8.0.0

Device Protocol: 4.1.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

• Make the modules transfer the module protocol version and firmware version composed of a major, a minor and a patch number. MODULEPROTOCOL:MAJOR
• Query module key count and pointer count in separate messages instead of a combined message for improved clarity. MODULEPROTOCOL:MAJOR
• Add new UsbCommand_GetModuleProperties() device protocol command. DEVICEPROTOCOL:MINOR

7.0.0

Device Protocol: 4.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

• Make UsbCommand_JumpToModuleBootloader() more robust by not making it dependent on the state of the module driver.
• Don't make horizontal scrolling and vertical scrolling affect each other.
• Expose version numbers via the get property interface. DEVICEPROTOCOL:MINOR
• Add DevicePropertyId_ConfigSizes. DEVICEPROTOCOL:MINOR
• Remove DevicePropertyId_HardwareConfigSize and DevicePropertyId_UserConfigSize. DEVICEPROTOCOL:MAJOR

6.0.0

Device Protocol: 3.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

• Change the value of almost every Device Protocol commands because there were unused intervals between them. DEVICEPROTOCOL:MAJOR
• Disable LED display icons by default.
• Update LED brightness levels upon applying the configuration.

5.0.1

Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

• Make key presses continue to emit scancodes even if a USB interface (typically the mouse interface) is not polled by the host anymore.
• Make scrolling always immediately react to keypresses regardless of the previous internal scroll state.

5.0.0

Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

• Move pointerRole from keymaps to module configurations as pointerMode. Add angularShift, modLayerPointerFunction, fnLayerPointerFunction, and mouseLayerPointerFunction to module configurations. USERCONFIG:MAJOR

4.0.0

Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 3.0.0 | Hardware Config: 1.0.0

• Implement mouse movement and scrolling deceleration and acceleration.
• Toggle layers upon double tapping their keys. Make the double tap timeout configurable.
• Make the parser read additional user configuration properties: userConfigMajorVersion, userConfigMinorVersion, userConfigPatchVersion, doubleTapSwitchLayerTimeout, iconsAndLayerTextsBrightness, alphanumericSegmentsBrightness, keyBacklightBrightness, mouseMoveInitialSpeed, mouseMoveAcceleration, mouseMoveDeceleratedSpeed, mouseMoveBaseSpeed, mouseMoveAcceleratedSpeed, mouseScrollInitialSpeed, mouseScrollAcceleration, mouseScrollDeceleratedSpeed, mouseScrollBaseSpeed, mouseScrollAcceleratedSpeed. USERCONFIG:MAJOR

3.0.0

Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 2.0.0 | Hardware Config: 1.0.0

• Detect the use of USB interfaces and only wait for the ones that are actually used by the host.
• Implement key debouncer.
• Use the menu key in the factory keymap.
• Make pressing the reset button revert to the factory preset.
• Revert to the factory default state when the reset button is pressed upon firmware startup. Display FTY on the display in this case.
• Make the LED display show the abbreviation of the current keymap even when it gets reinitialized by the I2C watchdog.
• Swap SlaveCommand_RequestKeyStates and SlaveCommand_JumpToBootloader, thereby making SlaveCommand_JumpToBootloader the lower number because it's more essential and shouldn't change in the future. MODULEPROTOCOL:MAJOR
• Suppress pressed keys upon layer switcher key release.
• Handle secondary role modifiers and layer switchers.
• Make UsbCommand_JumpToSlaveBootloader expect a slave slot id instead of a uhkModuleDriverId. DEVICEPROTOCOL:MAJOR
• Set UsbResponse_InvalidCommand upon encountering with an invalid USB command. DEVICEPROTOCOL:MINOR
• Remove UsbCommandId_ReadMergeSensor now that it can be queried via UsbCommandId_GetKeyboardState. DEVICEPROTOCOL:MAJOR
• Make the getAdcValue and getDebugInfo USB commands utilize the first byte of the response to provide status as dictated by the UHK protocol. DEVICEPROTOCOL:MAJOR
• Switch keymap only upon keypress.
• Handle layer toggle actions.
• Keep the active layer active even if another layer switcher key gets pressed while holding it.
• Read the new UserConfig.userConfigLength user config field. USERCONFIG:MAJOR
• Change Ctrl and Alt back according to the official UHK factory keymap.
• Update system keyboard HID descriptor which doesn't make the pointer go to the top left corner on OSX anymore.
• Scan keyboard matrices in a more efficient manner from timer interrupts instead of the main loop.
• Add UsbCommand_SendKbootCommand. DEVICEPROTOCOL:MINOR
• Make the reenumerate USB command accept a timeout value. DEVICEPROTOCOL:MINOR
• Make the config parser read the device name. USERCONFIG:MAJOR
• Update release file format containing device and module directories and hex files instead of srec.
• Remove obsolete ARM GCC build files.

2.1.0

Device Protocol: 1.2.0 | Module Protocol: 2.1.0 | User Config: 1.0.0 | Hardware Config: 1.0.0

• Add jumpToSlaveBootloader USB and Module Protocol command. DEVICEPROTOCOL:MINOR MODULEPROTOCOL:MINOR
• Fix generic HID descriptor enumeration error.

2.0.0

Device Protocol: 1.1.0 | Module Protocol: 2.0.0 | User Config: 1.0.0 | Hardware Config: 1.0.0

• Read the hardware and user configuration area of the EEPROM upon startup and set the default keymap.
• Greatly improve the I2C watchdog and drivers. Communication between the halves or the add-ons should never fail again.
• Implement generic enumeration sequence and per-slave state for UHK modules, allowing add-ons to be added. MODULEPROTOCOL:MAJOR
• Make the master cache the output fields of slave modules, allowing for more frequent input updates.
• Optimize I2C protocol scheduler resulting in increased roustness and more efficient use of I2C bandwidth.
• Add I2C message headers containing a length header, allowing for variable-length messages and a CRC16-CCITT checksum, allowing for robust communication. MODULEPROTOCOL:MAJOR
• Add mechanism to dump the internal state of the KL03 via SPI for debugging purposes.
• Add merge sensor state and attached module IDs to GetDebugInfo(). DEVICEPROTOCOL:PATCH
• Throw ParserError_InvalidKeymapCount if keymapCount == 0. USERCONFIG:PATCH

1.0.0

Device Protocol: 1.0.0 | Module Protocol: 1.0.0 | User Config: 1.0.0 | Hardware Config: 1.0.0

• First Release