Git workflow

To clone code from the cloud to local pc (used only once) git clone {link}

1. Before changing code git pull origin
2. after adding/ changing code and testing it, go to the project tab (GITHUB and move item to DONE column) git add . git commit -am "{descriptive msg of changes}"
3. to push local changes to the cloud git push origin

and repeat from 1-3

Sig_Gen

Checklist

1. When the program starts the program asks the user for the following parameters:

1. Sampling frequency of signal.
2. Start and end of time scale
3. Number of the break points and their positions (i.e. the points that the signal definition rule changes). Example: The signal is defined from -2:0 as a DC signal and from 0:2 as ramp the user will enter that the number of break points =1 and the position at t=0.

2. According to the number of break points the program asks the user at each region to enter the specifications of the signal at this region Which are:

1. DC signal: Amplitude.
2. Ramp signal: slope –intercept.
3. General order polynomial: Amplitude-power –intercept.
4. Exponential signal: Amplitude –exponent.
5. Sinusoidal signal: Amplitude –frequency –phase.

3. Display the resulting signal in time domain.

4. the program asks the user if he wants to perform any operation on the signal

1. Amplitude Scaling:scale value.
2. Time reversal.
3. Time shift: shift value.
4. Expanding the signal: expanding value
5. Compressing the signal: compressing value
6. None

5. Display the new signal in time domain