HAS BEEN MIGRATED TO https://uofi.box.com/s/4tiz5087w0k0o5c8q6ztsot6nda5cbi3
20211030 -- Endurance, TARS mk2
20220507 -- Intrepid I, TARS mk3
20220623 -- Intrepid II, TARS mk3
20221029 -- Intrepid III, Test Flight 1, TARS mk3.1
20230305 -- Intrepid III, Test Flight 2, TARS mk4
20230507 -- Stargazer I, COTS
20230621 -- Intrepid III, Competition Launch, TARS mk4
- Take pictures of ALL components immediately after being recovered. Verify status of all igniters & E-matches AFTER verifying that energetics are disabled.
- Ensure all altimeters are present and functioning
- Download all SD card data to local machine (If applicable)
- Download all COTS altimeter data to local machine
- Plug in altimeters to device with AltOS
- Connect the 2 SWITCH ports with a jumper.
- Connect a compatible battery to the altimeter
- After successful beep sequence, open AltOS.
- Press
Save Flight Data
- Select the appropriate altimeter
- Then download everything.
- Press
Export Data
- Export all
.eeprom
files to.csv
- Retrieve all photos from post-recovery.
- Create a directory with the format
yyyymmdd
- Save ALL SD card data and COTS Altimeter data to new directory
- Create a subdirectory named
photos
- Upload all post-recovery photos to the
photos
subdirectory - Upload the entire
yyyymmdd
directory to https://github.com/ISSUIUC/flight-data/tree/master on a new branch - Edit this file to add a link to the directory and the name of the rocket from the launch to the
Past Flights
section
- Data
flight_computer
- Data retrieved from the rocket. (SRAD)ground_station
- Data transmited from the rocket and logged by the ground station (SRAD)telemetrum
- Data retrieved from telemetrum flight recordings. (Not data logged by Telemetrum transmissions) (COTS)stratologger
- Data retrieved from the Stratologger flight recordings. (COTS)
- Code
parse_data.cpp
- Parse data from a.dat
to a.csv
file.reformat_data.cpp
- Organize data to simplify data headers and reduce clutter.