v1.0.7

This is the last release of this kext! Please switch to acidanthera's VoodooPS2 kext: Link

v1.0.7

• cleaned up code and fixed some logic issues
• simplified finger count even more
• added middle trackstick button as pass-through
• enabled trackstick buttons on V1 and V2
• added pressure check for V1 and V2
• fixed bitmap processing
• fixed an issue where a special trackstick packet was not filtered out in V3
• improved V3 Rushmore bitmap processing
• fixed clang

1.0.6

v1.0.6

• added middle button scrolling for V8 tracksticks
• made V8 trackstick slower by cutting the speed in a third
• prevent the trackstick pressure from being saved in the touchpad pressure on V8
• removed ability to update logical dimensions in VoodooInput
  • After a while, V8 touchpads break for some reason. Removing fixes that. (Huge thanks to Jake Lo for testing)
• prevent unsupported V9 loading with V8 properties
• removed xupmm/yupmm scaling
• let all ALPS touchpads report their dimensions
• simplified V8 properties
• simplified fingerCount for V3, V4, V5, V7 and V8
• removed logical_min reporting
• touchpad will now enabled when it is restarted disabled
• touchpad will be disabled until probing is done
• removed VoodooInput support for V1, V2 and V6 touchpads
  • V1, V2 and V6 touchpads only report 1 finger, which is not enough to benefit from VoodooInput
• fixed touchpad not resetting completely after Ctrl+Alt+PrntScr combo
• fixed notification centre on V7 touchpads
• (BETA) added support for pressure report to enable Force Touch on V3, V4, V5 and V8 touchpads
  • set ForceTouchMode to 2 (3 or 4) inside Info.plist of VoodooPS2Trackpad to enable pressure support
• decreased FingerZ to 1
• fixed V3 Rushmore not initializing
• fixed V3 Rushmore not reporting 1 finger to VoodooInput
• refactored ALPS to ApplePS2ALPSGlidePoint

v1.0.5

v1.0.5

• synced code from acidanthera
  • updated project settings
  • keyboard and trackpad can be disabled via Cmd + PrtScr key combo
  • trackpad can be resetted by pressing Ctrl + Alt + PrtScr (useful for those who have broken trackpad after sleep)
  • PrntScr remap is disabled by default -> re-enable with SSDT-PrtSc-Remap.dsl
  • added NumLock support
• renamed VoodooPS2Controller and VoodooPS2Keyboard BundleIdentifier to acidanthera
• cleaned up project file
• set minimum version to 10.11 (El Capitan)
• resolution of touchpad gets saved as property
• touchpad version gets saved as property
• added support for V8 touchpads (huge thanks to forte500 for testing)
  • made V8 independent of alps_parse_hw_state
  • removed scaling for V8 touchpads
  • disabled pressure report for V8 touchpads
  • added more logging for V8
• removed resolution multiplier which was used on V8 for debugging reasons
• added 'Clickpad' property
• removed hard-coded capabilities of V8 touchpads
• Fixed an issue where otp values were stored in the wrong otp
• specified cmd manually on V8
• removed workaround for making trackpad larger on V8
• added 'Trackpoint' property for V8 touchpads
• added 'X/Y Max' and 'X/Y Res' property for V8 touchpads
• updated HIDScrollResolutionX
• fixed trackstick on V8 (huge thanks to PMD for testing)
• fixed touchpad not working after sleep (mainly for V8) (huge thanks to forte500 and PMD for testing)
• removed scaling for V7 touchpads
• do not probe on fail
• added kernel level USB and bluetooth mouse notifications
• force Force Touch to be disabled when ForceTouchMode is set to 1 and booted in recovery
• added inital partial support for V6 (not tested)
• made V6 independent of alps_parse_hw_state
• removed V6 reporting multiple fingers to VoodooInput
• disabled pressure support for V6
• disabled pressure support for V3/V5
• made V1/V2 independent of alps_parse_hw_state
• disabled pressure support for V1/V2
• added buttons back to V1/V2 to make buttons work when using trackstick
• made V4 independent of alps_parse_hw_state
• ported alps_report_semi_mt_data to V4
• disabled pressure support for V4
• use alps_fields for fingercount on V4
• removed alps_parse_hw_state
• removed redundant codes in set_protocol
• cleaned up alps header
• replaced 12.0 libkmod with 10.11
• fixed some unused codes

1.0.4

v1.0.4

• fixed random finger jumps with 2 fingers on V7
• made V7 independent from alps_parse_hw_state
• separated buttons to its own function
• replaced packetReady code with pre-VoodooInput
• added partial support for V3 and V5 (needs testing)
• removed some legacy codes

small tweaks

Changelog

• made version bumping easier
• ported codes from Linux
• removed warnings
• enabled Trackstick debugging for V8
• fixed packet size
• removed width support
• more debugging code
• added middle button support for V1 & V2
• added resolution multiplier for V8 trackpads
• cleaned up CI

Little Refinements

This release is a little refinement after experimenting with a lot of debugging.

Changelog

• ported some linux code for V8 (needs to be rewritten tbh)
• fixed VoodooPS2 not loading
• adjusted trackpad resolution for V7 (is a lot nicer)
• added debugging for V8
• made building much more simpler
• archive kext on build
• added VoodooInput on build (VoodooInput is now included)
• a lot of cleanup
• fixed left button only working when a finger was on the touchpad
• added middle button support

VoodooInput Support

This release was done in my private repo.

This release adds support for VoodooInput which is a Magic Trackpad 2 Emulator.
Do not forget too add VoodooInput to your config as well. Download VoodooInput from here.

This version only works with ALPS Touchpad V7

Changelog

• added VoodooInput support for V7 (Huge thanks to usr-sse2 for the code found in VoodooPS2SynapticsTouchpad; Inspiration of kprinssu)
• dropped all other versions (for now; not tested)
• Clean up finger counting logic
• support all gestures
• added physical button support for VoodooInput enabled touchpads
• added proper finger numbering
• fix notification center gesture by adding margins
• support up to 5 fingers
• small bug fixes
• updated some Linux codes
• added partial support for V1 {needs testing}
• added partial support for V2 {needs testing}
• added partial support for V3 {needs testing}
• added partial support for V4 {needs testing}
• added partial support for V5 {needs testing}
• added partial support for V6 {needs testing}
• added partial support for V8 {needs testing}
• implement trackstick buttons
• removed legacy codes
• rebranded to avoid confusion

Initial Release

Changelog

• upstreamed from 1Revenger1's repo (thanks to 1Revenger1)
• added smoother horizontal scrolling (thanks to icedman)