Skip to content

Telecominfraproject/oopt-tai

Repository files navigation

TAI (Transponder Abstraction Interface)


The Transponder Abstraction Interface, or TAI, defines the API to provide a form-factor/vendor independent way of controlling transponders and transceivers from various vendors and implementations in a uniform manner. It is based upon and quite common to the Switch Abstraction Interface, or SAI.

TAI is hosted by Telecom Infra Project (TIP) Open Optical and Packet Transport (OOPT) working group.


Architecture

TAI is an interface specification implemented as a collection of C-language header files. TAI adopts the use of many terms from SAI, including "Adapter" and "Adapter Host".

An Adapter is similar to a user mode driver. It translates the hardware independent TAI interface to a specific hardware implementation. This is implemented as a shared library, and will typically be provided by the module vendor. This shared library is called libtai.so. TAI library is used interchangebly with TAI adapter.

If the transponder supports multiple types of module hardware vendors, TAI multiplexer can be used to multiplex several kinds of TAI adapters. For details, see docs/TAI-MUX.pdf.

An Adapter Host is hardware independent software which uses the TAI interface to provide optical transponder functionality to other parts of the system. An adapter host loads the shared library adapter. TAI application is used interchangebly with TAI adapter host.

Some TAI adapters are open sourced in the implementation repo.

                      +------------------------+
                      |                        |
                      |      Adapter Host      |
                      |                        |
                      +------------------------+
                -------------TAI Interface-------------
                      +------------------------+
                      |                        |
                      |         Adapter        |
                      |                        |
                      +------------------------+
                --------------HW Interface-------------
                      +------------------------+
                      |                        |
                      |        Hardware        |
                      |                        |
                      +------------------------+

Components

  • inc/ : TAI API definition
  • meta/ : TAI meta library
    • TAI meta library provides helper methods for allocation, serialization etc..
  • tools/taish : TAI shell
    • TAI shell works as a TAI application and provides debug features for TAI library
  • tools/framework : TAI library framework
    • A framework to develop TAI library

The TAI Interface

The adapter host begins using TAI by invoking the tai_api_initialize() function. This function allows the adapter to initialize various data structures for subsequent use. It does not initialize the underlying hardware. There are two parameters passed to the tai_api_initialize() function: flags, which is currently unused and must be set to zero, and services.

services is a pointer to a structure of function pointers. This structure provides the adapter with function entry points (services) in the adapter host which the adapter can call. There is currently only one member in the structure, module_presence, which the adapter calls whenever there is a change in the presence or absence of modules in the system. As a matter of fact, the adapter will typically call the module_presence() function for each module in the system, perhaps even before returning from the tai_api_initialize() function. The module_presence() function may be called from a different thread than the main adapter host thread. And since TAI functions are not thread-safe, the adapter host is required make sure that it does not re-enter the TAI interface from the module_presence() function. This can be done by, for example, enqueueing the notifications for later processing on the main adapter host thread.

The tai_api_uninitialize() function is the inverse function to tai_api_initialize() and is called when the adapter host has completed all TAI interface processing. For example, just before exiting. This function will undo what was done in tai_api_initialize(), freeing memory, closing files, stopping threads, etc, in order to gracefully wrap up execution of the adapter.

After tai_api_initialize() returns successfully, the adapter host is free to call the other TAI APIs. It does this by first obtaining a list of function entry points for each API. There are currently three APIs:

  • Module
  • Network Interface
  • Host Interface

For each of these APIs, a list of function entry pointers is obtained by calling the tai_api_query() function. This function takes two parameters, tai_api_id, which identifies which of the three API's function pointers are being requested, and api_method_table, the address of a pointer which the adapter will set to point to the method table for that API.

