reviewdog - A code review dog who keeps your codebase healthy.

reviewdog provides a way to post review comments to code hosting service, such as GitHub, automatically by integrating with any linter tools with ease. It uses an output of lint tools and posts them as a comment if findings are in diff of patches to review.

reviewdog also supports run in the local environment to filter an output of lint tools by diff.

design doc

Table of Contents

• Installation
• Input Format
  • 'errorformat'
  • Available pre-defined 'errorformat'
  • Reviewdog Diagnostic Format (RDFormat)
  • Diff
  • checkstyle format
• Code Suggestions
• reviewdog config file
• Reporters
  • Reporter: Local (-reporter=local) [default]
  • Reporter: GitHub Checks (-reporter=github-pr-check)
  • Reporter: GitHub Checks (-reporter=github-check)
  • Reporter: GitHub PullRequest review comment (-reporter=github-pr-review)
  • Reporter: GitLab MergeRequest discussions (-reporter=gitlab-mr-discussion)
  • Reporter: GitLab MergeRequest commit (-reporter=gitlab-mr-commit)
  • Reporter: Bitbucket Code Insights Reports (-reporter=bitbucket-code-report)
• Supported CI services
  • GitHub Actions
  • Travis CI
  • Circle CI
  • GitLab CI
  • Bitbucket Pipelines
  • Common (Jenkins, local, etc...)
    • Jenkins with Github pull request builder plugin
• Exit codes
• Filter mode
• Articles

Installation

# Install the latest version. (Install it into ./bin/ by default).
$ curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s

# Specify installation directory ($(go env GOPATH)/bin/) and version.
$ curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s -- -b $(go env GOPATH)/bin [vX.Y.Z]

# In alpine linux (as it does not come with curl by default)
$ wget -O - -q https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | sh -s [vX.Y.Z]

Nightly releases

You can also use nightly reviewdog release to try the latest reviewdog improvements every day!

$ curl -sfL https://raw.githubusercontent.com/reviewdog/nightly/master/install.sh | sh -s -- -b $(go env GOPATH)/bin

GitHub Action: reviewdog/action-setup

steps:
- uses: reviewdog/action-setup@v1
  with:
    reviewdog_version: latest # Optional. [latest,nightly,v.X.Y.Z]

homebrew / linuxbrew

You can also install reviewdog using brew:

$ brew install reviewdog/tap/reviewdog
$ brew upgrade reviewdog/tap/reviewdog

Build with go install

$ go install github.com/reviewdog/reviewdog/cmd/reviewdog@latest

Input Format

'errorformat'

reviewdog accepts any compiler or linter result from stdin and parses it with scan-f like 'errorformat', which is the port of Vim's errorformat feature.

For example, if the result format is {file}:{line number}:{column number}: {message}, errorformat should be %f:%l:%c: %m and you can pass it as -efm arguments.

$ golint ./...
comment_iowriter.go:11:6: exported type CommentWriter should have comment or be unexported
$ golint ./... | reviewdog -efm="%f:%l:%c: %m" -diff="git diff FETCH_HEAD"

name	description
%f	file name
%l	line number
%c	column number
%m	error message
%%	the single '%' character
...	...

Please see reviewdog/errorformat and :h errorformat if you want to deal with a more complex output. 'errorformat' can handle more complex output like a multi-line error message.

You can also try errorformat on the Playground!

By this 'errorformat' feature, reviewdog can support any tools output with ease.

Available pre-defined 'errorformat'

But, you don't have to write 'errorformat' in many cases. reviewdog supports pre-defined errorformat for major tools.

You can find available errorformat name by reviewdog -list and you can use it with -f={name}.

$ reviewdog -list
golint          linter for Go source code                                       - https://github.com/golang/lint
govet           Vet examines Go source code and reports suspicious problems     - https://golang.org/cmd/vet/
sbt             the interactive build tool                                      - http://www.scala-sbt.org/
...

$ golint ./... | reviewdog -f=golint -diff="git diff FETCH_HEAD"

You can add supported pre-defined 'errorformat' by contributing to reviewdog/errorformat

Reviewdog Diagnostic Format (RDFormat)

reviewdog supports Reviewdog Diagnostic Format (RDFormat) as a generic diagnostic format and it supports both rdjson and rdjsonl formats.

This rdformat supports rich feature like multiline ranged comments, severity, rule code with URL, and code suggestions.

