tests: update tests

Signed-off-by: Kamil Gierszewski <kamil.gierszewski@huawei.com>

test/functional/tests/fault_injection/test_error_device_as_cache.py

@@ -0,0 +1,379 @@
+#
+# Copyright(c) 2024 Huawei Technologies Co., Ltd.
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+import pytest
+
+from time import sleep
+
+from test_tools.fio.fio import Fio
+from test_tools.fio.fio_param import ReadWrite, IoEngine, ErrorFilter
+from test_tools.device_mapper import ErrorDevice, DmTable
+from core.test_run import TestRun
+from api.cas import casadm
+from api.cas.cache_config import (
+    CacheMode,
+    CacheLineSize,
+    SeqCutOffPolicy,
+    CleaningPolicy,
+    CacheModeTrait,
+)
+from storage_devices.disk import DiskTypeSet, DiskType
+from test_utils.io_stats import IoStats
+from test_utils.size import Size, Unit
+
+
+@pytest.mark.parametrizex("cache_line_size", CacheLineSize)
+@pytest.mark.require_disk("cache", DiskTypeSet([DiskType.optane, DiskType.nand]))
+@pytest.mark.require_disk("core", DiskTypeSet([DiskType.sata, DiskType.hdd4k, DiskType.hdd]))
+def test_error_device_as_cache_clean_wt(cache_line_size):
+    """
+    title: Validate Open CAS ability to handle read hit I/O error on cache device for clean data
+    description: |
+        Perform I/O on exported object in Write-Through mode while error device is cache device and
+        validate if errors are present in Open CAS stats.
+    pass_criteria:
+      - Write error count in io is zero
+      - Read error count in io is zero
+      - Write error count in cache statistics is zero
+      - Total error count in cache statistics is greater than zero
+    """
+
+    with TestRun.step("Prepare cache and core devices"):
+        cache_device = TestRun.disks["cache"]
+        core_device = TestRun.disks["core"]
+
+        cache_device.create_partitions([Size(500, Unit.MebiByte)])
+        core_device.create_partitions([Size(400, Unit.MebiByte)])
+
+        cache_part = cache_device.partitions[0]
+        error_device = ErrorDevice("error", cache_part)
+
+    with TestRun.step("Start cache in Write-Through mode"):
+        cache = casadm.start_cache(
+            error_device, cache_mode=CacheMode.WT, cache_line_size=cache_line_size, force=True
+        )
+
+    with TestRun.step("Disable cleaning policy and sequential cutoff"):
+        cache.set_seq_cutoff_policy(SeqCutOffPolicy.never)
+        cache.set_cleaning_policy(CleaningPolicy.nop)
+
+    with TestRun.step(f"Add core"):
+        core = cache.add_core(core_dev=core_device.partitions[0])
+
+    with TestRun.step("Run fio against core to fill it with pattern"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(core)
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randwrite)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .verification_with_pattern("0xabcd")
+            .do_verify(False)
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported no write errors"):
+        if fio_errors != 0:
+            TestRun.fail("Fio reported write errors!")
+
+    with TestRun.step("Stop cache"):
+        metadata_size = cache.get_metadata_size_on_disk() + Size(1, Unit.MiB)
+        cache.stop()
+
+    with TestRun.step("Enable errors on cache device (after metadata area)"):
+        error_device.change_table(
+            error_table(start_lba=metadata_size, stop_lba=cache_part.size).fill_gaps(cache_part)
+        )
+
+    with TestRun.step("Load cache and reset counters"):
+        cache = casadm.load_cache(error_device)
+        cache.reset_counters()
+
+    with TestRun.step("Run io against core with pattern verification"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(core)
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randread)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .verification_with_pattern("0xabcd")
+            .do_verify(False)
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported no read errors"):
+        if fio_errors != 0:
+            TestRun.fail("Fio reported read errors!")
+
+    with TestRun.step("Check cache error statistics"):
+        stats = cache.get_statistics()
+        write_errors_in_cache = stats.error_stats.cache.writes
+        if write_errors_in_cache != 0:
+            TestRun.fail(f"Write errors in cache stats detected ({write_errors_in_cache})!")
+
+        total_errors_in_cache = stats.error_stats.cache.total
+        if total_errors_in_cache == 0:
+            TestRun.fail(
+                f"Total errors in cache stats ({total_errors_in_cache}) should be greater than 0!"
