- Website: http://s-alert.meteorapp.com/
- Demo: http://s-alert-demo.meteorapp.com/
- s-Alert on the Meteor Podcast
- Pure React UI Component
Add package:
meteor add juliancwirko:s-alert
Optionally, add one or more effects:
meteor add juliancwirko:s-alert-scale
meteor add juliancwirko:s-alert-slide
meteor add juliancwirko:s-alert-genie
meteor add juliancwirko:s-alert-jelly
meteor add juliancwirko:s-alert-flip
meteor add juliancwirko:s-alert-bouncyflip
meteor add juliancwirko:s-alert-stackslide
Then place {{> sAlert}} in your main template. Recomended usage:
sAlert can be configured on the client, be sure to put this inside the /client directory because running it on the server will cause it to crash (more about possible configuration options below). The defaults are below:
Meteor.startup(function () {
sAlert.config({
effect: '',
position: 'top-right',
timeout: 5000,
html: false,
onRouteClose: true,
stack: true,
// or you can pass an object:
// stack: {
// spacing: 10 // in px
// limit: 3 // when fourth alert appears all previous ones are cleared
// }
offset: 0, // in px - will be added to first alert (bottom or top - depends of the position in config)
beep: false,
// examples:
// beep: '/beep.mp3' // or you can pass an object:
// beep: {
// info: '/beep-info.mp3',
// error: '/beep-error.mp3',
// success: '/beep-success.mp3',
// warning: '/beep-warning.mp3'
// }
onClose: _.noop //
// examples:
// onClose: function() {
// /* Code here will be executed once the alert closes. */
// }
});
});sAlert is based on a client-only collection. It is called sAlert.collection. Every sAlert method returns the ID of the alert it has just created.
var warningThatWeWantToCloseLater = sAlert.warning('Please register', {timeout: 'none'});
/* ... */
sAlert.close(warningThatWeWantToCloseLater);sAlert.error('Your message', configOverwrite);
sAlert.warning('Your message', configOverwrite);
sAlert.info('Your message', configOverwrite);
sAlert.success('Your message', configOverwrite);
sAlert.close(alertId);
sAlert.closeAll();
And what is configOverwrite? This is an object with all the settings you want to override, on a per-alert basis. For example:
sAlert.error('Boom! Something went wrong!', {effect: 'genie', position: 'bottom-right', timeout: 'none', onRouteClose: false, stack: false, offset: '80px'});This particular error will be displayed in different way.
- scale -
meteor add juliancwirko:s-alert-scale - slide -
meteor add juliancwirko:s-alert-slide - genie -
meteor add juliancwirko:s-alert-genie - jelly -
meteor add juliancwirko:s-alert-jelly - flip -
meteor add juliancwirko:s-alert-flip - bouncyflip -
meteor add juliancwirko:s-alert-bouncyflip - stackslide -
meteor add juliancwirko:s-alert-stackslide
- top-left
- bottom-left
- top-right
- bottom-right
- top (full width)
- bottom (full width)
You can set up it in miliseconds or use the string none.
You can hook a callback to be invoked when the alert closes. This callback will be invoked when the default timeout closes the alert.
sAlert.success('Your message', {onClose: function() {console.log('closing alert...');}});If timeout is set specifically, it respects the setting.
sAlert.success('Your message', {timeout: 1000, onClose: function() {console.log('closing alert in 1000ms...');}});The callback will also be invoked if you specifically close the alert.
var sAlertId = sAlert.success('Your message', {onClose: function() {console.log('closing alert...');}});
sAlert.close(sAlertId);It applies for closeAll as well.
sAlert.success('Your message one', {onClose: function() {console.log('closing alert one...');}});
sAlert.success('Your message two', {onClose: function() {console.log('closing alert two...');}});
sAlert.closeAll();If you want you can use HTML in your message.
sAlert.error('Boom! <br> Something went wrong!', {effect: 'your-effect-name-here', html: true});You can also put it in the main sAlert config.
If you go to another route, in default the alerts should automatically be cleaned up. This works with Iron Router and FlowRouter. However if you want the alerts to persists on route change you should change onRouteClose param in your config (example above).