$ <linter> | <convert-to-rdjson> | reviewdog -f=rdjson -reporter=github-pr-review
# or
$ <linter> | <convert-to-rdjsonl> | reviewdog -f=rdjsonl -reporter=github-pr-review

Example: ESLint with RDFormat

You can use eslint-formatter-rdjson to output rdjson as eslint output format.

$ npm install --save-dev eslint-formatter-rdjson
$ eslint -f rdjson . | reviewdog -f=rdjson -reporter=github-pr-review

Or you can also use reviewdog/action-eslint for GitHub Actions.

Diff

reviewdog supports diff (unified format) as an input format especially useful for code suggestions. reviewdog can integrate with any code suggestions tools or formatters to report suggestions.

-f.diff.strip: option for -f=diff: strip NUM leading components from diff file names (equivalent to 'patch -p') (default is 1 for git diff) (default 1)

$ <any-code-fixer/formatter> # e.g. eslint --fix, gofmt
$ TMPFILE=$(mktemp)
$ git diff >"${TMPFILE}"
$ git stash -u && git stash drop
$ reviewdog -f=diff -f.diff.strip=1 -reporter=github-pr-review < "${TMPFILE}"

Or you can also use reviewdog/action-suggester for GitHub Actions.

If diagnostic tools support diff output format, you can pipe the diff directly.

$ gofmt -s -d . | reviewdog -name="gofmt" -f=diff -f.diff.strip=0 -reporter=github-pr-review
$ shellcheck -f diff $(shfmt -f .) | reviewdog -f=diff

checkstyle format

reviewdog also accepts checkstyle XML format as well. If the linter supports checkstyle format as a report format, you can use -f=checkstyle instead of using 'errorformat'.

# Local
$ eslint -f checkstyle . | reviewdog -f=checkstyle -diff="git diff"

# CI (overwrite tool name which is shown in review comment by -name arg)
$ eslint -f checkstyle . | reviewdog -f=checkstyle -name="eslint" -reporter=github-check

Also, if you want to pass other Json/XML/etc... format to reviewdog, you can write a converter.

$ <linter> | <convert-to-checkstyle> | reviewdog -f=checkstyle -name="<linter>" -reporter=github-pr-check

Code Suggestions

reviewdog supports code suggestions feature with rdformat or diff input. You can also use reviewdog/action-suggester for GitHub Actions.

reviewdog can suggest code changes along with diagnostic results if a diagnostic tools supports code suggestions data. You can integrate reviewdog with any code fixing tools and any code formatter with diff input as well.

Code Suggestions Support Table

Note that not all reporters provide support of code suggestion.

-reporter	Suggestion support
local	NO [1]
github-check	NO [2]
github-pr-check	NO [2]
github-pr-review	OK
gitlab-mr-discussion	NO [1]
gitlab-mr-commit	NO [2]
gerrit-change-review	NO [1]
bitbucket-code-report	NO [2]

• [1] The reporter service support code suggestion feature, but reviewdog does not support it yet. See #678 for the status.
• [2] The reporter service itself doesn't support code suggestion feature.

reviewdog config file

reviewdog can also be controlled via the .reviewdog.yml configuration file instead of "-f" or "-efm" arguments.

With .reviewdog.yml, you can run the same commands both CI service and local environment including editor integration with ease.

.reviewdog.yml

runner:
  <tool-name>:
    cmd: <command> # (required)
    errorformat: # (optional if you use `format`)
      - <list of errorformat>
    format: <format-name> # (optional if you use `errorformat`. e.g. golint,rdjson,rdjsonl)
    name: <tool-name> # (optional. you can overwrite <tool-name> defined by runner key)
    level: <level> # (optional. same as -level flag. [info,warning,error])

  # examples
  golint:
    cmd: golint ./...
    errorformat:
      - "%f:%l:%c: %m"
    level: warning
  govet:
    cmd: go vet -all .
    format: govet
  your-awesome-linter:
    cmd: awesome-linter run
    format: rdjson
    name: AwesomeLinter

$ reviewdog -diff="git diff FETCH_HEAD"
project/run_test.go:61:28: [golint] error strings should not end with punctuation
project/run.go:57:18: [errcheck]        defer os.Setenv(name, os.Getenv(name))
project/run.go:58:12: [errcheck]        os.Setenv(name, "")
# You can use -runners to run only specified runners.
$ reviewdog -diff="git diff FETCH_HEAD" -runners=golint,govet
project/run_test.go:61:28: [golint] error strings should not end with punctuation
# You can use -conf to specify config file path.
$ reviewdog -conf=./.reviewdog.yml -reporter=github-pr-check

Output format for project config based run is one of the following formats.

