HML_FwLib_STC11 is a member component of HML firmware library, providing a group of interface functions for users to operate on-chip resource of STC11 MCUs, including GPIO, IAP, timer, UART, external interrupt, power management and watchdog. The STC11 MCU is a kind of Intel MCS-51 based MCU which released by STC Micro(宏晶). Compared to STC10 series, STC11 provides dedicated wake-up timer for power down mode.
We intend to provide a lite and easy-use firmware library that can help future developers to complete projects based on STC11 MCUs more easily and quickly. All source codes are written in C language and for SDCC compiler, i.e., it can only be compiled by SDCC. This choice is motivated by the fact that SDCC is free and highly efficient, while there are very few examples of application about SDCC on the Internet. We hope that, as one of the early attempts to develop MCU projects using SDCC, this work will make SDCC become more popular among MCU developers.
Please visit detail page for more information to get started it!
- 🎯Based on SDCC compiler.
- Cover all on-chip resource of STC11 series MCUs.
- Open all source code on Github and licensed under the WTPL2.
- Readable code and provide examples to help you get started it.
Here is a list of the all on-chip peripheral drivers and examples that need to be ported.
| Peripheral | Description | Status |
|---|---|---|
| extended bus | Intel 8080 bus receiver/transmitter | supported |
| EXTI | extern interrupt | supported |
| GPIO | I/O peripheral | supported |
| IAP | in application programming | supported |
| PWR | power management | supported |
| RCC | reset & clock control | supported |
| TIM | timer | supported |
| UART | universal asynchronous receiver/transmitter | supported |
| WDT | watchdog | supported |
There are several parameters need to be configured by user manually.
In order to ensure the projects based on HML_FwLib_STC11 can be downloaded into the limited on-chip flash space of STC11 MCUs, the developers can modify the macro definition named __CONF_COMPILE_xxx in conf.h to specify which piece of codewill take part in compilation, then it will reduce size of final .hex file. If user only use GPIO module, then user just need to enable __CONF_COMPILE_GPIO macro in conf.h. Some macros for conditional compilation rely on others. For example, before you define the macro definition __CONF_COMPILE_RCC, the macro __CONF_COMPILE_UTIL should be defined, otherwise the compilation would be failed.
The macro mark frequency of clock source, including extern crystal oscillator or internal RC oscillating circuit, and it's defined in conf.h.
Enable function pow() which provided by HML. SDCC builtin library doesn't have this function.
The macro mark the model of target MCU and is defined in hml/conf.h.
We provide two kinds of build system support:
- cmake
- gmake
Run this command for initialization. Add option -GNinja if you expect to build project via Ninja.
$ cmake -S . -B build
Run this command for building project. Add option --clean-first if you want to execute clean operation before building.
$ cmake --build build -j$(nproc)
You can execute command cmake --build build -t usage for usage. If you want to adjust build details, please modify cmake/config.cmake.
Execute this command for building HML_FwLib_STC11 with GNU Make.
$ make -j$(nproc)
You can execute command make help for usage. If you want to adjust build details, please modify mk/config.mk.
Welcome suggestions and contribution from you! You can fork it or contact us via mcu@zhishan-iot.tk.
HML_FwLib_STC11 is licensed under the WTFPL2.
| member | role | |
|---|---|---|
| Amy Chung | Testing | zhongliguo@zhishan-iot.tk |
| Weilun Fong | Director | wlf@zhishan-iot.tk |