Add Danish translation (#69)

locales/da/common.json

@@ -0,0 +1,9 @@
+{
+  "Built with ♥ by the EdgeTX contributors - <2>source</2>": "Udviklet ♥ af EdgeTX fællessskabet - <2>github</2>",
+  "Dev tools": "Udviklings værktøj",
+  "Donate and support EdgeTX development <2><0></0></2>": "Donation og støtte til EdgeTx udvikling <2><0></0></2>",
+  "Expert mode": "Ekspert tilstand",
+  "Radio firmware": "Radio firmware",
+  "SD Card content": "SD indhold",
+  "settings": "indstillinger"
+}

locales/da/compatibility.json

@@ -0,0 +1,10 @@
+{
+  "<0></0> Missing File System Access API - <3>Docs</3>": "<0></0> File System Access API mangler - <3>Dokumentation</3>",
+  "<0></0> Missing WebUSB API - <3>Docs</3>": "<0></0> WebUSB-API mangler - <3>Dokumentation</3>",
+  "<0></0> We have File System Access API access": "<0></0> Vi har adgang til File System Access API",
+  "<0></0> We have WebUSB API access": "<0></0> Vi har adgang til WebUSB API",
+  "Don't show again": "Vis ikke igen",
+  "Go to app releases": "Gå til app versioner",
+  "You can install the app, or use an update-to-date Chromium based browser": "Du kan installere som app, eller bruge en Chromium baseret browser",
+  "Your browser doesn't support EdgeTX Buddy": "Din browser understøtter ikke EdgeTX Buddy"
+}

locales/da/devtools.json

@@ -0,0 +1,5 @@
+{
+  "Flashing": "Brænde",
+  "PR Builds": "git PR byg",
+  "Unlocker": "Åben enhed"
+}

