Skip to content

A simple perl interface for reading and writing RF Touchstone files (also known as ".sNp" files).

License

Notifications You must be signed in to change notification settings

KJ7LNW/perl-PDL-IO-Touchstone

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

93 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

NAME

PDL::IO::Touchstone - Read and manipulate Touchstone .s2p (and .sNp) files.

DESCRIPTION

A simple interface for reading and writing RF Touchstone files (also known as ".sNp" files). Touchstone files contain complex-valued RF sample data for a device or RF component with some number of ports. The data is (typically) measured by a vector network analyzer under stringent test conditions.

The resulting files are usually provided by manufacturers so RF design engineers can estimate signal behavior at various frequencies in their circuit designs. Examples of RF components include capacitors, inductors, resistors, filters, power splitters, etc.

This PDL::IO::Touchstone module is very low-level and returns lots of variables to keep track of. Instead, I recommend that you use RF::Component module for an object-oriented approach which encapsulates the data returned by rsnp() and will, most likely, simplify your RF component implementation.

SYNOPSIS

    use PDL::IO::Touchstone;

    # Read input matrix:
    ($f, $m, $param_type, $z0, $comments, $fmt, $funit, $orig_f_unit) =
            rsnp('input-file.s2p', { units => 'MHz' });

    # Write output file:
    wsnp('output-file.s2p',
            $f, $m, $param_type, $z0, $comments, $fmt, $from_hz, $to_hz);

You can reproduce the same output file from an input as follows:

    @data = rsnp('input-file.s2p');
    wsnp('output-file.s2p', @data);

You may convert between output formats or frequency scale by changing the $fmt and $to_hz fields when writing:

    @data = rsnp('input-file.s2p');
    $data[5] = 'DB'; # $fmt
    $data[7] = 'MHz' # $to_hz in wsnp() or $orig_f_unit from rsnp().
    wsnp('output-file.s2p', @data);

Note that you may change neither $param_type nor $z0 unless you have done your own matrix transform from one parameter type (or impedance) to another. This is because while wsnp knows how to convert between RA, MA, and DB formats, it does not manipulate the matrix to convert between parameter types (or impedances). Use the P_to_Q() functions below to transform between matrix types.

IO Functions

rsnp($filename, $options) - Read touchstone file

Arguments:

  • $filename - the file to read
  • $options - A hashref of options:
    • units: Hz, KHz, MHz, GHz, or THz.

      Units may specify one of Hz, KHz, MHz, GHz, or THz. The resulting $f vector will be scaled to the frequency format you specify. If you do not specify a format then $f will be scaled to Hz such that a value of 1e6 in the $f vector is equal to 1 MHz.

    • freq_min_hz, freq_max_hz, freq_count: see m_interpolate()

      If these options are passed then the matrix ($m) and frequency ($f) PDLs returned by rsnp() will have been interpolated by m_interpolate().

Return values

The first set of parameters ($f, $m, $param_type, $z0) are required to properly utilize the data loaded by rsnp():

  • $f - A (M) vector piddle of input frequencies where M is the number of frequencies.

  • $m - A (N,N,M) piddle of X-parameter matrices where N is the number of ports and M is the number of frequencies.

    These matrixes have been converted from their 2-part RI/MA/DB input format and are ready to perform computation. Matrix values (S11, etc) use PDL's native complex values.

  • $param_type - one of S, Y, Z, H, G, T, or A that indicates the matrix parameter type.

    Note that T and A are not officially supported Touchstone formats, but you can still load them with this module (but it is up to you to know how to use them).

  • $z0 - The characteristic impedance reference used to collect the measurements.

The remaining parameters ($comments, $fmt, $funit) are useful only if you wish to re-create the original file format by calling wsnp():

  • $comments - An ARRAY-ref of full-line comments provided at the top of the input file.

  • $fmt - The format of the input file, one of:

    • RI - Real/imaginary format
    • MA - Magnitude/angle format
    • DB - dB/angle format
  • $funit - The frequency unit used by the $f vector

    The $funit value is typically 'Hz' unless you overrode the frequency scaling unit with $options in your call to rsnp(). If you specified a unit the $funit will use that unit so a call to wsnp() will re-create the original touchstone file.

  • $orig_funit - The frequency unit used by the original input file.

rsnp_fh($fh, $options) - Read touchstone file

This is the same as rsnp except that it takes a file handle instead of a filename. Additionally, $options accepts the following additional values:

  • filename - the original filename to facilitate more verbose error output.