A method table contains function entry pointers to the functions which implement the API. Currently, all three APIs have very similar method tables which contain six functions:

  • Create an object
  • Destroy an object
  • Set the value of an attribute of an object
  • Set the values for a list of attributes of an object
  • Get the value of an attribute of an object
  • Get the values for a list of attributes of an object

TAI Objects

Each API allows objects to be created through the create_xxx() method table function. This function creates an instance of the object and initializes its attributes. When an object is no longer needed the adapter host can call the remove_xxx() method table function, which will remove that object and its attributes. The set_xxx_attribute() function can be called once an object has been created to modify the value of one of the object's attributes. The get_xxx_attribute() function is used to retrieve the value of an object's attribute. The set_xxx_attributes() and get_xxx_attributes() functions (notice the 's' at the end of the function names) are provided for convenience to set and get a list of attributes in a single function call.

Module Objects

The module API allows module objects to be created. A module object represents an optical module. Calling the create_module() function causes the optical module to be initialized, which typically involves resetting the module and bringing it into a default state. This function must be called prior to creating host interface or network interface objects on a module. The create_module() function takes three parameters:

  • A pointer to a tai_object_id_t. The adapter will return a pointer to the newly allocated module ID object. The adapter host should treat this object as opaque. It will be used in subsequent TAI function calls.
  • attr_count and attr_list. A list of attributes which will be set upon the module object when it is created. This can be used to override the default attribute values for a module.

The attr_list supplied on the create_module() function call must contain a TAI_MODULE_ATTR_LOCATION attribute. This attribute defines which module is being created. This is typically set to the value of the module_location parameter from the module_presence() function.

An adapter host will typically call create_module() once for each module present in the system, as indicated when the adapter calls the module_presence() function.

Once the adapter host no longer needs to access the module it should call the remove_module() function. This can occur as the result of the module_presence() function being called indicating the module was removed, or when the adapter host is exiting, or whenever the adapter host feel like it. Removing the module simply makes it unaccessible to the adapter host. The actual state of the module is undefined. The adapter may put the module in reset, or may just leave the module in the same state it was prior to the remove_module() call. After calling remove_module() the object ID for the module which was returned in the create_module() function is invalid and should not be used in any subsequent TAI API calls.

Once the create_module() function returns with an object ID for a module, the adapter host can use this object ID to get and set attributes of the module with the get_module_attribute(), get_module_attributes(), set_module_attribute(), and set_module_attributes() function calls. Most of the module attributes are read-only and cannot be modified with the set_module_attribute() and set_module_attributes() functions.

Host interface objects and network interfaces objects are associated with the module on which they exist. This association is made when a host interface or network interface object is created, since the object ID of the associated module is a parameter of those create_host_interface() and create_network_interface() function calls. Because of this association, host interface and network interface objects should be removed by calling remove_host_interface() or remove_network_interface() prior to removing the module with which they are associated.

One of the attributes of a module object is the number of host interface and another attribute is the number of network interfaces. These values can be used when determining how many host interface objects and network interface objects exist on the module, and the index values used when calling create_host_interface() and create_network_interface().

Host Interface Objects

The host interface API allows host interface objects to be created. A host interface object represents an interface between an optical module and the host system, sometimes called client interfaces. Creating a host interface object allows the attributes of that interface to be set and retrieved. The create_host_interface() function takes four parameters:

  • A pointer to a tai_object_id_t. The adapter will return a pointer to the newly allocated host interface ID object. The adapter host should treat this object as opaque. It will be used in subsequent TAI function calls.
  • The module ID. Identifies the module ID upon which the host interface exists.
    This object ID was returned when the module was created.
  • attr_count and attr_list. A list of attributes which will be set upon the host interface object when it is created. This can be used to override the default attribute values for a host interface.

The attr_list must contain an TAI_HOST_INTERFACE_ATTR_INDEX attribute. This attribute defines which host interface is being created. This is a zero-based index of the host interfaces on a module.

An adapter host will typically call create_host_interface() once for each host interface present in the module, as indicated by the number of host interfaces, which is a module object attribute.

