Seven Segment Nixie Tube

This repository contains the code and design files for a LED filament seven segment display, designed to resemble a nixie tube. The display can be configured in either common anode or WS2811 mode, providing a modern twist on the classic nixie tube aesthetic. It provides a warm glow to resemble a nixie tube while taking advantage of LED technology. Explore the provided files to build your own LED filament seven segment display and infuse your projects with a touch of vintage charm.

How to use it

To configure the LED filament seven segment display to common anode mode, solder the first and second pads of every solder bridge together.

To configure the LED filament seven segment display to WS2811 mode, solder the second and third pads of every solder bridge together.

Bill of Material

common anode mode

Item	Quantity	Link
Glas tube 30x60mm	x1	AliExpress Link
Red LED filament	x7	AliExpress Link
47 ohm resistors	x7	LCSC Link
8 2,54mm pinheader reverse bending 90°	x1	AliExpress Link

WS2811 mode

Item	Quantity	Link
Glas tube 30x60mm	x1	AliExpress Link
Red LED filament	x7	AliExpress Link
47 ohm resistor	x7	LCSC Link
100 ohm resistor	x3	LCSC Link
WS2811	x3	LCSC Link
8 2,54mm pinheader reverse bending 90°	x1	AliExpress Link

todo

• Add media.
• Write a library for arduino to use my segments in WS2811 mode.