Merge branch 'main' into add-and-link-error-codes

OpenCL_C.txt

@@ -570,7 +570,7 @@ endif::cl_khr_subgroup_ballot[]
 
 ifdef::cl_khr_subgroup_clustered_reduce[]
 [[cl_khr_subgroup_clustered_reduce,cl_khr_subgroup_clustered_reduce]]
-==== Clustered Reductions
+==== Sub-Group Clustered Reductions
 
 The `cl_khr_subgroup_clustered_reduce` extension adds support for clustered
 reductions that operate on a subset of work items in the sub-group.
@@ -600,7 +600,7 @@ endif::cl_khr_subgroup_extended_types[]
 
 ifdef::cl_khr_subgroup_non_uniform_arithmetic[]
 [[cl_khr_subgroup_non_uniform_arithmetic,cl_khr_subgroup_non_uniform_arithmetic]]
-==== Built-in Non-Uniform Arithmetic Functions for Sub-Groups
+==== Sub-Group Non-Uniform Arithmetic
 
 The `cl_khr_subgroup_non_uniform_arithmetic` extension adds the ability to
 use some sub-group functions within non-uniform flow control, including
@@ -620,7 +620,7 @@ endif::cl_khr_subgroup_non_uniform_arithmetic[]
 
 ifdef::cl_khr_subgroup_non_uniform_vote[]
 [[cl_khr_subgroup_non_uniform_vote,cl_khr_subgroup_non_uniform_vote]]
-==== Built-in Non-Uniform Vote and Election Functions for Sub-Groups
+==== Sub-Group Non-Uniform Vote and Election Functions
 
 The `cl_khr_subgroup_non_uniform_vote` extension adds the ability to elect a
 single work item from a sub-group to perform a task and to hold votes among
@@ -651,7 +651,7 @@ endif::cl_khr_subgroup_rotate[]
 
 ifdef::cl_khr_subgroup_shuffle[]
 [[cl_khr_subgroup_shuffle,cl_khr_subgroup_shuffle]]
-==== General Purpose Shuffles
+==== Sub-Group General Purpose Shuffles
 
 The `cl_khr_subgroup_shuffle` extension adds additional ways to exchange
 data among work items in a sub-group.
@@ -665,7 +665,7 @@ endif::cl_khr_subgroup_shuffle[]
 
 ifdef::cl_khr_subgroup_shuffle_relative[]
 [[cl_khr_subgroup_shuffle_relative,cl_khr_subgroup_shuffle_relative]]
-==== Relative Shuffles
+==== Sub-Group Relative Shuffles
 
 The `cl_khr_subgroup_shuffle_relative` extension adds specialized ways to
 exchange data among work items in a sub-group that may perform better on
@@ -8141,7 +8141,7 @@ This section specifies each general kind.
 
 
 [[atomic_store]]
-===== *The atomic_store Functions*
+===== The atomic_store Functions
 
 [open,refpage='atomic_store',desc='The atomic_store Functions',type='freeform',spec='clang',anchor='atomic_store',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8212,7 +8212,7 @@ feature.
 
 
 [[atomic_load]]
-===== *The atomic_load Functions*
+===== The atomic_load Functions
 
 [open,refpage='atomic_load',desc='The atomic_load Functions',type='freeform',spec='clang',anchor='atomic_load',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8276,7 +8276,7 @@ feature.
 
 
 [[atomic_exchange]]
-===== *The atomic_exchange Functions*
+===== The atomic_exchange Functions
 
 [open,refpage='atomic_exchange',desc='The atomic_exchange Functions',type='freeform',spec='clang',anchor='atomic_exchange',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8348,7 +8348,7 @@ feature.
 
 
 [[atomic_compare_exchange]]
-===== *The atomic_compare_exchange Functions*
+===== The atomic_compare_exchange Functions
 
 [open,refpage='atomic_compare_exchange',desc='The atomic_compare_exchange Functions',type='freeform',spec='clang',anchor='atomic_compare_exchange',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8669,7 +8669,7 @@ feature.
 
 
 [[atomic_fetch_key]]
-===== *The atomic_fetch and modify Functions*
+===== The atomic_fetch and modify Functions
 
 [open,refpage='atomic_fetch_key',desc='The atomic_fetch and modify Functions',type='freeform',spec='clang',anchor='atomic_fetch_key',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8772,7 +8772,7 @@ feature.
 