  • EOF_REGEX - a regular expression that, when matched, will cause rsnp_fh to stop reading data.

    This is used by PDL::IO::MDIF when loading multiple touchstone files from a single MDIF file.

wsnp($filename, $f, $m, $param_type, $z0, $comments, $fmt, $from_hz, $to_hz)

Arguments

Except for $filename (the output file), the arguments to wsnp() are the same as those returned by rsnp().

When writing it is up to you to maintain consistency between the output format and the data being represented. Except for complex value representation in $fmt and frequency scale in $f, this PDL::IO::Touchstone module will not make any mathematical transform on the matrix data.

Changing $to_hz will modify the frequency format in the resultant Touchstone file, but the represented data will remain correct because Touchstone knows how to scale frequencies.

Roughly speaking this should create an identical file to the input:

    wsnp('output.s2p', rsnp('input.s2p'));

However, there are a few output differences that may occur:

  • Floating point rounding during complex format conversion
  • Same-line "suffix comments" are stripped
  • The order of comments and the "# format" line may be changed. wsnp() will write comments before the "# format" line.
  • Whitespace may differ in the output. Touchstone specifies any whitespace as a field delimiter and this module uses tabs as delimiters when writing output data.

wsnp_fh($fh, $f, $m, $param_type, $z0, $comments, $fmt, $from_hz, $to_hz)

Same as wsnp() except that it takes a file handle instead of a filename. Internally wsnp() uses wsnp_fh() and wsnp_fh() can be useful for building MDF files, however MDF files are much more complicated and outside of this module's scope. Consult the "SEE ALSO" section for more about MDFs and optimizing circuits.

S-Parameter Conversion Functions

  • Each matrix below is in the (N,N,M) format where N is the number of ports and M is the number of frequencies.
  • The value of $z0 in the conversion functions may be complex-valued and is represented as either:
      • A perl scalar value: all ports have same impedance
      • A 0-dim pdl like pdl( 5+2*i() ): all ports have same impedance
      • A 1-dim single-element pdl like pdl( [5+2*i()] ): all ports have same impedance
      • A 1-dim pdl representing the characteristic impedance at each port: ports may have different impedances

$Y = s_to_y($S, $z0): Convert S-parameters to Y-parameters.

  • $S: The S-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $Y: The resultant Y-parameter matrix

$S = y_to_s($Y, $z0): Convert Y-parameters to S-parameters.

  • $Y: The Y-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $S: The resultant S-parameter matrix

$Z = s_to_z($S, $z0): Convert S-parameters to Z-parameters.

  • $S: The S-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $Z: The resultant Z-parameter matrix

$S = z_to_s($Z, $z0): Convert Z-parameters to S-parameters.

  • $Z: The Z-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $S: The resultant S-parameter matrix

$ABCD = s_to_abcd($S, $z0): Convert S-parameters to ABCD-parameters.

  • $S: The S-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $ABCD: The resultant ABCD-parameter matrix

$S = abcd_to_s($ABCD, $z0): Convert ABCD-parameters to S-parameters.

  • $ABCD: The ABCD-parameter matrix
  • $z0: Characteristic impedance (see above).
  • $S: The resultant S-parameter matrix

S-Parameter Calculation Functions

All functions prefixed with "s_" require an S-parameter matrix.

$z0n = s_port_z($S, $z0, $n) - Return the complex port impedance vector for each frequency

    • $S: S parameter matrix
    • $z0: vector of reference impedances at each port (from rsnp)
    • $n: the port we want.

In a 2-port, this will provide the input or output impedance as follows:

$z_in  = s_port_z($S, 50, 1);
$z_out = s_port_z($S, 50, 2);

Note that $z_in and $z_out are the PDL vectors for the input or output impedance at each frequency in $f. (NB, $f is not actually needed for the calculation.)

Y-Parameter Calculation Functions

All functions prefixed with "y_" require a Y-parameter matrix.

These functions are intended for use with 2-port matrices---but if you know what you are doing they may work for higher-order matrices as well.

Unless otherwise indicated:

  • $Y is a set Y-parameter matrices (one for each frequency), either loaded directly from a Y-formatted .s2p file or converted via s_to_y or similar functions.
  • $f_hz is a vector of frequencies in Hz (one for each Y-matrix in $Y); $f_hz is assumed to be sorted in ascending order and correspond to each Mth element in $Y of dimension N,N,M where N is the number of ports and M is the number of sample frequencies.

