(bool Mode);
+    void SetMode(uint8_t Mode);
 
     // Performs the PID calculation. It should be called every time loop() cycles. ON/OFF and calculation frequency
     // can be set using SetMode and SetSampleTime respectively.
@@ -47,7 +47,7 @@ class QuickPID
 
     // Sets the Direction, or "Action" of control. DIRECT means the output will increase when error is positive.
     // REVERSE means the opposite. It's very unlikely that this will be needed once it is set in the constructor.
-    void SetControllerDirection(bool);
+    void SetControllerDirection(uint8_t);
 
     // Sets the sample time in milliseconds with which each PID calculation is performed. Default is 100.
     void SetSampleTimeUs(uint32_t);
@@ -59,8 +59,8 @@ class QuickPID
     float GetKu();         // Ultimate Gain
     float GetTu();         // Ultimate Period
     float GetTd();         // Dead Time
-    bool GetMode();
-    bool GetDirection();
+    uint8_t GetMode();
+    uint8_t GetDirection();
 
     // Utility functions ******************************************************************************************
     int analogReadFast(int);
@@ -88,7 +88,7 @@ class QuickPID
     float kpi;             // proportional on error amount
     float kpd;             // proportional on measurement amount
 
-    bool controllerDirection;
+    uint8_t controllerDirection;
 
     int16_t *myInput;      // Pointers to the Input, Output, and Setpoint variables. This creates a
     int16_t *myOutput;     // hard link between the variables and the PID, freeing the user from having

library.json

@@ -1,7 +1,7 @@
 {
   "name": "QuickPID",
   "keywords": "PID, controller, signal",
-  "description": "A fast fixed/floating point PID controller with AutoTune and 8 tuning rules to choose from. This controller can automatically determine and set tuning parameters. An added feature is contolling the mix of Proportional on Error to Proportional on Measurement.",
+  "description": "A fast fixed/floating point PID controller with AutoTune and 9 tuning rules to choose from. This controller can automatically determine and set tuning parameters. An added feature is contolling the mix of Proportional on Error to Proportional on Measurement.",
   "url": "https://github.com/Dlloydev/QuickPID",
   "include": "QuickPID",
   "authors":

library.properties

@@ -2,7 +2,7 @@ name=QuickPID
 version=2.2.1
 author=David Lloyd
 maintainer=David Lloyd <dlloydev@testcor.ca>
-sentence=A fast fixed/floating point PID controller with AutoTune and 8 tuning rules to choose from.
+sentence=A fast fixed/floating point PID controller with AutoTune and 9 tuning rules to choose from.
 paragraph=This controller can automatically determine and set tuning parameters. An added feature is contolling the mix of Proportional on Error to Proportional on Measurement.
 category=Signal Input/Output
 url=https://github.com/Dlloydev/QuickPID