• <file>: [<tool name>] <message>
• <file>:<lnum>: [<tool name>] <message>
• <file>:<lnum>:<col>: [<tool name>] <message>

Reporters

reviewdog can report results both in local environment and review services as continuous integration.

Reporter: Local (-reporter=local) [default]

reviewdog can find newly introduced findings by filtering linter results using diff. You can pass diff command as -diff arg.

$ golint ./... | reviewdog -f=golint -diff="git diff FETCH_HEAD"

Reporter: GitHub Checks (-reporter=github-pr-check)

github-pr-check reporter reports results to GitHub Checks.

You can change report level for this reporter by level field in config file or -level flag. You can control GitHub status check result with this feature. (default: error)

Level	GitHub Status
info	neutral
warning	neutral
error	failure

There are two options to use this reporter.

Option 1) Run reviewdog from GitHub Actions w/ secrets.GITHUB_TOKEN

Example: .github/workflows/reviewdog.yml

- name: Run reviewdog
  env:
    REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
  run: |
    golint ./... | reviewdog -f=golint -reporter=github-pr-check

See GitHub Actions section too. You can also use public reviewdog GitHub Actions.

Option 2) Install reviewdog GitHub Apps

reviewdog CLI send a request to reviewdog GitHub App server and the server post results as GitHub Checks, because Check API only supported for GitHub App and GitHub Actions.

1. Install reviewdog Apps. https://github.com/apps/reviewdog
2. Set REVIEWDOG_TOKEN or run reviewdog CLI in trusted CI providers.

• Get token from https://reviewdog.app/gh/{owner}/{repo-name}.

$ export REVIEWDOG_TOKEN="<token>"
$ reviewdog -reporter=github-pr-check

Note: Token is not required if you run reviewdog in Travis or AppVeyor.

Caution

As described above, github-pr-check reporter with Option 2 depends on reviewdog GitHub App server. The server is running with haya14busa's pocket money for now and I may break things, so I cannot ensure that the server is running 24h and 365 days.

UPDATE: Started getting support by opencollective and GitHub sponsor. See Supporting reviewdog

You can use github-pr-review reporter or use run reviewdog under GitHub Actions if you don't want to depend on reviewdog server.

Reporter: GitHub Checks (-reporter=github-check)

It's basically same as -reporter=github-pr-check except it works not only for Pull Request but also for commit.

You can create reviewdog badge for this reporter.

Reporter: GitHub PullRequest review comment (-reporter=github-pr-review)

github-pr-review reporter reports results to GitHub PullRequest review comments using GitHub Personal API Access Token. GitHub Enterprise is supported too.

• Go to https://github.com/settings/tokens and generate new API token.
• Check repo for private repositories or public_repo for public repositories.

$ export REVIEWDOG_GITHUB_API_TOKEN="<token>"
$ reviewdog -reporter=github-pr-review

For GitHub Enterprise, set API endpoint by environment variable.

$ export GITHUB_API="https://example.githubenterprise.com/api/v3/"
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need to skip verifying SSL

See GitHub Actions section too if you can use GitHub Actions. You can also use public reviewdog GitHub Actions.

Reporter: GitLab MergeRequest discussions (-reporter=gitlab-mr-discussion)

Required GitLab version: >= v10.8.0

gitlab-mr-discussion reporter reports results to GitLab MergeRequest discussions using GitLab Personal API Access token. Get the token with api scope from https://gitlab.com/profile/personal_access_tokens.

$ export REVIEWDOG_GITLAB_API_TOKEN="<token>"
$ reviewdog -reporter=gitlab-mr-discussion

The CI_API_V4_URL environment variable, defined automatically by Gitlab CI (v11.7 onwards), will be used to find out the Gitlab API URL.

Alternatively, GITLAB_API can also be defined, in which case it will take precedence over CI_API_V4_URL.

$ export GITLAB_API="https://example.gitlab.com/api/v4"
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need to skip verifying SSL

Reporter: GitLab MergeRequest commit (-reporter=gitlab-mr-commit)

gitlab-mr-commit is similar to gitlab-mr-discussion reporter but reports results to each commit in GitLab MergeRequest.

gitlab-mr-discussion is recommended, but you can use gitlab-mr-commit reporter if your GitLab version is under v10.8.0.

$ export REVIEWDOG_GITLAB_API_TOKEN="<token>"
$ reviewdog -reporter=gitlab-mr-commit

Reporter: Gerrit Change review (-reporter=gerrit-change-review)

gerrit-change-review reporter reports result to Gerrit Change using Gerrit Rest APIs.

