Envoy EDS "hello world"

A simple app demonstrating a small part of Envoy's Endpoint Discovery Service. THis is a sample walkthough of a trivial envoy config that sets up:

Envoy with SDS bootstrap (both envoy v1 and v2 APIs)
SDS Server to provide service discovery info for upstream back to Envoy
N upstream instances envoy will proxy back.

Some of the configurations are hardcoded in the envoy_config.yaml file just as a demonstration. Specifically, the service, cluster and bootstrap endpoint to get discovery information.

References

Prerequsites

envoy binary
python (and virtualenv)

Start Envoy with SDS

Bootstraping SDS within Envoy is relatively simple:

  - name: listener_0
    address:
      socket_address: { address: 0.0.0.0, port_value: 10000 }
    filter_chains:
    - filters:
      - name: envoy.http_connection_manager
        config:
          stat_prefix: ingress_http
        ...
        ...
              - match: { prefix: "/" }
                route: { cluster: service_backend }
          http_filters:
          - name: envoy.router
  clusters:
  - name: service_backend
    type: EDS  
    connect_timeout: 0.25s
    eds_cluster_config:
      service_name: myservice
      eds_config:
        api_config_source:
          #api_type: REST_LEGACY # GET /v1/registration/myservice
          #api_type: REST # POST /v2/discovery:endpoints
          api_type: REST
          cluster_names: [eds_cluster]
          refresh_delay: 5s
  - name: eds_cluster
    type: STATIC
    connect_timeout: 0.25s
    hosts: [{ socket_address: { address: 127.0.0.1, port_value: 8080 }}]

Note the api_type: is set to v2 REST endpoint. If you want to swtich to v1 simply use api_type: REST_LEGACY

So start envoy with debug enabled:

envoy -c envoy_config.yaml --v2-config-only -l debug

At this point, envoy attempts to connect to the upstream EDS cluster at 127.0.0.1:8080 but since your SDS isn't running yet, nothing additional config takes place.

Start Upstream services

Now in a new window, start the upstream service on a given the default port for the script (:8081)

cd upstream/

virtualenv env --python=python2.7
source env/bin/activate
pip install -r requirements.txt

$ python server.py -p 8081

Right now envoy doens't know aboutt his endpoint:

Start SDS

Now start SDS without any bootstrapped config:

cd eds_server/

virtualenv env --python=python2.7
source env/bin/activate
pip install -r requirements.txt

# ImportError: No module named enum
# pip install enum34

python main.py

You should see the following output on SDS stdout indicating an inbound Envoy discovery request:

Inbound v2 request for discovery.  POST payload: {u'node': {u'build_version': u'fd44fd6051f5d1de3b020d0e03685c24075ba388/1.6.0-dev/Clean/RELEASE', u'cluster': u'mycluster', u'id': u'test-id'}, u'resource_names': [u'myservice']}
127.0.0.1 - - [29/Apr/2018 22:59:04] "POST /v2/discovery:endpoints HTTP/1.1" 200 -

then on the envoy proxy stdout, something like:

[2018-04-29 22:59:10.323][157796][debug][config] bazel-out/k8-opt/bin/source/common/config/_virtual_includes/http_subscription_lib/common/config/http_subscription_impl.h:67] Sending REST request for /v2/discovery:endpoints
[2018-04-29 22:59:10.323][157796][debug][router] source/common/router/router.cc:250] [C0][S636378528925215024] cluster 'eds_cluster' match for URL '/v2/discovery:endpoints'
[2018-04-29 22:59:10.323][157796][debug][router] source/common/router/router.cc:298] [C0][S636378528925215024]   ':method':'POST'
[2018-04-29 22:59:10.323][157796][debug][router] source/common/router/router.cc:298] [C0][S636378528925215024]   ':path':'/v2/discovery:endpoints'
[2018-04-29 22:59:10.323][157796][debug][router] source/common/router/router.cc:298] [C0][S636378528925215024]   ':authority':'eds_cluster'
...
[2018-04-29 22:59:10.324][157796][debug][client] source/common/http/codec_client.cc:52] [C2] connected
[2018-04-29 22:59:10.324][157796][debug][pool] source/common/http/http1/conn_pool.cc:225] [C2] attaching to next request
...
[2018-04-29 22:59:10.330][157796][debug][client] source/common/http/codec_client.cc:81] [C2] response complete
[2018-04-29 22:59:10.330][157796][debug][pool] source/common/http/http1/conn_pool.cc:200] [C2] response complete
...
[2018-04-29 22:59:10.331][157796][debug][pool] source/common/http/http1/conn_pool.cc:115] [C2] client disconnected

Basically, this shows no updates were recieved from the endpoint

You can verify that envoy doesn't know anything about this endpoint by attempting to connect through to it:

curl -v https://localhost:10000/
$ curl -v  http://localhost:10000/
... 
< HTTP/1.1 503 Service Unavailable
< content-length: 19
< content-type: text/plain
< date: Mon, 30 Apr 2018 06:06:20 GMT
< server: envoy
< 
* Connection #0 to host localhost left intact
no healthy upstreams

Add endpoint to SDS

Now we're ready to add an upstream service configuration to the SDS server. This sample uses Flask-RESTplus framework which delivers a convenient API console (you can, ofcourse, use curl)

connect to SDS servers UI console at:

http://localhost:8080/

From there, you can register a service endpoint by selecting POST and the default payload.