locales/da/flashing.json

@@ -0,0 +1,111 @@
+{
+  "(Latest)": "(Nyeste)",
+  "Add a device to get started": "Tilføj en enhed for at begynde",
+  "Add new device": "Tilføj ny enhed",
+  "Available devices": "Mulige enheder",
+  "Build": "Byg",
+  "Build finished": "Byg færdigt",
+  "Building": "Bygger",
+  "Building firmware with specified configurations": "Bygger firmware med angivne indstillinger",
+  "Building on server": "Bygger på server",
+  "Built": "Bygget",
+  "Cancel": "Afbryd",
+  "Click here to select firmware file, or drag it here to upload.": "Klik her for at vælge firmware fil, eller træk hertil for at hente fil.",
+  "Cloud": "Sky/Cloud",
+  "Connect": "Forbind",
+  "Connect radio": "Forbind radio",
+  "Connect to DFU interface": "Forbind med DFU interface",
+  "Connected": "Forbundet",
+  "Connecting": "Forbinder",
+  "Connecting to DFU interface and verifying configuration": "Forbinder via DFU interface og beekræfter indstillinger",
+  "Copied to clipboard": "Kopieret til klippebord",
+  "Copy URL": "Kopier URL",
+  "Could not build firmware": "Firmware byg er fejlet",
+  "Could not connect to DFU interface": "Kunne ikke forbinde til DFU interface",
+  "Could not create job: {{message}}": "Kunne ikke oprette job: {{message}}",
+  "Could not download firmware": "Kunne ikke hente firmware",
+  "Could not download firmware: {{message}}": "Kunne ikke hente firmware: {{message}}",
+  "Could not erase existing firmware": "Kunne ikke slette eksisterende firmware",
+  "Could not load commits": "Kunne ikke hente indlæse git commit",
+  "Could not load releases": "Kunne ikke indlæse version",
+  "Could not load targets": "Kunne ikke indlæse mål software",
+  "Could not unlock device: {{message}}": "Kunne ikke låse enhed op: {{message}}",
+  "Could not use firmware": "Kunne ikke anvende firmware",
+  "Could not write new firmware to radio": "Kunne ikke skrive ny firmware",
+  "Created": "Oprettet",
+  "Details": "Detaljer",
+  "Device firmware may be read protected, preventing updates": "Firmware i enhed er måske skrive beskyttet, forhindrer opdatering",
+  "Device successfully unlocked! You will need to re-enter DFU mode to continue flashing": "Enhed låst op ! Du skal igen forbinde via DFU for at fortsætte brænding",
+  "DFU connection active": "DFU forbindelse aktiv",
+  "Done": "Klar",
+  "Download": "Hent",
+  "Download .bin": "Hent .bin",
+  "Download firmware data": "Henter firmware informationer",
+  "Downloaded": "Hentet",
+  "Downloading": "Henter",
+  "Downloading firmware data to be ready for flashing": "Henter firmware informationer til at klargøre til brænding",
+  "Enable firmware updating": "Aktiver firmware opdatering",
+  "Erase": "Slet",
+  "Erased": "Slettet",
+  "Erasing": "Sletter",
+  "Error": "Fejl",
+  "Existing firmware erased": "Nuværende firmware slettet",
+  "Failed": "Fejlet",
+  "Filters": "Filter",
+  "Firmware": "Firmware",
+  "Firmware build completed": "Firmware byg klar",
+  "Firmware data": "Firmware dato",
+  "Firmware downloaded, ready to flash": "Firmware hentet, klart til brænding",
+  "Firmware file saved": "Firmware image gemt",
+  "Firmware version": "Firmware version",
+  "Flash": "Brænding",
+  "Flash via USB": "Brænding via USB",
+  "Flashed": "Brænding færdig",
+  "Flashing": "Brænding igang",
+  "Flashing done": "Brænding klar",
+  "Flashing EdgeTX": "Brænder EdgeTX image",
+  "Go back": "Tilbage",
+  "In queue": "In queue",
+  "Include pre-releases": "Medtag udviklings versioner",
+  "Loading commits...": "Indlæser git commits...",
+  "Loading pull requests...": "Indlæser git Pull Requests...",
+  "Loading releases...": "Indlæser version...",
+  "Local file": "Lokal fil",
+  "Local firmware file should be a binary (.bin)": "En lokal fil skal være en binær fil (.bin)",
+  "New firmware flashed": "Ny firmware image brændt",
+  "Next": "Weiter",
+  "No devices found": "Ingen enhed er fundet",
+  "No firmware built for commit": "Firmware git commit er ikke bygget",
+  "Not a firmware file": "Ikke et firmware image",
+  "Not supported by your browser": "Ikke understøttet af din browser",
+  "Overview & flash": "Oversigt & brænding",
+  "Please check everything is correct before proceeding. Flashing can take a few minutes so please be patient": "Kontroller alt før du fortsætter. Brænding kan tage et par minutter, vær tålmodig",
+  "Please leave this window open whilst your radio is being flashed": "Luk ikke dette vindue, mens din radio opdateres",
+  "Pull request": "git Pull Request",
+  "Radio": "Sender",
+  "Radio model": "Sender model",
+  "Refresh": "Genfrisk",
+  "Remove": "Fjern",
+  "Remove existing firmware": "Fjern eksisterende firmware",
+  "Remove flash protection": "Fjern beskyttelse mod brænding",
+  "Removing existing firmware from radio": "Fjerne eksisternde firmware i radio",
+  "Select a firmware": "Vælg firmware image",
+  "Select commit": "Vælg git commit",
+  "Select commit to load build info": "Vælg git commit for at indlæse informationer",
+  "Select firmware to see available models": "Vælg firmware for at se mulige modeller",
+  "Select firmware version": "Vælg firmware version",
+  "Select pull request": "Vælg git Pull Request",
+  "Select radio model": "Vælg radio model",
+  "Start firmware build": "Start byg af firmware",
+  "Start flashing": "Begynder brænding",
+  "The type of radio you want to flash": "Radio type, som skal opdateres",
+  "The version of EdgeTX to flash": "EdgeTX version, som skal installeres",
+  "These can be built locally or downloaded from the EdgeTX releases": "Disse kan bygges lokalt eller hentes som EdgeTX version",
+  "Unknown firmware": "Ukendt firmware image",
+  "Verifying...": "Bekræfter...",
+  "Write new firmware": "Skriver ny firmware",
+  "Writing new firmware to radio, this could take several minutes": "Skriver nyt firmware image til radio, kan tage flere minutter",
+  "You may now want to <1>setup your SD Card</1>": "Du ønsker nok nu, at <1>indstille SD kort</1>",
+  "You're all set!": "Alt klart!",
+  "Your radio has been flashed with EdgeTX": "Din radio er klar med EdgeTx"
+}

locales/da/sdcard.json

@@ -0,0 +1,9 @@
+{
+  "<0>Step 1.</0> Power on your device, make sure it's not plugged into USB": "<0>Trin 1.</0> Tænd for enhed, kontroller at den ikke er forbundet til USB",
+  "<0>Step 2.</0> Connect your device to the computer via USB, and if prompted select '<2>USB Storage</2>'": "<0>Trin 2.</0> Forbind enhed til pc, og hvis der kommer en prompt vælg '<2>USB masselager</2>'",
+  "<0>Step 3.</0> Once connected, select the devices SD Card via the file explorer to make changes": "<0>Trin 3.</0> Når forbundet, vælg SD kort via file browser, så du kan ændre indhold",
+  "Select SD Card": "Vælg SD kort",
+  "The SD card editor is still in development": "SD kort editor er fortsat i udvikling",
+  "This feature is not supported by your browser": "Disse funktioner understøttes ikke af din browser",
+  "You may notice missing features or bugs, it's recommended to continue using Flasher as your main SD Card tool": "Der kan være mangler eller fejl, så vi anbefaler at du fortsat anvender Brænding som dit primære værktøj til SD kort"
+}

locales/languages.json

@@ -1 +1 @@
-["en", "zh", "de", "es", "fr", "cs", "it", "be", "ru"]
+["en", "zh", "da", "de", "es", "fr", "cs", "it", "be", "ru"]