Added info about new 4.2 tag, and precipitation rounding (or lack of!)

README.md

@@ -15,13 +15,17 @@ Home Assistant and a working [OpenEpaper](https://openepaperlink.de/) setup, wit
 
 The scripts assume your Met.no weather sensor is called `weather.home`, your Moon sensor is called `sensor.moon_phase`. There is a service call to `weather.get_forecasts` at the top of the HA configuration file to get the hourly weather, which calls this data variable `weather_home_hourly`. `get_forecasts` is a different response to `get_forecast`, so make sure you are on HA version 2023.12 or greater - it will break if you use `get_forecast`!
 
-## Tag size - 1.54", 2.9" or 4.2"
+## Tag size - 1.54", 2.9" and 4.2"
 I made a 2.9" weather tag (pictured above) but there is also one made for 4.2" by [@svenove](https://github.com/svenove/):
 <img src="4.2-tag.jpg" width="50%" alt="4.2 Epaper Tag using Weatherman data">
 
 I've also added a small 1.54" mini version, which shows the current weather, and the following hour and day ahead.
 <img src="20231207_130735_resized.jpg" width="50%" alt="1.54 Epaper Tag using Weatherman data">
 
+A fully featured "kitchen sink" 4.2" tag that has lots of current weather data, the Sun rising & setting times, an additional day on the daily forecasts, and a lot more info in all the forecasts.
+<img src="20231213_212527_resized.jpg" width="50%" alt="4.2 'Kitchen Sink' Tag using Weatherman data">
+
+
 ## Installation
 * Add font `GothamRnd-Bold.ttf` to `/config/media` Home Assistant (create the folder "media" too).
 * Add template sensor `ha-configuration.yaml` to your configuration file in Home Assistant.
@@ -41,6 +45,13 @@ If you go with a 24h hour display (e.g. 14) - amend your automation yaml file `w
 To change the display of the day names to your prefered language, replace these occurences in the configuration with your own:
 `{{ "%s" % (["Sun","Mon","Tue","Wed","Thu","Fri","Sat"][as_timestamp(state_attr('weather.home', 'forecast')[0].datetime) | timestamp_custom('%w') | int]) }}`
 
+### Precipitation accuracy
+I have removed the rounding for precipitation values (usually in mm). This will add a lot more 0.0, 0.1, 1.2 numbers on your screen. To tidy it up and just have round numbers, just add `| round` filter to any precipitation value in ha-configuration, e.g:
+```
+wm_precipitation_0: >
+          {{ weather_home_hourly['weather.home']['forecast'][0].precipitation | round }}
+```
+
 ### Temperature right now
 If you have an outdoor temperature sensor available in HASS, you could display that for the current temperature instead of the forecasted temperature.
 Replace this with your temperature entity: `state_attr('sensor.weatherman_data_tag','wm_temp_0')`