qualcommax: ipq60xx: add glinet gl-axt1800 support

Hardware: * SoC: Qcom IPQ6000 * RAM: DDR3L 512MB * Flash: 128MB Nand * Ethernet: 3x GbE * WLAN: 2x2 2.4GHz 600Mbps + 2x2 5GHz 1200Mbps (builtin + builtin) * LEDS: 1x white, 1x blue * Buttons: 1x switch, 1x reset * USB: 1x 3.0(Type-A) * SD: 1x microSD * PWM Fan * Power: 12VDC, 2A * UART (4-pin, 2.54 mm pitch) pad on PCB * JTAG (8-pin, 2.54 mm pitch) pad on PCB Installation: * From stock firmware to openwrt firmware: flash the `openwrt-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-factory.ubi` file via uboot * Upgrade "openwrt-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-sysupgrade.bin" if you are already in openwrt. * From openwrt firmware to official: directly flash the official firmware via uboot Signed-off-by: Shi Jiayang <shi05275@163.com>
JiaY-shi · Mar 21, 2024 · 23672ba · 23672ba
1 parent ab86246
commit 23672ba
Show file tree

Hide file tree

Showing 7 changed files with 136 additions and 0 deletions.
diff --git a/package/boot/uboot-envtools/files/qualcommax_ipq60xx b/package/boot/uboot-envtools/files/qualcommax_ipq60xx
@@ -15,6 +15,7 @@ case "$board" in
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
 	;;
 glinet,gl-ax1800|\
+glinet,gl-axt1800|\
 netgear,wax214)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
@@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
 	edgecore_eap102 \
 	edimax_cax1800 \
 	glinet_gl-ax1800 \
+	glinet_gl-axt1800 \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	netgear_lbr20 \
@@ -155,6 +156,7 @@ $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
 $(eval $(call generate-ipq-wifi-package,glinet_gl-ax1800,GL.iNet GL-AX1800))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-axt1800,GL.iNet GL-AXT1800))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-gl-axt1800.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-gl-axt1800.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6000-glinet.dtsi"
+
+/ {
+	model = "GL Technologies, Inc. AXT1800";
+	compatible = "glinet,gl-axt1800", "qcom,ipq6018";
+
+	aliases {
+		sdhc0 = &sdhc_1;
+	};
+
+	V30:V30 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	V18:V18 {
+		compatible = "regulator-fixed";
+		regulator-name = "vqmmc-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+
+&tlmm {
+
+	sd_pins: sd_pins {
+		sd {
+			pins = "gpio62";
+			function = "sd_card";
+			bias-pull-up;
+		};
+		ldo {
+			pins = "gpio66";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	pwm_pins: pwm_pinmux {
+		pwm {
+			pins = "gpio30";
+			function = "pwm13";
+			drive-strength = <8>;
+		};
+	};
+
+	fan_pins: fan_pins {
+		pwr {
+			pins = "gpio29";
+			function = "gpio";
+			bias-pull-up;
+			output-high;
+		};
+		speed {
+			pins = "gpio31";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&soc {
+	fan0: pwm-fan  {
+		compatible = "pwm-fan";
+		pinctrl-0 = <&fan_pins>;
+		pinctrl-names = "default";
+		cooling-min-state = <0>;
+		cooling-max-state = <255>;
+		#cooling-cells = <2>;
+		pwms = <&pwm 1 40000 0>;
+		cooling-levels = <0 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36
+				36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 37 38 39
+				40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
+				60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
+				80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
+				100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
+				120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
+				140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
+				160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179
+				180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199
+				200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
+				220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
+				240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>;
+	};
+};
+
+&pwm{
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+	cd-gpios = <&tlmm 62 1>;
+	sd-ldo-gpios = <&tlmm 66 1>;
+	vqmmc-supply = <&V18>;
+	vmmc-supply = <&V30>;
+	status = "okay";
+};
+
+&wifi {
+	qcom,ath11k-calibration-variant = "GL-iNet-GL-AXT1800";
+};
diff --git a/target/linux/qualcommax/image/ipq60xx.mk b/target/linux/qualcommax/image/ipq60xx.mk
@@ -24,6 +24,19 @@ define Device/glinet_gl-ax1800
 endef
 TARGET_DEVICES += glinet_gl-ax1800
 
+define Device/glinet_gl-axt1800
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL-iNet
+	DEVICE_MODEL := GL-AXT1800
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_DTS_CONFIG := config@cp03-c1
+	SOC := ipq6000
+	DEVICE_PACKAGES := ipq-wifi-glinet_gl-axt1800 kmod-hwmon-core kmod-hwmon-pwmfan
+endef
+TARGET_DEVICES += glinet_gl-axt1800
+
 define Device/netgear_wax214
        $(call Device/FitImage)
        $(call Device/UbiFit)

diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
@@ -17,6 +17,9 @@ ipq60xx_setup_interfaces()
 	glinet,gl-ax1800)
 		ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
 		;;
+	glinet,gl-axt1800)
+		ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
+		;;
 	netgear,wax214)
 		ucidef_set_interfaces_lan_wan "lan"
 		;;

diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
@@ -13,6 +13,7 @@ case "$FIRMWARE" in
 		caldata_extract "0:ART" 0x1000 0x20000
 		;;
 	glinet,gl-ax1800|\
+	glinet,gl-axt1800|\
 	netgear,wax214)
 		caldata_extract "0:art" 0x1000 0x10000
 		;;

diff --git a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
@@ -11,6 +11,7 @@ platform_check_image() {
 platform_do_upgrade() {
 	case "$(board_name)" in
 	glinet,gl-ax1800|\
+	glinet,gl-axt1800|\
 	netgear,wax214)
 		nand_do_upgrade "$1"
 		;;