Create Endpoint

Since we defined the service as myservice in the envoy_config.yaml, we can need to register an endpoint against it:

curl -X POST --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{
  "hosts": [
    {
      "ip_address": "127.0.0.1",
      "port": 18080,
      "tags": {
        "az": "us-central1-a",
        "canary": false,
        "load_balancing_weight": 50
      }
    }
  ]
}' http://localhost:8080/edsservice/myservice

What this will do is set some endpoints for myservice. Now, envoy will query SDS for membership so on the next poll, you'll see some lines like:

[2018-04-29 23:18:02.360][159226][debug][upstream] source/common/upstream/eds.cc:105] EDS hosts changed for cluster: service_backend (0) priority 0
[2018-04-29 23:18:02.360][159231][debug][upstream] source/common/upstream/cluster_manager_impl.cc:642] membership update for TLS cluster service_backend
[2018-04-29 23:18:02.360][159226][debug][upstream] source/common/upstream/cluster_manager_impl.cc:642] membership update for TLS cluster service_backend
[2018-04-29 23:18:02.360][159233][debug][upstream] source/common/upstream/cluster_manager_impl.cc:642] membership update for TLS cluster service_backend
[2018-04-29 23:18:02.360][159234][debug][upstream] source/common/upstream/cluster_manager_impl.cc:642] membership update for TLS cluster service_backend
[2018-04-29 23:18:02.360][159232][debug][upstream] source/common/upstream/cluster_manager_impl.cc:642] membership update for TLS cluster service_backend
[2018-04-29 23:18:02.360][159226][debug][pool] source/common/http/http1/conn_pool.cc:200] [C7] response complete
[2018-04-29 23:18:02.360][159226][debug][pool] source/common/http/http1/conn_pool.cc:220] [C7] moving to ready

Check client connectivity via envoy

Since we already started the upstream service above, you can connect to it via envoy:

$ curl -v  http://localhost:10000/
 
< HTTP/1.1 200 OK
< content-type: text/html; charset=utf-8
< content-length: 36
< server: envoy
< date: Mon, 30 Apr 2018 06:21:43 GMT
< x-envoy-upstream-service-time: 3
< 
* Connection #0 to host localhost left intact
40b9bc6f-77b8-49b7-b939-1871507b0fcc

(note the server: envoy part in the header)

Delete Endpoint

Ok, so now we've dynamically added in an endpoint...lets remove it by the SDS server's custom API and emptying out its hosts: []

curl -X PUT --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{
  "hosts": [  ]
}' http://localhost:8080/edsservice/myservice

Now try the endpoint, you should see no healthy upstream message from envoy

$ curl -v  http://localhost:10000/
< HTTP/1.1 503 Service Unavailable
< content-length: 19
< content-type: text/plain
< date: Mon, 30 Apr 2018 06:23:40 GMT
< server: envoy
< 
* Connection #0 to host localhost left intact
no healthy upstream

Rinse and repeat

Ok, you can continue to play with the endpoints by adding and removing new upstream services on differnet ports:

eg:

$ python server.py -p 8082
$ python server.py -p 8083

and then using the API to add hosts to the SDS server (use the PUT endpoint to do that)

Healthcheck

A note about healthchecks: I noticed that once i added in healthchecks to the endpoint, even if i deleted the upstream service from the SDS server (i.,e removed it from hosts: list), the healthchecks continued and we can still connect to it via envoy. Since i'm new to envoy config, i suspect this is working as intended..

    health_checks: 
      - timeout: 1s
        interval: 5s
        unhealthy_threshold: 1
        healthy_threshold: 1
        http_health_check: 
          path: /healthz

Concolusion

I wrote this up just in an effort to play around with envoy i'm pretty much new to this so i likely have numerous misunderstanding on what i just did here...if you see something amiss, please do let me know.

Name		Name	Last commit message	Last commit date
Latest commit History 4 Commits
eds_server		eds_server
images		images
upstream		upstream
LICENSE		LICENSE
README.md		README.md
envoy_config.yaml		envoy_config.yaml

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Envoy EDS "hello world"

References

Prerequsites

Start Envoy with SDS

Start Upstream services

Start SDS

Add endpoint to SDS

Create Endpoint

Check client connectivity via envoy

Delete Endpoint

Rinse and repeat

Healthcheck

Concolusion

About

Releases

Packages

Languages

License

NetWilliam/envoy_discovery

Folders and files

Latest commit

History

Repository files navigation

Envoy EDS "hello world"

References

Prerequsites

Start Envoy with SDS

Start Upstream services

Start SDS

Add endpoint to SDS

Create Endpoint

Check client connectivity via envoy

Delete Endpoint

Rinse and repeat

Healthcheck

Concolusion

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages