Robot calibration by LQR control

I set a specific target distance and allowed only a small angular variation between the camera and the AprilTag.

Step1

1. Run calibration.py in Camera_Calibration folder to get the camera parameters for AprilTag detection.

cd Desktop/
git clone https://github.com/StanleyChueh/Turtlebot_Calibration_AprilTag_LQR.git
cd Turtlebot_Calibration_AprilTag_LQR/
cd Camera_Calibration/
python3 calibration.py 

use the following board to calibrate:

Calibration board: Checkerboard-A3-40mm-9x6.pdf
You will get the result like the following image:

Step2

1. git clone

cd Desktop/
git clone https://github.com/Tinker-Twins/AprilTag.git

2. Place this script(On_Raspberry_Pi/AprilTag_Detection.py) in this directory

cd ~/Desktop/AprilTag/scripts

3. Make it executable

cd ~/Desktop/AprilTag
chmod +x ./install.sh

4. Run it

 cd ~/Desktop/AprilTag
 ./install.sh

5. Run AprilTag detection script

python3 AprilTag_Detection.py

6. You will see this result like the following images:

notice: Run this script on Raspberry pi for real world testing(ssh -X ubuntu@ip)

Step3

cd ~/Desktop/Turtlebot_Calibration_AprilTag_LQR/On_PC
python3 controller.py

make sure running controller.py and AprilTag_Detection.py at the same time

Demo

https://youtu.be/kR-14hI1RDw?si=alJUMj2gG6VjIJ3s

Reference

AprilTag detection: https://github.com/Tinker-Twins/AprilTag
Turtlebot: https://emanual.robotis.com/docs/en/platform/turtlebot3/overview/
ROS2 Foxy: https://docs.ros.org/en/foxy/Installation.html
LQR_Control: https://automaticaddison.com/linear-quadratic-regulator-lqr-with-python-code-example/#Conclusion