The reporter supports Basic Authentication and Git-cookie based authentication for reporting results.

Set GERRIT_USERNAME and GERRIT_PASSWORD environment variables for basic authentication, and put GIT_GITCOOKIE_PATH for git cookie based authentication.

$ export GERRIT_CHANGE_ID=changeID
$ export GERRIT_REVISION_ID=revisionID
$ export GERRIT_BRANCH=master
$ export GERRIT_ADDRESS=http://<gerrit-host>:<gerrit-port>
$ reviewdog -reporter=gerrit-change-review

Reporter: Bitbucket Code Insights Reports (-reporter=bitbucket-code-report)

bitbucket-code-report generates the annotated Bitbucket Code Insights report.

For now, only the no-filter mode supported, so the whole project is scanned on every run. Reports are stored per commit and can be viewed per commit from Bitbucket Pipelines UI or in Pull Request. In the Pull Request UI affected code lines will be annotated in the diff, as well as you will be able to filter the annotations by This pull request or All.

If running from Bitbucket Pipelines, no additional configuration is needed (even credentials). If running locally or from some other CI system you would need to provide Bitbucket API credentials:

• For Basic Auth you need to set following env variables: BITBUCKET_USER and BITBUCKET_PASSWORD
• For AccessToken Auth you need to set BITBUCKET_ACCESS_TOKEN

$ export BITBUCKET_USER="my_user"
$ export BITBUCKET_PASSWORD="my_password"
$ reviewdog -reporter=bitbucket-code-report

To post report to Bitbucket Server use BITBUCKET_SERVER_URL variable:

$ export BITBUCKET_USER="my_user"
$ export BITBUCKET_PASSWORD="my_password"
$ export BITBUCKET_SERVER_URL="https://bitbucket.my-company.com"
$ reviewdog -reporter=bitbucket-code-report

Supported CI services

GitHub Actions

Example: .github/workflows/reviewdog.yml

name: reviewdog
on: [pull_request]
jobs:
  reviewdog:
    name: reviewdog
    runs-on: ubuntu-latest
    steps:
      # ...
      - uses: reviewdog/action-setup@v1
        with:
          reviewdog_version: latest # Optional. [latest,nightly,v.X.Y.Z]
      - name: Run reviewdog
        env:
          REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          reviewdog -reporter=github-pr-check -runners=golint,govet
          # or
          reviewdog -reporter=github-pr-review -runners=golint,govet

Example (github-check reporter):

.github/workflows/reviewdog

Only github-check reporter can run on push event too.

name: reviewdog (github-check)
on:
  push:
    branches:
      - master
  pull_request:

jobs:
  reviewdog:
    name: reviewdog
    runs-on: ubuntu-latest
    steps:
      # ...
      - name: Run reviewdog
        env:
          REVIEWDOG_GITHUB_API_TOKEN: ${{ secrets.GITHUB_TOKEN }}
        run: |
          reviewdog -reporter=github-check -runners=golint,govet

Public Reviewdog GitHub Actions

You can use public GitHub Actions to start using reviewdog with ease! 🎉 ▶️ 🎉

• Common

  • reviewdog/action-misspell - Run misspell.

• Text (e.g. Markdown)

  • reviewdog/action-alex - Run alex which catches insensitive, inconsiderate writing. (e.g. master/slave)
  • reviewdog/action-languagetool - Run languagetool.
  • tsuyoshicho/action-textlint - Run textlint
  • tsuyoshicho/action-redpen - Run redpen

• Docker

  • reviewdog/action-hadolint - Run hadolint to lint Dockerfile.

• Env

  • dotenv-linter/action-dotenv-linter - Run dotenv-linter to lint .env files.

• Shell script

  • reviewdog/action-shellcheck - Run shellcheck.

• Go

  • reviewdog/action-staticcheck - Run staticcheck.
  • reviewdog/action-golangci-lint - Run golangci-lint and supported linters individually by golangci-lint.

• JavaScript

  • reviewdog/action-eslint - Run eslint.

• CSS

  • reviewdog/action-stylelint - Run stylelint.

• Vim script

  • reviewdog/action-vint - Run vint.
  • tsuyoshicho/action-vimlint - Run vim-vimlint

• Terraform

  • reviewdog/action-tflint - Run tflint.

• YAML

  • reviewdog/action-yamllint - Run yamllint.

