Skip to content

Rainer559/kasm

Repository files navigation



Kasm Workspaces Registry

This repository is a template you can use to create your own registry that will work with Kasm Workspaces. A front end website is automatically generated for you and will look similar to the one below.

image

Contents

  1. Create your own repository
  2. Check workflows are running
  3. Edit the config variables
  4. Set up GitHub pages
  5. Creating Workspaces
  6. Discovery

 

1. Create your own repository

Use this template

  1. Click on the green Use this template button.
  2. Select Create a new repository from the dropdown.

Configure repository

use-template

Note If you set the Repository name to kasm-registry you wont have to make any changes to the baseUrl later, unless you want to use a (sub)domain.

  1. Select a Repository name, this name will also be used later for the baseUrl,
  2. Make sure it's set as a Public repository
  3. Tick the Include all branches checkbox,
  4. Click on the Create repository from template button.

 

2. Check workflows are running

Note If you see something in the table that looks similar to the above then it's working. If it needs enabling this section will probably be blank with a message about workflows needing to be enabled.

Click on the Actions tab in the top menu and check whether workflows need enabling, if they do, enable them, otherwise you should be good to go.

 

3. Edit the config variables

Modify next.config.js

edit-conf

  1. Go back to the Code tab
  2. Click the site folder
  3. Click on the next.config.js file
  4. Click the edit button.
  5. Fill in the env section with the relevant information and change the basePath if needed (details below).

Settings definitions

Property Description
env.name The name you want to display for your registry.
env.description A short description to display when a store's information button is pressed.
env.icon The image to display for your registry. You can upload an image to /site/public/ and reference that by https://domain.com/1.0/image.png or if you aren't using a {sub}domain by referencing it from https://username.github.io/repositoryname/1.0/image.png where image.png is the name of the image you uploaded. Alternatively just put the url of an image available on the web. If you just want to get the registry up and working, leave the default value in place until later.
env.listUrl The link to the root of your site. For example https://username.github.io/repositoryname/ it should always include a trailing slash.
env.contactUrl A link users can use to contact you on, such as your github issues page (right click the Issues tab in the top menu - next to the Code tab - and select copy link address and paste that in).
basePath If you are using a domain or a subdomain, your basePath will just be basePath: '/1.0',, otherwise change the value to include what you chose for the repository name in step 2 basePath: '/repositoryname/1.0',. The 1.0 will be replaced with the branch name automatically, so you should always keep it as 1.0.

Commit changes

image

  1. Scroll down to the bottom of the page
  2. Enter a commit message (You can also leave this blank)
  3. Click the Commit changes button.

 

4. Set up GitHub pages

Initial setup

gh-pages

Note If you ticked the "Include all branches" checkbox in step 1, this should all be set up for you, if not, just follow the instructions below

  1. Go to the Settings top menu tab
  2. Click the Pages left menu item
  3. In the Build and deployment section, under the Branch heading, make sure the dropdown is set to gh-pages, if not, set it and click Save.

Visit the site

If you see a message like the following:

image

Then congratulations, you should have a working site! Just click the Visit Site button. However, you changes may not have finished building yet, so before clicking the button it's advised to check the build process first.

Check build progress

If you don't see that button yet, then not to worry, it's likely that you are just too quick (also if you do see the button but it doesn't reflect the changes you made, this next bit is relevant as well)

Check on the CI progress in the Actions tab,

image

Once Page build and deployment is finished go back to Settings / Pages and you should have a live site. Click on the Visit Site button.

You should now have a working site which includes any workspaces you added or the default if you haven't made any changes yet

image

Checking it works

install-registry-800

Note If you copy the url from the address bar instead of clicking the button, be sure to remove the branch version from the URL when adding to workspaces, otherwise it wont work.

  1. Click on the Workspace Registry Link button, this will put the correct url in your clipboard.
  2. Go to your Kasm Workspaces instance.
  3. Navigate to the Workspaces Registry (Admin / Workspaces / Click on the Workspaces Registry button).
  4. Click on Add new in the registries list.
  5. Paste the URL into the text box and click Add Registry
  6. Click on the mini icon under the registry name to filter by your registries workspaces

 

5. Creating workspaces

Once you are ready to upload your workspaces, head back to the Code tab. You can either continue using the online editor or you might find it easier to clone the repository and work on a local copy, it's up to you. For this example we will continue with the online editor.

Folder structure

workspaces-800

All workspaces reside in the workspaces folder

You will need to create a folder and the necessary files using the following format:

Workspace Name
- workspace.json
- workspace-name.png

add-workspace-800

Folder name - The folder name can be whatever it needs to be. You probably want to stay clear of special characters to be on the safe side, but spaces should be fine.

workspace.json - This is a JSON file with all the parameters you want to be sent to Kasm Workspaces when it builds the container. You can see the valid paramaters in the schema section and whether they are required or not.

{
  "description": "Visual Studio Code is a code editor redefined and optimized for building and debugging modern web and cloud applications.",
  "docker_registry": "https://index.docker.io/v1/",
  "name": "kasmweb/vs-code:develop",
  "image_src": "vs-code.png",
  "categories": [
    "Development"
  ],
  "friendly_name": "Visual Studio Code",
  "architecture": [
    "amd64",
    "arm64"
  ],
  "compatibility": [
    "1.13.x"
  ],
  "uncompressed_size_mb": 2170
}

Image file - The image can be .png or .svg and ideally will be square and at least 50 x 50px. If you use the workspace builder on your registry store front it will try to normalise everything to make it simpler.

Don't forget to commit your changes!

Schema

Version 1.0

Property Required Type Description
friendly_name True String The name to show
name True String The docker image to use
description True String A short description of the workspace
image_src True String The name of the workspace icon used
architecture True Array Json list containing either "amd64", "arm64" or both
compatability True Array A list of Kasm versions the workspace should work with
uncompressed_size_mb True Integer Integer of the approximate size of the workspace when it's uncompressed in MB. This doesn't take into account layers. For example if an image is 2.46GB you would enter 2460
categories False Array Json list containing the categories the workspace belongs too. This should be limited to a max of 3.
docker_registry False String Which docker registry to use
run_config False Object Any additional parameters to add to the run config
exec_config False Object Any additional parameters to add to the exec config
notes False String Notes about running the workspace, such as if it requires libseccomp.
cores False Integer Specify the amount of cores to use for this workspace
memory False Integer Specify the amount of memory to use for this workspace
gpu_count False Integer Specify the amount of GPUs to use for this workspace
cpu_allocation_method False String What CPU allocation method to use for this workspace. Can be either "Inherit", "Quotas" or "Shares"

Head to the Actions tab to check your progress and once Page build and deployment is complete, your site should be ready.

New schema version

When a new schema version comes out, you just need to create a new branch that refrlects the new schema, for example 1.1 and make it the default branch.

In the new branch, make any updates that are needed, when the changes are committed a new version will be built.

Kasm Workspaces will automatically pull the version of the schema that it understands.

 

6. Discovery

The tag below will hopefully make it easier for people to find your Workspace Registry by clicking on this github search link. If you want to make it harder to find your repository for some reason, just remove this section.

If you are the one doing the searching, click on the site folder, then click on next.config.js and the url can be found under env.listUrl

search-600

KASM-REGISTRY-DISCOVERY-IDENTIFIER

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published