 
 [[atomic_flag]]
-===== *Atomic Flag Type and Operations*
+===== Atomic Flag Type and Operations
 
 [open,refpage='atomic_flag',desc='Atomic Flag Type and Operations',type='freeform',spec='clang',anchor='atomic_flag',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -8800,7 +8800,7 @@ global atomic_flag guard = ATOMIC_FLAG_INIT;
 
 
 [[atomic_flag_test_and_set]]
-===== *The atomic_flag_test_and_set Functions*
+===== The atomic_flag_test_and_set Functions
 
 [open,refpage='atomicFlagTestAndSet',desc='The atomic_flag_test_and_set Functions',type='freeform',spec='clang',anchor='atomic_flag_test_and_set',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_init atomic_load atomic_store atomic_work_item_fence',alias='atomic_flag_test_and_set atomic_flag_test_and_set_explicit']
 --
@@ -8874,7 +8874,7 @@ feature.
 
 
 [[atomic_flag_clear]]
-===== *The atomic_flag_clear Functions*
+===== The atomic_flag_clear Functions
 
 [open,refpage='atomic_flag_clear',desc='The atomic_flag_clear Functions',type='freeform',spec='clang',anchor='atomic_flag_clear',xrefs='atomicFunctions atomicTypes atomic_compare_exchange atomic_exchange atomic_fetch_key atomic_flag atomic_flag_clear atomic_flag_test_and_set atomic_flag_test_and_set_explicit atomic_init atomic_load atomic_store atomic_work_item_fence']
 --
@@ -9735,7 +9735,7 @@ The *F* conversion specifier produces `INF`, `INFINITY`, or `NAN` instead of
 
 **e,E** A `double`, `half__n__`, `float__n__` or `double__n__` argument
 representing a floating-point number is converted in the style
-__[__**-**__]d__**.**__ddd __**e{plusmn}}**_dd_, where there is one digit
+__[__**-**__]d__**.**__ddd __**e{plusmn}**_dd_, where there is one digit
 (which is nonzero if the argument is nonzero) before the decimal-point
 character and the number of digits after it is equal to the precision; if
 the precision is missing, it is taken as 6; if the precision is zero and the
@@ -10087,7 +10087,7 @@ queried using the `CL_DEVICE_MAX_SAMPLERS` token in *clGetDeviceInfo*.
 
 
 [[determining-the-border-color-or-value]]
-===== *Determining the Border Color or Value*
+===== Determining the Border Color or Value
 
 If `<addressing mode>` in sampler is `CLK_ADDRESS_CLAMP`, then out-of-range
 image coordinates return the border color.
@@ -10104,7 +10104,7 @@ of the following values:
 
 
 [[srgb-images]]
-===== *sRGB Images*
+===== sRGB Images
 
 The built-in image read functions will perform sRGB to linear RGB
 conversions if the image is an sRGB image.
@@ -14071,7 +14071,7 @@ ifdef::cl_khr_subgroup_ballot[]
 NOTE: The functionality described in this section <<unified-spec, requires>>
 support for the `<<cl_khr_subgroup_ballot>>` extension.
 
-The <<table-ballot-functions, followingtable>> describes OpenCL C
+The <<table-ballot-functions, following table>> describes OpenCL C
 programming language built-in functions to allow work items in a sub-group
 to collect and operate on ballots from work items in the sub-group.
 These functions need not be encountered by all work items in a sub-group
@@ -14266,7 +14266,7 @@ endif::cl_khr_subgroup_ballot[]
 
 ifdef::cl_khr_subgroup_clustered_reduce[]
 [[sub-group-clustered-reduction-functions]]
-==== Built-in Clustered Reduction Functions for Sub-Groups
+==== Built-in Sub-Group Clustered Reduction Functions
 
 NOTE: The functionality described in this section <<unified-spec, requires>>
 support for the `<<cl_khr_subgroup_clustered_reduce>>` extension.
@@ -14298,7 +14298,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-clustered-reduce-math-functions]]
-.Built-in Arithmetic Functions for Sub-Groups
+.Built-in Sub-Group Clustered Reduction Arithmetic Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14336,7 +14336,7 @@ the supported built-in scalar data types `char`, `uchar`, `short`, `ushort`,
 `int`, `uint`, `long`, or `ulong`.
 
 [[table-clustered-reduce-bitwise-functions]]
-.Built-in Bitwise Functions for Sub-Groups
+.Built-in Sub-Group Clustered Reduction Bitwise Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14366,7 +14366,7 @@ logically `true` and a zero _predicate_ argument or return value is
 logically `false`.
 