You can even overwrite it in sAlert methods calls. So you can close only some of the alerts on route change. Example:
sAlert.warning('Opssss!!! No good! Keep me even when the route changes.', {onRouteClose: false, timeout: 10000});
sAlert.info('Be careful and hide me when the route changes.', {onRouteClose: true, timeout: 10000});By default your multiple alerts on the screen will appear one after another with shift on top or bottom. You can disable it by stack param. Just set it to false.
sAlert.info('Opssss!!! I am full width alert without stacking enabled', {position: 'top'; stack: false});You can also put it in the main sAlert config.
There is an option to set up alerts limit on page and spacing between them.
Sometimes when you use long timeouts (or no timeouts) it is better to use configured limit. So when it will be reached all previous alerts will be cleared immediately.
Instead of using stack: true you can pass an object like:
...
stack: {
spacing: 10, // in px
limit: 3
}
...
See full config above.
Remember that if you use stack.spacing configuration you probably might want to use offset too, because the first alert will always have 0px spacing from top or bottom. If you use only stack: true there will be standard 30px spacing between alerts.
If you want you can set up offset for your alerts. This is useful when you have for example some header and you want your alerts to appear below it. You can set this param in pixels. Default is '0';
sAlert.info('Opssss!!! I am displayed below the header which is 70px height', {position: 'top'; offset: '100px'});You can also put it in the main sAlert config.
You can set up your audio 'beeps'. Just configure your audio file path (.mp3 is prefered because it should work in every browser). You can also configure 4 paths for 4 conditions. The best way is to put your audio files in public folde. Check the configuration above for more details.
There is no default audio sample in the package. You should use sound samples which you know that you have the right to use it.
You can override all CSS classes by targeting s-alert-{{alertType}}.s-alert-effect-{{effectType}}. The alert type classes are:
.s-alert-info, .s-alert-success, .s-alert-warning, .s-alert-error
For example, this CSS rule will override the style for .s-alert-error when displayed with the scale effect:
.s-alert-error.s-alert-effect-scale {
background: #bada55; /* your background color here */
color: #fff /* your text color here */
}You can prepare your own effect package. As a reference, look at one of the ready-to-use packages, such as meteor-s-alert-jelly. You can create your own animations, but remember to use the .s-alert-effect-{your-effect-name-here} prefix. Then you can use it like:
sAlert.error('Boom! Something went wrong!', {effect: 'your-effect-name-here'});Or you can place it in the config:
Meteor.startup(function () {
sAlert.config({
effect: 'your-effect-name-here',
position: 'top-right',
timeout: 5000
});
});If you want to have your effect package linked here just let me know.
Here is a default template (it will be included when you use the standard {{> sAlert}}):
If you want to owerwrite it you should remember to be careful with all used helpers. They should remain in place. Here you have an example of overwriting an alert content template (Place it somewhere in your html files, you can name it as you want):
Place {{> sAlert template='sAlertCustom'}} in your main template.
As you can see in a custom sAlertCustom template we have used the sAlertTitle custom helper. Now if you want to pass the value to it you should call one of sAlert functions with the first parameter being an object instead of a message string:
sAlert.info({sAlertIcon: 'asterisk', sAlertTitle: 'My custom sAlert field - the title', message: 'My sAlert message here'}, configOverwrite);You can pass as many fields as you like. Remember to add the corresponding helpers in the template. configOverwrite works here the same as described above. It is of course optional.
Clone it into packages folder and run meteor with:
meteor test-packages --driver-package practicalmeteor:mocha juliancwirko:s-alert
and go to:
http://localhost:3000
Thanks a lot for those who report bugs and request changes (especially @dandv). sAlert keeps getting better.
- React with Webpack + Meteor as a backend only
- s-alert for React
- sGrid
- sId
- sImageBox
- sChat - Open Source Live Chat App
- Scotty Boilerplate
- PostCSS for Meteor
Note: Starting with version 3.0.0 old deprecated APIs are removed
Note: Starting with version 2.0.0 you should also choose and add and effect package. This is a more flexible and lean solution (previously, the effects CSS file contained all effect styles and it was heavy). sAlert will work without effects as well. You can add as many effect packages as you want. Config and usage are the same.
..see CHANGELOG.md file
MIT