`v2.11.0`

Changes

As of mikroSDK version 2.11.0, XC32 v4.35 is officially supported.
All 187 PIC32 MCUs can now be used with the XC32 toolchain along with full mikroSDK functionality.
Linker scripts are included upon selecting adequate setup for your project so it can be easily edited on the fly.
All standard modules supported (GPIO, ADC, I2C, PWM, SPI, UART, OneWire, RTC, CAN, DMA and LCD)
Third party modules supported
- TinyUSB (An open source cross-platform USB stack for embedded system)
- LVGL (Light and Versatile Embedded Graphics Library)
- FatFs (Generic FAT Filesystem Module)

As of mikroSDK version 2.11.0, XC16 v2.10 is officially supported.
All 531 dsPIC/PIC24 MCUs can now be used with the XC16 toolchain along with full mikroSDK functionality.
Linker scripts are included upon selecting adequate setup for your project so it can be easily edited on the fly.
All standard modules supported (GPIO, ADC, I2C, PWM, SPI, UART, OneWire, CAN and LCD)
Third party modules supported
- FatFs (Generic FAT Filesystem Module)

As of mikroSDK version 2.11.0, XC8 v2.46 is officially supported.
Due to the complexity of mikroSDK, only PIC18xxQ43 family of MCUs is supported.
All standard modules supported (GPIO, ADC, I2C, PWM, SPI, UART, OneWire, CAN, DMA and LCD)
Third party modules supported
- FatFs (Generic FAT Filesystem Module)

Fixed drv/lib/CMakeLists.txt to include the appropriate subdirectories.
- Previously, lib_drv_i2c_master and lib_drv_port were switched. Now, the inclusion is based on their individual definitions – ensuring that each is included as intended.
Fixed all low level implementations for PIC32 MCUs to accommodate the release of XC32 toolchain.
Fixed issue with gl_text not drawing correct characters on XC compilers.
Fixed issue with tp not detecting TP_EVENT_PRESS_UP on tft7 boards.
Fixed wrong LCD_TFT_8BIT_CH0 port name for:
Fixed wrong HAL_LL_I2C_MAX_SPEED_VALUE for I2CxBRG register for dsPIC devices.
Fixed custom board inclusion into project
- Custom board is not generated in mikroSDK BSP anymore, but in MIKROE app data

Added doxy style help generation files for mikroSDK
- Additionally, a layout file has been added as well
Changed directory so it can be built as bare metal
- Changed following files:
  - ./CMakeLists.txt
  - ./platform/CMakeLists.txt
  - ./platform/conversions/lib/CMakeLists.txt
    - Changed name to Generic.Conversions
delays.h explicitly included in all files which use any delay API
Changed order of variables in ili9341.c for MikroC AI for dsPIC due to issue with W2 register.
Changed ./hal_ll_adc.c, added setting of pin analog functionality in hal_ll_adc_read function because of special case in tp_mikroe.c where we constantly change pin configuration.
Changed ./tsc2003.h, I2C slave address for touch controller is now defined in database.
Updated all tests to build with XC compilers
- Additinally, added preinit routine to every test as well