+            )
+
+        TestRun.LOGGER.info(f"Total number of I/O errors in cache stats: {total_errors_in_cache}")
+
+
+@pytest.mark.parametrizex("cache_line_size", CacheLineSize)
+@pytest.mark.require_disk("cache", DiskTypeSet([DiskType.optane, DiskType.nand]))
+@pytest.mark.require_disk("core", DiskTypeSet([DiskType.sata, DiskType.hdd4k, DiskType.hdd]))
+def test_error_device_as_cache_clean_wa(cache_line_size):
+    """
+    title: Validate Open CAS ability to handle read hit I/O error on cache device for clean data
+    description: |
+        Perform I/O on exported object in Write-Around mode while error device is cache device and
+        validate if errors are present in Open CAS stats.
+    pass_criteria:
+      - Write error count in io is zero
+      - Read error count in io is zero
+      - Read error count in cache statistics is zero
+      - Total error count in cache statistics is greater than zero
+    """
+
+    with TestRun.step("Prepare cache and core devices"):
+        cache_device = TestRun.disks["cache"]
+        core_device = TestRun.disks["core"]
+
+        cache_device.create_partitions([Size(500, Unit.MebiByte)])
+        core_device.create_partitions([Size(400, Unit.MebiByte)])
+
+        cache_part = cache_device.partitions[0]
+        error_device = ErrorDevice("error", cache_part)
+
+    with TestRun.step("Start cache in Write-Around"):
+        cache = casadm.start_cache(
+            error_device, cache_mode=CacheMode.WA, cache_line_size=cache_line_size, force=True
+        )
+
+    with TestRun.step("Disable cleaning policy and sequential cutoff"):
+        cache.set_seq_cutoff_policy(SeqCutOffPolicy.never)
+        cache.set_cleaning_policy(CleaningPolicy.nop)
+
+    with TestRun.step(f"Add core"):
+        core = cache.add_core(core_dev=core_device.partitions[0])
+
+    with TestRun.step("Run fio against core to fill it with pattern"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(core)
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randread)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported no errors"):
+        if fio_errors != 0:
+            TestRun.fail("Fio reported write errors!")
+
+    with TestRun.step("Stop cache"):
+        metadata_size = cache.get_metadata_size_on_disk() + Size(1, Unit.MiB)
+        cache.stop()
+
+    with TestRun.step("Enable errors on cache device (after metadata area)"):
+        error_device.change_table(
+            error_table(start_lba=metadata_size, stop_lba=cache_part.size).fill_gaps(cache_part)
+        )
+
+    with TestRun.step("Load cache and reset counters"):
+        cache = casadm.load_cache(error_device)
+        cache.reset_counters()
+
+    with TestRun.step("Run io against core with pattern verification"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(core)
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randwrite)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .verification_with_pattern("0xabcd")
+            .do_verify(False)
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported no errors"):
+        if fio_errors != 0:
+            TestRun.fail("Fio reported write errors!")
+
+    with TestRun.step("Check cache error statistics"):
+        stats = cache.get_statistics()
+        read_errors_in_cache = stats.error_stats.cache.reads
+        if read_errors_in_cache != 0:
+            TestRun.fail(f"Reads errors in cache stats detected ({read_errors_in_cache})!")
+
+        total_errors_in_cache = stats.error_stats.cache.total
+        if total_errors_in_cache == 0:
+            TestRun.fail(
+                f"Total errors in cache stats ({total_errors_in_cache}) should be greater than 0!"
+            )
+
+        TestRun.LOGGER.info(f"Total number of I/O errors in cache stats: {total_errors_in_cache}")
+
+
+@pytest.mark.parametrizex("cache_line_size", CacheLineSize)
+@pytest.mark.parametrizex("cache_mode", CacheMode.with_traits(CacheModeTrait.LazyWrites))
+@pytest.mark.require_disk("cache", DiskTypeSet([DiskType.optane, DiskType.nand]))
+@pytest.mark.require_disk("core", DiskTypeSet([DiskType.sata, DiskType.hdd4k, DiskType.hdd]))
+def test_error_device_as_cache_dirty(cache_mode, cache_line_size):
+    """
+    title: Validate Open CAS ability to handle read hit I/O error on cache device for dirty data
+    description: |
+        Perform I/O on exported object while error device is used as cache device and validate if
+        errors are present in Open CAS statistics and no I/O traffic is detected on cores after
+        enabling errors on cache device.
