Mulysa caller ID

esp32 + sim800l hardware for listening for incoming calls and asking mulysa if the number is allowed or not.

If the number is found to be allowed will pulse pin 23 for a while.

TODO: Better readme Pin toggling for relay depending on the numbers access status (how much delay?) Document hardware and everything else

Notes

ring "event"

Incoming call will say something like this

RING
+CLIP: "04404XXXXX",129,"",0,"",0

BUT only if CLIP is on. to se clip on issue

AT+CLIP=1

Or check the current status

AT+CLIP?

debugging the sim800l

• in loop uncomment loopBackDebug and comment everything else
• open screen with screen /dev/ttyUSB0 115200
• to get echoing say ATE1
• try out the AT commands