FlatSat-XK07

Firmware Files for the XK07 (CW01 and CS11)

Watch this YouTube video

Flashing Steps:

1. Connect ☒IP01 and ☒CW01 together
2. Insert ☒IP01 and ☒CW01 into an available USB port
3. Wait for eventual drivers to be installed, if driver installation fail, goto USB Driver
4. Execute the xFlasher
5. Choose Firmware.
6. Choose your COM port. If no COM port is available, goto USB Driver
7. Click Flash
8. Unplug ☒IP01 and ☒CW01

Configuration Steps:

1. Connect ☒IP01, ☒SW01, ☒SL01, ☒CW01 and optionally ☒OD01 together
2. Insert into USB power source
3. Within 3 minutes, connect to the ☒CW01, connect a device to WiFi AP: XINABOX_<number>. Password is password
4. On some devices a captive portal will show up, but if doesn’t, simply browse to http://192.168.4.1
5. Follow the configuration screens and for better usage, complete all fields as accurate as possible
6. Upon successful connection, the OLED display ☒OD01 will show connectivity information for 1 min, before collecting data.

Note: You must fill in DeviceName and all other required fields, otherwise you will not see any data

Dashboard Steps:

Video 8m33s-

1. Watch the video at least the first 1-2 min

Notes:

LEDs:

• Solid 🔵 means hotspot active, waiting for your connection to XINABOX_<number>. Timeout after 3 min.
• Solid 🍏 means that the WiFi is connected
• Flashing 🔴 means lost WiFi connectivity
• Flashing 🔵 means conectivity to our MQTT server is lost

USB Driver

If you have issues with USB drivers for the ☒IP01, then go here ☒IP01, and install the driver from the drivers folder.

WiFi Connection

• Since the ☒CW01 doesn't have a keyboard and a screen, and still needs to be configured, the ☒CW01 will initiate an access point or hotspot allowing you to configure the unit.
• Certain devices doesn't like to connect to a hotspot without a password, so we have given a simple password. Since the ☒CW01 doesn't connect to the internet during this process, there are no security risk in this phase.
• The ☒CW01 only supports WPA/WPA2 Personal, which means just a Password. We are working on WPA/WPA2 Enterprise, where both Username and Password is used.
• While every effort has been made to avoid security issues, such as disabling Over The Air update (for now), no warranty can be given.

License

See the LICENSE "MIT License” file for license rights and limitations (MIT).