+    pass_criteria:
+      - Write error count in fio is zero
+      - Read error count in fio is greater than zero
+      - I/O error count in cache statistics is greater than zero
+      - I/O traffic stop on the second core after enabling errors on cache device is stopped
+    """
+
+    with TestRun.step("Prepare cache and core devices"):
+        cache_device = TestRun.disks["cache"]
+        core_device = TestRun.disks["core"]
+
+        cache_device.create_partitions([Size(1, Unit.GibiByte)])
+        core_device.create_partitions([Size(400, Unit.MebiByte)] * 2)
+
+        cache_part = cache_device.partitions[0]
+        core_parts = core_device.partitions
+        error_device = ErrorDevice("error", cache_part)
+
+    with TestRun.step("Start cache"):
+        cache = casadm.start_cache(
+            error_device, cache_mode=cache_mode, cache_line_size=cache_line_size, force=True
+        )
+
+    with TestRun.step("Disable cleaning policy and sequential cutoff"):
+        cache.set_seq_cutoff_policy(SeqCutOffPolicy.never)
+        cache.set_cleaning_policy(CleaningPolicy.nop)
+
+    with TestRun.step(f"Add core"):
+        cores = [cache.add_core(core_dev=core) for core in core_parts]
+
+    with TestRun.step("Run io against the first core to fill it with pattern"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(cores[0])
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randwrite)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .verification_with_pattern("0xabcd")
+            .do_verify(False)
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported no write errors"):
+        if fio_errors != 0:
+            TestRun.fail("Fio reported write errors!")
+
+    with TestRun.step("Stop cache"):
+        cache.stop(no_data_flush=True)
+
+    with TestRun.step("Enable errors on cache device (after metadata area)"):
+        metadata_size = cache.get_metadata_size_on_disk() + Size(1, Unit.MiB)
+        error_device.change_table(
+            error_table(start_lba=metadata_size, stop_lba=cache_part.size).fill_gaps(cache_part)
+        )
+
+    with TestRun.step("Load cache and reset counters"):
+        cache = casadm.load_cache(error_device)
+        cache.reset_counters()
+
+    with TestRun.step("Run fio against the first core with pattern verification"):
+        fio = (
+            Fio()
+            .create_command()
+            .target(cores[0])
+            .io_engine(IoEngine.libaio)
+            .io_depth(1)
+            .num_jobs(1)
+            .size(cache_part.size)
+            .read_write(ReadWrite.randread)
+            .block_size(cache_line_size)
+            .rand_seed(int(cache_part.size.get_value()))
+            .direct()
+            .verification_with_pattern("0xabcd")
+            .do_verify(False)
+            .continue_on_error(ErrorFilter.io)
+        )
+        fio_errors = fio.run()[0].total_errors()
+
+    with TestRun.step("Check if fio reported read errors"):
+        if fio_errors == 0:
+            TestRun.fail("Fio does not reported read errors!")
+        TestRun.LOGGER.info(f"Number of fio read errors: {fio_errors}")
+
+    with TestRun.step("Check the second core I/O traffic"):
+        core_2_errors_before = IoStats.get_io_stats(cores[1].get_device_id())
+        sleep(5)
+        core_2_errors_after = IoStats.get_io_stats(cores[1].get_device_id())
+
+        if (
+            core_2_errors_after.reads > core_2_errors_before.reads
+            or core_2_errors_after.writes > core_2_errors_before.writes
+        ):
+            TestRun.fail(f"I/O traffic detected on the second core ({cores[1]})!")
+        else:
+            TestRun.LOGGER.info(f"I/O traffic stopped on the second core ({cores[1]})")
+
+    with TestRun.step("Check total cache error statistics"):
+        stats = cache.get_statistics()
+        total_errors_in_cache = stats.error_stats.cache.total
+        if total_errors_in_cache == 0:
+            TestRun.fail(
+                f"Total errors in cache stats ({total_errors_in_cache}) should be greater than 0!"
+            )
+        TestRun.LOGGER.info(f"Total number of I/O errors in cache stats: {total_errors_in_cache}")
+
+
+def error_table(start_lba: Size, stop_lba: Size):
+    return DmTable.uniform_error_table(
+        start_lba=int(start_lba.get_value(Unit.Blocks512)),
+        stop_lba=int(stop_lba.get_value(Unit.Blocks512)),
+        num_error_zones=100,
+        error_zone_size=Size(5, Unit.Blocks512),
+    )