• Ruby

  • reviewdog/action-brakeman - Run brakeman.
  • reviewdog/action-reek - Run reek.
  • reviewdog/action-rubocop - Run rubocop.
  • vk26/action-fasterer - Run fasterer.
  • SennaLabs/action-standardrb - Run standardrb.

• Python

  • wemake-python-styleguide - Run wemake-python-styleguide
  • tsuyoshicho/action-mypy - Run mypy
  • jordemort/action-pyright - Run pyright
  • dciborow/action-pylint - Run pyright

• Kotlin

  • ScaCap/action-ktlint - Run ktlint.

• Android Lint

  • dvdandroid/action-android-lint - Run Android Lint

• Ansible

  • reviewdog/action-ansiblelint - Run ansible-lint

... and more on GitHub Marketplace.

Missing actions? Check out reviewdog/action-template and create a new reviewdog action!

Please open a Pull Request to add your created reviewdog actions here ✨. I can also put your repositories under reviewdog org and co-maintain the actions. Example: action-tflint.

Graceful Degradation for Pull Requests from forked repositories

GITHUB_TOKEN for Pull Requests from forked repository doesn't have write access to Check API nor Review API due to GitHub Actions restriction.

Instead, reviewdog uses Logging commands of GitHub Actions to post results as annotations similar to github-pr-check reporter.

Note that there is a limitation for annotations created by logging commands, such as max # of annotations per run. You can check GitHub Actions log to see full results in such cases.

reviewdog badge

As github-check reporter support running on commit, we can create reviewdog GitHub Action badge to check the result against master commit for example. 🎉

Example:

<!-- Replace <OWNER> and <REPOSITORY>. It assumes workflow name is "reviewdog" -->
[![reviewdog](https://github.com/<OWNER>/<REPOSITORY>/workflows/reviewdog/badge.svg?branch=master&event=push)](https://github.com/<OWNER>/<REPOSITORY>/actions?query=workflow%3Areviewdog+event%3Apush+branch%3Amaster)

Travis CI

Travis CI (-reporter=github-pr-check)

If you use -reporter=github-pr-check in Travis CI, you don't need to set REVIEWDOG_TOKEN.

Example:

install:
  - mkdir -p ~/bin/ && export PATH="~/bin/:$PATH"
  - curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ~/bin

script:
  - reviewdog -conf=.reviewdog.yml -reporter=github-pr-check

Travis CI (-reporter=github-pr-review)

Store GitHub API token by travis encryption keys.

$ gem install travis
$ travis encrypt REVIEWDOG_GITHUB_API_TOKEN=<token> --add env.global

Example:

env:
  global:
    - secure: <token>

install:
  - mkdir -p ~/bin/ && export PATH="~/bin/:$PATH"
  - curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ~/bin

script:
  - >-
    golint ./... | reviewdog -f=golint -reporter=github-pr-review

Examples

• https://github.com/azu/textlint-reviewdog-example

Circle CI

Store REVIEWDOG_GITHUB_API_TOKEN (or REVIEWDOG_TOKEN for github-pr-check) in Environment variables - CircleCI

.circleci/config.yml sample

version: 2
jobs:
  build:
    docker:
      - image: golang:latest
    steps:
      - checkout
      - run: curl -sfL https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh| sh -s -- -b ./bin
      - run: go vet ./... 2>&1 | ./bin/reviewdog -f=govet -reporter=github-pr-review

      # Deprecated: prefer GitHub Actions to use github-pr-check reporter.
      - run: go vet ./... 2>&1 | ./bin/reviewdog -f=govet -reporter=github-pr-check

GitLab CI

Store REVIEWDOG_GITLAB_API_TOKEN in GitLab CI variable.

.gitlab-ci.yml sample

reviewdog:
  script:
    - reviewdog -reporter=gitlab-mr-discussion
    # Or
    - reviewdog -reporter=gitlab-mr-commit

Bitbucket Pipelines

No additional configuration is needed.

bitbucket-pipelines.yml sample

pipelines:
  default:
    - step:
        name: Reviewdog
        image: golangci/golangci-lint:v1.31-alpine
        script:
          - wget -O - -q https://raw.githubusercontent.com/reviewdog/reviewdog/master/install.sh | 
              sh -s -- -b $(go env GOPATH)/bin
          - golangci-lint run --out-format=line-number ./... | reviewdog -f=golangci-lint -reporter=bitbucket-code-report

Common (Jenkins, local, etc...)

