ports/psoc6: Makefile system rework to avoid unstaged git changes.

Signed-off-by: enriquezgarc <enriquezgarcia.external@infineon.com>

ports/psoc6/Makefile

@@ -1,13 +1,27 @@
-# get active board from mtb-lib makefile
-# mtb-lib makefile set TARGET board by using
-# "mtb_set_bsp" target or targets depending on it
-# as "mtb_init".
+BOARD ?=
+
+# Check if the ModusToolbox setup has been initialized
+# If that is the case, get active board
 MTB_LIB_DIR = mtb-libs
-MTB_LIB_MAKEFILE = $(MTB_LIB_DIR)/Makefile
-BOARD ?= $(shell egrep '^ *TARGET' $(MTB_LIB_MAKEFILE) | sed 's/^.*= *//g' | sed 's/APP_//')
+MTB_LIBS_APP_INFO = $(MTB_LIB_DIR)/build/get_app_info.txt
+ifneq ($(wildcard $(MTB_LIBS_APP_INFO)),)
+	ACTIVE_BOARD = $(shell egrep '^ *MTB_TARGET' $(MTB_LIBS_APP_INFO) | sed 's/^.*= *//g' | sed 's/APP_//')
+endif
+
+# Get active board from mtb-lib previous runs
+# The board is set only after make mtb_init 
+# has been run. 
+ifeq ($(BOARD),)
+    ifeq ($(ACTIVE_BOARD),)
+        $(error ModusToolbox not initialized. Run "make mtb_init BOARD=<target-board>" to configure the environment. )
+    else
+        BOARD = $(ACTIVE_BOARD)
+    endif
+endif
+
 BOARD_DIR  = boards/$(BOARD)
 
-$(info Active PSoC6 board        : $(BOARD))
+$(info PSoC6 board        : $(BOARD))
 
 ifeq ($(wildcard $(BOARD_DIR)/.),)
   $(error Invalid BOARD specified)
@@ -79,7 +93,6 @@ else
   MICROPY_ROM_TEXT_COMPRESSION ?= 1
 endif
 
-
 $(info Compiling in $(CONFIG) mode !)
 
 #ToDo: Post adding af functionality, refactor to minimize dependent variables in py script if possible
@@ -163,7 +176,7 @@ SRC_C = help.c \
 		main.c \
 		mphalport.c \
 		frozen_content.c \
-		$(BUILD)/pins_$(BOARD).c
+		pins_$(BOARD).c
 
 SRC_ASM += shared/runtime/gchelper_thumb1.s
 

ports/psoc6/mtb-libs/Makefile

@@ -42,12 +42,7 @@ MTB_TYPE=COMBINED
 # configurations. If TARGET is manually edited, ensure TARGET_<BSP>.mtb with a
 # valid URL exists in the application, run 'make getlibs' to fetch BSP contents
 # and update or regenerate launch configurations for your IDE.
-TARGET=APP_CY8CPROTO-062-4343W
-
-# # Board dependencies
-# ifeq ($(TARGET),APP_CY8CPROTO-062-4343W)
-# NETWORK_ENABLE = 1
-# endif
+TARGET=APP_$(BOARD)
 
 # Name of application (used to derive name of final linked file).
 #

ports/psoc6/mtb-libs/makefile_mtb.mk

@@ -1,18 +1,17 @@
 # get variable definitions from main makefile
 MTB_LIBS_DIR       = mtb-libs
 MTB_MAIN_MAKEFILE := $(MTB_LIBS_DIR)/Makefile
-MTB_TARGET        := $(shell egrep '^ *TARGET' $(MTB_MAIN_MAKEFILE) | sed 's/^.*= *//g')
 MTB_CONFIG        ?= $(shell egrep '^ *CONFIG' $(MTB_MAIN_MAKEFILE) | sed 's/^.*= *//g')
 