$C = y_capacitance($Y, $f_hz) - Return a vector of capacitance for each frequency in Farads (F)

$C = y_cap_pF($Y, $f_hz) - Return a vector of capacitance it each frequency in picofarads (pF)

$L = y_inductance($Y, $f_hz) - Return a vector of inductance for each frequency in Henrys (H)

$L = y_ind_nH($Y, $f_hz) - Return a vector of inductance for each frequency in nanohenrys (nH)

$Qc = y_qfactor_c($Y, $f_hz) - Return the capacitive Q-factor vector for each frequency

Note that all inductive values are zeroed.

$Ql = y_qfactor_l($Y, $f_hz) - Return the inductive Q-factor vector for each frequency

Note that all capacitive values are zeroed.

$X = y_reactance($Y, $f_hz) - Return a vector of total reactance for each frequency

This is the same as (Xl - Xc).

$Xc = y_reactance_c($Y, $f_hz) - Return a vector of capacitive reactance for each frequency

$Xl = y_reactance_l($Y, $f_hz) - Return a vector of inductive reactance for each frequency

$R = y_resistance($Y) - Return the equivalent series resistance (ESR) in Ohms

$R = y_esr($Y, $f_hz) - An alias for y_resistance.

@srf_list_hz = y_srf($Y, $f_hz) - Return the component's self-resonant frequencies (SRF)

To calculate SRF, reactance is evaluated at each frequency. If the next frequency being evaulated has an opposite sign (ie, going from capacitive to inductive reactance) then that previous frequency is selected as an SRF.

Return value:

  • List context: Return the list of SRF's in ascending order, or an empty list if no SRF is found.
  • Scalar context: Return the lowest-frequency SRF, or undef if no SRF is found.

$f_hz = y_srf_ideal($Y, $f_hz) - Return the component's first self-resonant frequency

Notice: In almost all cases you will want y_srf instead of y_srf_ideal.

This is included for ideal Y-matrices only and may not be accurate. While the equation is a classic SRF calculation (1/(2*pi*sqrt(LC)), SRF should scan the frequency lines as follows: "The SRF is determined to be the frequency at which the insertion (S21) phase changes from negative through zero to positive." [ https://www.coilcraft.com/getmedia/8ef1bd18-d092-40e8-a3c8-929bec6adfc9/doc363_measuringsrf.pdf ]

Circuit Composition

$Y_pp = y_parallel($Y1, $Y2, [...]) - Compose a parallel circuit

For example, if $Y1 and $Y2 represent a 100pF capacitor, then $Y_pp will represent a ~200pF capacitor. Parameters and return value must be Y matrices converted by a function like s_to_y.

$ABCD_ss = abcd_series($ABCD1, $ABCD2, [...]) - Compose a series circuit

For example, if $ABCD1 and $ABCD2 represent a 100pF capacitor, then $ABCD_ss will represent a ~50pF capacitor. Parameters and return value must be ABCD matrices converted by a function like s_to_abcd.

Helper Functions

$n = n_ports($S) - return the number of ports represented by the matrix.

Given any matrix (N,N,M) formatted matrix, this function will return N.

($f_new, $m_new) = m_interpolate($f, $m, $args) - Interpolate $m to a different frequency set

This function rescales the X-parameter matrix ($m) and frequency set ($f) to fit the requested frequency bounds. This function returns $f and $m without interpolation if no $args are passed.

PDL Frequency-Range Specification

If $args is a PDL object then it defines the frequencies that will be used for interpolation in Hz. The values are used verbatim, no additional processing is performed.

Scalar Frequency-Range Specification

The value of $args may be one of:

  • A scalar float or string.
  • An ARRAY reference. If using an ARRAY reference then the array will be concatenated into a comma-separated string and used as follows:

Each range is split on a comma as follows (whitespace is ignored):

($f_new, $S_new) = m_interpolate($f, $S, "1e6, 6e6-9e6 x4, 10e6 += 1e6 x3");

# or as an arrayref of strings and floats:
($f_new, $S_new) = m_interpolate($f, $S, [ 1e6, '6e6-9e6 x4', '10e6 += 1e6 x3' ]);

Which produces the following frequency selection each in MHz because of the e6 suffix:

    1, 6, 7, 8, 9, 10, 11, 12
  • N - The exact frequency in Hz
  • N - M xC - Select C frequencies from N to M (inclusive) in Hz. Thus, 6e6-9e6x4 produces the frequencies 6, 7, 8, 9 MHz because of the e6 suffix. Values for N and M may be floating-point valued, but C must be an integer.
  • N += SxC - Select C frequencies starting at N and stepping by S in Hz. Thus, 10e6 += 1e6x3 produces the frequencies 10, 11, 12 in MHz because of the e6 suffix. Values for N and S may be floating-point valued, but C must be an integer.