You can use reviewdog to post review comments from anywhere with following environment variables.

name	description
CI_PULL_REQUEST	Pull Request number (e.g. 14)
CI_COMMIT	SHA1 for the current build
CI_REPO_OWNER	repository owner (e.g. "haya14busa" for https://github.com/haya14busa/reviewdog)
CI_REPO_NAME	repository name (e.g. "reviewdog" for https://github.com/haya14busa/reviewdog)
CI_BRANCH	[optional] branch of the commit

$ export CI_PULL_REQUEST=14
$ export CI_REPO_OWNER=haya14busa
$ export CI_REPO_NAME=reviewdog
$ export CI_COMMIT=$(git rev-parse HEAD)

and set a token if required.

$ REVIEWDOG_TOKEN="<token>"
$ REVIEWDOG_GITHUB_API_TOKEN="<token>"
$ REVIEWDOG_GITLAB_API_TOKEN="<token>"

If a CI service doesn't provide information such as Pull Request ID - reviewdog can guess it by branch name and commit SHA. Just pass the flag guess:

$ reviewdog -conf=.reviewdog.yml -reporter=github-pr-check -guess

Jenkins with Github pull request builder plugin

• GitHub pull request builder plugin - Jenkins - Jenkins Wiki

$ export CI_PULL_REQUEST=${ghprbPullId}
$ export CI_REPO_OWNER=haya14busa
$ export CI_REPO_NAME=reviewdog
$ export CI_COMMIT=${ghprbActualCommit}
$ export REVIEWDOG_INSECURE_SKIP_VERIFY=true # set this as you need
$ REVIEWDOG_TOKEN="<token>" reviewdog -reporter=github-pr-check
# Or
$ REVIEWDOG_GITHUB_API_TOKEN="<token>" reviewdog -reporter=github-pr-review

Exit codes

By default reviewdog will return 0 as exit code even if it finds errors. If -fail-on-error flag is passed, reviewdog exits with 1 when at least one error was found/reported. This can be helpful when you are using it as a step in your CI pipeline and want to mark the step failed if any error found by linter.

See also -level flag for github-pr-check/github-check reporters. reviewdog will exit with 1 if reported check status is failure as well if -fail-on-error=true.

Filter mode

reviewdog filter results by diff and you can control how reviewdog filter results by -filter-mode flag. Available filter modes are as below.

added (default)

Filter results by added/modified lines.

diff_context

Filter results by diff context. i.e. changed lines +-N lines (N=3 for example).

file

Filter results by added/modified file. i.e. reviewdog will report results as long as they are in added/modified file even if the results are not in actual diff.

nofilter

Do not filter any results. Useful for posting results as comments as much as possible and check other results in console at the same time.

-fail-on-error also works with any filter-mode and can catch all results from any linters with nofilter mode.

Example:

$ reviewdog -reporter=github-pr-review -filter-mode=nofilter -fail-on-error

Filter Mode Support Table

Note that not all reporters provide full support of filter mode due to API limitation. e.g. github-pr-review reporter uses GitHub Review API but it doesn't support posting comment outside diff (diff_context), so reviewdog will use Check annotation as fallback to post those comments [1].

-reporter \ -filter-mode	added	diff_context	file	nofilter
local	OK	OK	OK	OK
github-check	OK	OK	OK	OK
github-pr-check	OK	OK	OK	OK
github-pr-review	OK	OK	Partially Supported [1]	Partially Supported [1]
gitlab-mr-discussion	OK	OK	OK	Partially Supported [2]
gitlab-mr-commit	OK	Partially Supported [2]	Partially Supported [2]	Partially Supported [2]
gerrit-change-review	OK	OK? [3]	OK? [3]	Partially Supported? [2][3]
bitbucket-code-report	NO [4]	NO [4]	NO [4]	OK

• [1] Report results which is outside diff context with Check annotation as fallback if it's running in GitHub actions instead of Review API (comments). All results will be reported to console as well.
• [2] Report results which is outside diff file to console.
• [3] It should work, but not verified yet.
• [4] Not implemented at the moment

Debugging

Use the -tee flag to show debug info.

reviewdog -filter-mode=nofilter -tee

Articles

• reviewdog — A code review dog who keeps your codebase healthy
• reviewdog ♡ GitHub Check — improved automated review experience
• Automated Code Review on GitHub Actions with reviewdog for any languages/tools
• GitHub Actions to guard your workflow

🐦 Author

haya14busa

Contributors

Supporting reviewdog

Become GitHub Sponsor for each contributor or become a backer or sponsor from opencollective.