Skip to content

Home Assistant custom component integration for Senertec energy units.

License

Notifications You must be signed in to change notification settings

Kleinrotti/hass-senertec

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

22 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Home Assistant integration for Senertec

hacs_badge

Custom component to support Senertec energy systems.

Table of Contents

About

With this integration you can integrate the sensors of your senertec heating system into Home Assistant.

Installation

Requires Home Assistant 2021.11.0 or newer. You need an account for Senertec Dachsconnect Gen2.

Installation through HACS

If you have not yet installed HACS, go get it at https://hacs.xyz/ and walk through the installation and configuration.

Then find the Senertec energy system integration in HACS and install it.

Restart Home Assistant!

Install the new integration through Configuration -> Integrations in HA (see below).

Manual installation

Copy the sub-path /hass-senertec/custom_components/senertec of this repo into the path /config/custom_components/senertec of your HA installation.

Alternatively use the following commands within an SSH shell into your HA system. Do NOT try to execute these commands directly your PC on a mounted HA file system. The resulting symlink would be broken for the HA file system.

cd /config
git clone https://github.com/Kleinrotti/hass-senertec.git

# if folder custom_components does not yet exist:
mkdir custom_components

cd custom_components
ln -s ../hass-senertec/custom_components/senertec

Configuration

Home Assistant

Setup under Integrations in Home Assistant, search for "Senertec energy system". You need to enter e-mail and password of your Senertec Dachsconnect account.

After setting up the integration, you can adjust some options on the integration panel for it.

Even though this integration can be installed and configured via the Home Assistant GUI (uses config flow), you might have to restart Home Assistant to get it working.

Supported devices

The following devices are currently supported:

  • Senertec Dachs 0.8
  • Senertec Dachs Gen2 F5.5
  • Remeha eLecta Ace 300

Development

Debugging

To enable debug logging for this integration and related libraries you can control this in your Home Assistant configuration.yaml file. Example:

logger:
  default: info
  logs:
    custom_components.senertec: debug

    py-senertec: debug
    websocket: debug