Instructions

Image slideshow on Raspberry Pi Zero

1. Burn Raspbian lite to SD card & configure

• Create wpa_supplicant.conf and ssh file in /boot if setting up without keyboard / headless.

sudo raspi-config

• Change User Password

• Network Options:

  • Hostname
  • Wi-fi

• Boot Options

  • Desktop / CLI
    • Console Autologin

• Interfacing Options

  • SSH

• Advanced Options

  • Overscan - disable

• Update

  sudo apt-get update
  sudo apt-get upgarde

2. Install Samba

sudo apt-get install samba

sudo smbpasswd -a pi

mkdir /home/pi/Reklama

sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.old
sudo nano /etc/samba/smb.conf

Add this to the very end of the file:

[Reklama]
Comment = Reklama Delfin
Path = /home/pi/Reklama
valid users = pi
read only = no
Guest ok = no
Writeable = Yes
Browseable = yes
Public = yes

3. Install fbi

sudo apt-get install fbi inotify-tools
touch dirwatch.sh
chmod 777 dirwatch.sh
nano dirwatch.sh
sudo nano /etc/profile

Add this to the very end of the file: . /home/pi/dirwatch.sh

Copy contents of dirwatch.sh to RPi

4. Set up safe shutdown

Copy shutdown.py to /home directory

Add: python /home/pi/shutdown.sh & to /etc/rc.local

Make this circuit:

Connect the signal wire to Raspberry GPIO14 pin.

Accessing samba share from Windows:

• Must be in the same network:

This PC > Add a network location > \\[HOSTNAME].local\Reklama

in my case: \\REKLAMA.local\Reklama