Once the adapter host no longer needs to access the host interface it should call the remove_host_interface() function. This can occur as the result of the module_presence() function being called indicating the module was removed, or when the adapter host is exiting, or whenever the adapter host feel like it. Removing the host interface simply makes it unaccessible to the adapter host. The actual state of the host interface is undefined. The adapter may put the
host interface in reset, or may just leave the host interface in the same state it was prior to the remove_host_interface() call. After calling remove_host_interface() the object ID for the host interface which was returned in the create_host_interface() function is invalid and should not be used in any subsequent TAI API calls.

Once the create_host_interface() function returns with an object ID for a host interface, the adapter host can use this object ID to get and set attributes of the module with the get_host_interface_attribute(), get_host_interface_attributes(), set_host_interface_attribute(), and set_host_interface_attributes() function calls.

Network Interface Objects

The network interface API allows network interface objects to be created. A network interface object represents hardware components which transmit/receive one wavelength. Creating a network interface object allows the attributes of that interface to be set and retrieved. The create_network_interface() function takes four parameters:

  • A pointer to a tai_object_id_t. The adapter will return a pointer to the newly allocated network interface ID object. The adapter host should treat this object as opaque. It will be used in subsequent TAI function calls.
  • The module ID. Identifies the module ID upon which the network interface exists. This object ID was returned when the module was created.
  • attr_count and attr_list. A list of attributes which will be set upon the network interface object when it is created. This can be used to override the default attribute values for a network interface.

The attr_list must contain an TAI_NETWORK_INTERFACE_ATTR_INDEX attribute. This attribute defines which network interface is being created. This is a zero-based index of the network interfaces on a module.

An adapter host will typically call create_network_interface() once for each network interface present in the module, as indicated by the number of network interfaces, which is a module object attribute.

Once the adapter host no longer needs to access the network interface it should call the remove_network_interface() function. This can occur as the result of the module_presence() function being called indicating the module was removed, or when the adapter host is exiting, or whenever the adapter host feel like it. Removing the network interface simply makes it unaccessible to the adapter host. The actual state of the network interface is undefined. The adapter may put the
network interface in reset, or may just leave the network interface in the same state it was prior to the remove_network_interface() call. After calling remove_network_interface() the object ID for the network interface which was returned in the create_network_interface() function is invalid and should not be used in any subsequent TAI API calls.

Once the create_network_interface() function returns with an object ID for a network interface, the adapter host can use this object ID to get and set attributes of the module with the get_network_interface_attribute(), get_network_interface_attributes(), set_network_interface_attribute(), and set_network_interface_attributes() function calls.

TAI Attributes

Each object has a list of attributes which are specific to that type of object. Each attribute is assigned an ID which is used to get or set the attribute's value. The TAI header files for each API list the attributes for each object, including descriptions of the format and access types. For example, the taimodule.h header file lists the module object attributes. The TAI_MODULE_ATTR_MAX_LASER_FREQ attribute, for example, has a short description (The TX/RX maximum laster frequency in Hz), the data type (tai_uint64_t), and the access rules (READ_ONLY). Unless otherwise stated, attributes can be set and retrieved at any time after the object is created and prior to its destruction. Modifying an attribute will commonly cause a modification in the operational state of a module. Refer to the taimodule.h, taihostif.h and tainetworkif.h files for a list of the attributes of each object type.

TAI Return Codes

Every TAI API function returns one of the codes in the taistatus.h file. Successful execution of the function is indicated by the TAI_STATUS_SUCCESS code. A failure is indicated by any value other than TAI_STATUS_SUCCESS.

When processing a list of attributes, the return code can indicate not just that a failure occurred, but also which attribute in the list caused that failure. The return codes TAI_STATUS_INVALID_ATTRIBUTE_0, TAI_STATUS_INVALID_ATTR_VALUE_0, TAI_STATUS_ATTR_NOT_IMPLEMENTED_0, TAI_STATUS_UNKNOWN_ATTRIBUTE_0, and TAI_STATUS_ATTR_NOT_SUPPORTED_0 are spaced out by 64K. Therefore, the least significant 16 bits of each of those error codes contains the index into the attribute list of the attribute which caused the error.