 MTB_LIBS_BUILD_DIR       := $(MTB_LIBS_DIR)/$(BUILD)
-MTB_LIBS_BOARD_BUILD_DIR := $(MTB_LIBS_BUILD_DIR)/$(MTB_TARGET)/$(MPY_MTB_CONFIG)
+MTB_LIBS_BOARD_BUILD_DIR := $(MTB_LIBS_BUILD_DIR)/APP_$(BOARD)/$(MPY_MTB_CONFIG)
 
-MPY_MTB_LIB_NAME          = $(file < $(MTB_LIBS_BOARD_BUILD_DIR)/artifact.rsp)
+MTB_STATIC_LIB_NAME          = $(file < $(MTB_LIBS_BOARD_BUILD_DIR)/artifact.rsp)
 
 $(info MTB_MAIN_MAKEFILE                : $(MTB_MAIN_MAKEFILE))
-$(info MTB_TARGET                       : $(MTB_TARGET))
+$(info MTB_TARGET                       : APP_$(BOARD))
 $(info MTB_CONFIG                       : $(MTB_CONFIG))
-$(info MTB_LIB_NAME                     : $(MPY_MTB_LIB_NAME))
+$(info MTB_LIB_NAME                     : $(MTB_STATIC_LIB_NAME))
 
 $(info MTB_LIBS_BUILD_DIR               : $(MTB_LIBS_BUILD_DIR))
 $(info MTB_LIBS_BOARD_BUILD_DIR         : $(MTB_LIBS_BOARD_BUILD_DIR))
@@ -77,7 +76,7 @@ mtb_deinit: clean
 
 # Some of the configuration variables are passed to the ModusToolbox 
 # Makefile to include/exclude certain middleware libraries and components
-MPY_MTB_MAKE_VARS = MICROPY_PY_NETWORK=$(MICROPY_PY_NETWORK) MICROPY_PY_SSL=$(MICROPY_PY_SSL)
+MPY_MTB_MAKE_VARS = MICROPY_PY_NETWORK=$(MICROPY_PY_NETWORK) MICROPY_PY_SSL=$(MICROPY_PY_SSL) BOARD=$(BOARD)
 
 # build MTB project
 mtb_build:
@@ -96,7 +95,7 @@ mtb_get_build_flags: mtb_build
 	$(eval INC += $(subst -I,-I$(MTB_LIBS_DIR)/,$(MPY_MTB_INCLUDE_DIRS)))
 	$(eval INC += -I$(BOARD_DIR))
 	$(eval MPY_MTB_LIBRARIES = $(file < $(MTB_LIBS_BOARD_BUILD_DIR)/liblist.rsp))
-	$(eval LIBS += $(MTB_LIBS_BOARD_BUILD_DIR)/$(MPY_MTB_LIB_NAME))
+	$(eval LIBS += $(MTB_LIBS_BOARD_BUILD_DIR)/$(MTB_STATIC_LIB_NAME))
 	$(eval CFLAGS += $(shell $(PYTHON) $(MTB_LIBS_DIR)/mtb_build_info.py ccxxflags $(MTB_LIBS_BOARD_BUILD_DIR)/.cycompiler ))
 	$(eval CXXFLAGS += $(CFLAGS))
 	$(eval LDFLAGS += $(shell $(PYTHON) $(MTB_LIBS_DIR)/mtb_build_info.py ldflags $(MTB_LIBS_BOARD_BUILD_DIR)/.cylinker $(MTB_LIBS_DIR)))
@@ -123,7 +122,7 @@ attached_devs:
 	$(info List of attached targets : $(ATTACHED_TARGET_LIST))
 
 ifndef EXT_HEX_FILE
-HEX_FILE = $(MPY_DIR_OF_MAIN_MAKEFILE)/build/firmware.hex
+HEX_FILE = $(BUILD)/firmware.hex
 PROG_DEPS=build
 else
 HEX_FILE = $(EXT_HEX_FILE)