 [[table-clustered-reduce-logical-functions]]
-.Built-in Logical Functions for Sub-Groups
+.Built-in Sub-Group Clustered Reduction Logical Functions
 [cols="3a,2",options="header",]
 |====
 | Function | Description
@@ -14388,7 +14388,7 @@ endif::cl_khr_subgroup_clustered_reduce[]
 
 
 ifdef::cl_khr_subgroup_non_uniform_arithmetic[]
-==== Built-in Non-Uniform Scan and Reduction Functions for Sub-Groups
+==== Built-in Sub-Group Non-Uniform Scan and Reduction Functions
 
 NOTE: The functionality described in this section <<unified-spec, requires>>
 support for the `<<cl_khr_subgroup_non_uniform_arithmetic>>` extension.
@@ -14407,7 +14407,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-non-uniform-math-functions]]
-.Built-in Non-Uniform Arithmetic Functions for Sub-Groups
+.Built-in Sub-Group Non-Uniform Arithmetic Functions
 [cols="3a,2",options="header",]
 |====
 | Function | Description
@@ -14499,7 +14499,7 @@ supported built-in scalar data types `char`, `uchar`, `short`, `ushort`,
 `int`, `uint`, `long`, and `ulong`.
 
 [[table-non-uniform-bitwise-functions]]
-.Built-in Non-Uniform Bitwise Functions for Sub-Groups
+.Built-in Sub-Group Non-Uniform Bitwise Functions
 [cols="3a,2",options="header",]
 |====
 | Function | Description
@@ -14561,7 +14561,7 @@ logically `true` and a zero _predicate_ argument or return value is
 logically `false`.
 
 [[table-non-uniform-logical-functions]]
-.Built-in Non-Uniform Logical Functions for Sub-Groups
+.Built-in Sub-Group Non-Uniform Logical Functions
 [cols="2a,1",options="header",]
 |====
 | Function | Description
@@ -14614,7 +14614,7 @@ endif::cl_khr_subgroup_non_uniform_arithmetic[]
 
 
 ifdef::cl_khr_subgroup_non_uniform_vote[]
-==== Built-in Non-Uniform Vote Functions for Sub-Groups
+==== Built-in Sub-Group Non-Uniform Vote Functions
 
 NOTE: The functionality described in this section <<unified-spec, requires>>
 support for the `<<cl_khr_subgroup_non_uniform_vote>>` extension.
@@ -14632,7 +14632,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-non-uniform-vote-functions]]
-.Built-in Non-Uniform Vote Functions for Sub-Groups
+.Built-in Sub-Group Non-Uniform Vote Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14704,7 +14704,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-rotate-functions]]
-.Built-in Rotation Functions for Sub-Groups
+.Built-in Sub-Group Rotation Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14748,7 +14748,7 @@ endif::cl_khr_subgroup_rotate[]
 
 
 ifdef::cl_khr_subgroup_shuffle[]
-==== Built-in Shuffle Functions for Sub-Groups
+==== Built-in Sub-Group General Purpose Shuffle Functions
 
 NOTE: The functionality described in this section <<unified-spec, requires>>
 support for the `<<cl_khr_subgroup_shuffle>>` extension.
@@ -14765,7 +14765,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-shuffle-functions]]
-.Built-in Shuffle Functions for Sub-Groups
+.Built-in Sub-Group General Purpose Shuffle Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14804,7 +14804,7 @@ endif::cl_khr_subgroup_shuffle[]
 
 
 ifdef::cl_khr_subgroup_shuffle_relative[]
-==== Add a new Section 6.15.X - Sub-Group Relative Shuffle Built-in Functions
+==== Built-in Sub-Group Relative Shuffle Functions
 
 The table below describes specialized OpenCL C programming language built-in
 functions that allow work items in a sub-group to exchange data.
@@ -14817,7 +14817,7 @@ footnote:[{fn-half-supported}], and `double`
 footnote:[{fn-double-supported}].
 
 [[table-shuffle-relative-functions]]
-.Built-in Relative Shuffle Functions for Sub-Groups
+.Built-in Sub-Group Relative Shuffle Functions
 [cols="1a,1",options="header",]
 |====
 | Function | Description
@@ -14859,7 +14859,7 @@ endif::cl_khr_subgroup_shuffle_relative[]
 
 
 [[extended-sub-groups-mapping]]
-=== Sub-Groups Function Mapping and Capabilities
+==== Sub-Groups Function Mapping and Capabilities
 
 This section describes a possible mapping between OpenCL built-in sub-group functions
 and SPIR-V instructions and required SPIR-V capabilities.