new example application demonstrating the new features

src/examples/DetectingTags.ino

@@ -8,16 +8,13 @@
 // ###                                                                       ###
 // #############################################################################
 
-//#include "logging.h"											// Toolkit to allow easy logging towards, eg. Serial UART
-//#include"NciToolkit.h"
 
 #include "PN7150Interface.h"									// NCI protocol runs over a hardware interface, in this case an I2C with 2 extra handshaking signals
 #include "NCI.h"												// Talking to the NFC module is done in an NCI language
 #include "NFCReaderWriter.h"									// Implementing a NFC Reader/Writer application
 
-//Logger theLog;												// creates a global object to log events, data, etc
 
-PN7150Interface	theInterface = PN7150Interface(14, 13);			// creates a global NFC device interface object, attached to pins 14 (IRQ) and 13 (VEN) and using the default I2C address 0x28
+PN7150Interface	theInterface = PN7150Interface(32, 14);			// creates a global NFC device interface object, attached to pins 32 (IRQ) and 14 (VEN) and using the default I2C address 0x28
 NCI theNCI(theInterface);										// creates a global NCI object, referring to the underlaying HW interface object. Application mode is set default to NciApplicationMode::CardReadWrite
 NFCReaderWriter theReaderWriter(theNCI);						// creates a global NFC Reader/Writer application object, referring to the underlaying NCI object.
 
@@ -26,44 +23,12 @@ void setup()
     delay(50);
     Serial.begin(115200);
     delay(50);
-
-    //theLog.outputIsAvailable = true;
+	Serial.print("\n\n\n\n");
 
     theReaderWriter.initialize();								// initialize the application object. It will will in its turn initialize the underlaying NCI object, and this one in its turn the HW interface object
     }
 
 void loop()
     {
     theReaderWriter.run();										// give the application object some CPU time to do its job. This is a non-blocking function
-
-    // When we get to a state where we detected one or more cards, print what we've found
-    if ((theNCI.getState() == NciState::RfPollActive) || (theNCI.getState() == NciState::RfWaitForHostSelect))
-        {
-        for (uint8_t cardIndex = 0; cardIndex < theReaderWriter.nmbrOfTags; cardIndex++)
-            {
-            Serial.print("Tag[");
-            Serial.print(cardIndex);
-            Serial.print("] : UniqueID = ");
-            for (uint8_t index = 0; index < theReaderWriter.theTags[cardIndex].uniqueIdLength; index++)
-                {
-                uint8_t theValue = theReaderWriter.theTags[cardIndex].uniqueId[index];
-                if (theValue < 16)
-                    {
-                    Serial.print("0x0");
-                    }
-                else
-                    {
-                    Serial.print("0x");
-                    }
-                Serial.print(theValue, HEX);
-                Serial.print(" ");
-                }
-            Serial.println("");
-            }
-
-        theReaderWriter.nmbrOfTags = 0;
-        delay(250);
-//		theNCI.deActivate(NciRfDeAcivationMode::IdleMode);
-        theNCI.initialize();
-        }
     }