Hash Frequency-Range Specification

This example will return the interpolated $S_new and $f_new with 10 frequency samples from 100 to 1000 MHz (inclusive):

# or using Scalar Frequency-Range Specification as part of the hash:
($f_new, $S_new) = m_interpolate($f, $S,
    { freq_range => '100e6 - 1000e6 x10',
      quiet => 1 # optional
    } )
  • freq_range: This specifies a scalar or ARRAY or PDL reference as defined in "Scalar Frequency-Range Specification". A hash format is useful for additional options such as quiet and may be extended further in the future.
  • quiet: suppress warnings when interpolating beyond the available frequency range

$max_diff = f_uniformity($f) - Return maximum frequency deviation.

Return the maximum difference between an ideal uniformly-spaced frequency set and the frequency set provided. This is used internally by f_is_uniform(). For example:

0.0 == f_uniformity(pdl [ 1, 2, 3  , 4 ]);
0.5 == f_uniformity(pdl [ 1, 2, 2.5, 4 ]);

$bool = f_is_uniform($f, $tolerance_hz) - Return true if the frequency set is uniform

Return true if the provided frequency set is uniform within a Hz value. We assume $f is provided in Hz, so adjust $tolerance_hz accordingly if $f is in a different unit.

@vecs = m_to_pos_vecs($m) - Convert N,N,M piddle to row-ordered index slices.

Converts a NxNxM pdl where M is the number of frequency samples to a N^2-length list of M-sized vectors, each representing a row-ordered position in the NxN matrix. ROW ORDERED! @sivoais on irc.perl.org/#pdl calls these "index slices".

This enables mutiplying vector positions for things like 2-port S-to-T conversion.

For example:

    my ($S11, $S12, $S21, $S22) = m_to_pos_vecs($S)

    $T11 = -$S->det / $S21
    $T12 = ...
    $T21 = ...
    $T22 = ...

See also the inverse pos_vecs_to_m function.

$m = pos_vecs_to_m(@vecs) - Convert row-ordered index slices to an N,N,M piddle.

This is the inverse of m_to_pos_vecs, here is the identity transform:

    $m = pos_vecs_to_m(m_to_pos_vecs($m))

For example, re-compose $T from the m_to_pos_vecs example.

    $T = pos_vecs_to_m($T11, $T12, $T21, $T22)

%h = rsnp_list_to_hash(rsnp(...)) - Create a named hash from the return values of rsnp

It is sometimes more familiar and readable to work with a hash of names instead of an index of arrays. This function converts the return value of rsnp into a hash with the following fields. The [n] values are the array index order into the list that rsnp returns.

%h = rsnp_list_to_hash(rsnp($filename, ...));

%h = rsnp_list_to_hash(rsnp_fh($filehandle, ...));

print "$h{z0_ref}\n";
  • [0] freqs
  • [1] m
  • [2] param_type
  • [3] z0_ref
  • [4] comments
  • [5] output_fmt
  • [6] funit
  • [7] orig_f_unit

%h = rsnp_hash_to_list(rsnp_hash(...)) - Create a list from rsnp_hash

This is the inverse of rsnp_list_to_hash.

%h = rsnp_hash(...) - Same as rsnp but returns a hash.

See hash elements in rsnp_list_to_hash

%h = rsnp_fh_hash(...) - Same as rsnp_fh but returns a hash.

See hash elements in rsnp_list_to_hash

wsnp_hash(%h) - Same as wsnp but takes a hash.

See hash elements in rsnp_hash_to_list

wsnp_fh_hash(%h) - Same as wsnp_fh but takes a hash.

See hash elements in rsnp_hash_to_list

SEE ALSO

AUTHOR

Originally written at eWheeler, Inc. dba Linux Global Eric Wheeler to transform .s2p files and build MDF files to optimize with Microwave Office for amplifer impedance matches.

COPYRIGHT

Copyright (C) 2022 eWheeler, Inc. https://www.linuxglobal.com/

This module is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This module is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this module. If not, see <http://www.gnu.org/licenses/>.

About

A simple perl interface for reading and writing RF Touchstone files (also known as ".sNp" files).

Resources

License

Stars

Watchers

Forks

Packages

No packages published