Skip to content

Commit

Permalink
qualcommax: ipq60xx: add glinet gl-axt1800 support
Browse files Browse the repository at this point in the history 
Hardware:
* SoC: Qcom IPQ6000
* RAM: DDR3L 512MB
* Flash: 128MB Nand
* Ethernet: 3x GbE
* WLAN: 2x2 2.4GHz 600Mbps + 2x2 5GHz 1200Mbps (builtin + builtin)
* LEDS: 1x white, 1x blue
* Buttons: 1x switch, 1x reset
* USB: 1x 3.0(Type-A)
* SD: 1x microSD
* PWM Fan
* Power: 12VDC, 2A
* UART (4-pin, 2.54 mm pitch) pad on PCB
* JTAG (8-pin, 2.54 mm pitch) pad on PCB

Installation:
* From stock firmware to openwrt firmware: flash the `openwrt-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-factory.ubi` file via uboot
* Upgrade "openwrt-qualcommax-ipq60xx-glinet_gl-axt1800-squashfs-sysupgrade.bin" if you are already in openwrt.
* From openwrt firmware to official: directly flash the official firmware via uboot

Signed-off-by: shi jiayang <shi05275@163.com>
  • Loading branch information
@JiaY-shi
JiaY-shi committed Mar 6, 2024
1 parent a092f99 commit 3216d7f
Show file tree
Hide file tree
Showing 7 changed files with 149 additions and 0 deletions.
1 change: 1 addition & 0 deletions package/boot/uboot-envtools/files/qualcommax_ipq60xx
View file
Original file line number Diff line number Diff line change
Expand Up @@ -15,6 +15,7 @@ case "$board" in
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
;;
glinet,gl-ax1800|\
glinet,gl-axt1800|\
netgear,wax214)
idx="$(find_mtd_index 0:appsblenv)"
[ -n "$idx" ] && \
Expand Down
2 changes: 2 additions & 0 deletions package/firmware/ipq-wifi/Makefile
View file
Original file line number Diff line number Diff line change
Expand Up @@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
edgecore_eap102 \
edimax_cax1800 \
glinet_gl-ax1800 \
glinet_gl-axt1800 \
linksys_mx4200 \
linksys_mx5300 \
netgear_lbr20 \
Expand Down Expand Up @@ -156,6 +157,7 @@ $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,glinet_gl-ax1800,GL.iNet GL-AX1800))
$(eval $(call generate-ipq-wifi-package,glinet_gl-axt1800,GL.iNet GL-AXT1800))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
Expand Down
128 changes: 128 additions & 0 deletions target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-gl-axt1800.dts
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,128 @@
/dts-v1/;
/*
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/

#include "ipq6000-glinet.dtsi"

/ {
model = "GL Technologies, Inc. AXT1800";
compatible = "glinet,gl-axt1800", "qcom,ipq6018";

aliases {
sdhc0 = &sdhc_1;
};

V30:V30 {
compatible = "regulator-fixed";
regulator-name = "vmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};

V18:V18 {
compatible = "regulator-fixed";
regulator-name = "vqmmc-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};


&tlmm {

sd_pins: sd_pins {
sd {
pins = "gpio62";
function = "sd_card";
bias-pull-up;
};
ldo {
pins = "gpio66";
function = "gpio";
bias-pull-up;
};
};

pwm_pins: pwm_pinmux {
pwm {
pins = "gpio30";
function = "pwm13";
drive-strength = <8>;
};
};

fan_pins: fan_pins {
pwr {
pins = "gpio29";
function = "gpio";
bias-pull-up;
output-high;
};
speed {
pins = "gpio31";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
};

&soc {
fan0: pwm-fan {
compatible = "pwm-fan";
pinctrl-0 = <&fan_pins>;
pinctrl-names = "default";
cooling-min-state = <0>;
cooling-max-state = <255>;
#cooling-cells = <2>;
pwms = <&pwm 1 40000 0>;
cooling-levels = <0 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36
36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 37 38 39
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179
180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219
220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>;
};
};

&pwm{
pinctrl-0 = <&pwm_pins>;
pinctrl-names = "default";
status = "okay";
};

&sdhc_1 {
pinctrl-0 = <&sd_pins>;
pinctrl-names = "default";
cd-gpios = <&tlmm 62 1>;
sd-ldo-gpios = <&tlmm 66 1>;
vqmmc-supply = <&V18>;
vmmc-supply = <&V30>;
status = "okay";
};

&wifi {
qcom,ath11k-calibration-variant = "GL-iNet-AXT1800";
};
13 changes: 13 additions & 0 deletions target/linux/qualcommax/image/ipq60xx.mk
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,6 +24,19 @@ define Device/glinet_gl-ax1800
endef
TARGET_DEVICES += glinet_gl-ax1800

define Device/glinet_gl-axt1800
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := GL-iNet
DEVICE_MODEL := GL-AXT1800
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@cp03-c1
SOC := ipq6000
DEVICE_PACKAGES := ipq-wifi-glinet_gl-axt1800
endef
TARGET_DEVICES += glinet_gl-axt1800

define Device/netgear_wax214
$(call Device/FitImage)
$(call Device/UbiFit)
Expand Down
3 changes: 3 additions & 0 deletions target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
View file
Original file line number Diff line number Diff line change
Expand Up @@ -17,6 +17,9 @@ ipq60xx_setup_interfaces()
glinet,gl-ax1800)
ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
;;
glinet,gl-axt1800)
ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
;;
netgear,wax214)
ucidef_set_interfaces_lan_wan "lan"
;;
Expand Down
1 change: 1 addition & 0 deletions target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
View file
Original file line number Diff line number Diff line change
Expand Up @@ -13,6 +13,7 @@ case "$FIRMWARE" in
caldata_extract "0:ART" 0x1000 0x20000
;;
glinet,gl-ax1800|\
glinet,gl-axt1800|\
netgear,wax214)
caldata_extract "0:art" 0x1000 0x10000
;;
Expand Down
1 change: 1 addition & 0 deletions target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11,6 +11,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
glinet,gl-ax1800|\
glinet,gl-axt1800|\
netgear,wax214)
nand_do_upgrade "$1"
;;
Expand Down

0 comments on commit 3216d7f

Please sign in to comment.